Italy – Gas generators – Supply, Installation and maintenance of a PEM Electrolyser for Hydrogen Production at JRC Ispra

Italy – Vascular prostheses – ENDOPROTESI VASCOLARI ADDOMINALI E (KIT EMERGENZE) III EDIZIONE

Italy – Health and safety consultancy services – Servizi di consulenza nel campo della salute e sicurezza sul lavoro e dell'ambiente presso il Centro Comune di Ricerca, sito di Ispra (Italia)

Italy – Restructuring work – PPP

Italy – Overhaul and refurbishment work – Misura PNRR M7 - I.17_Comune di Cerignola varie vie

We require a rotating machine manufacturer to design, build and install a 5MVA 11kV 50Hz to 6.6kV 60Hz Rotary Frequency Convertor. Both machines shall be synchronous with a mechanical coupling joining the 10-pole motor to the 12-pole generator. There is a requirement to be able to physically rotate the generator stator to enable manipulation of the phase and load angle via racking motor or actuator. The machine should come complete with a starting reactor and contactor connected to the neutral point of the motor, to limit the inrush current on startup to approximately 400A. Control of the machine starting reactor and racking equipment shall be by an external control system, which shall not form part of the machine scope of supply.

Italy – Plumbing and sanitary works – Rinnovo, ristrutturazione, costruzione, manutenzione ordinaria e straordinaria degli impianti idrosanitari, termici, di gas e di scarico del sito JRC di Ispra (VA)