Alternatives to Advanced Materials for Miniaturised Energy Harvesting Systems

Expected Outcome: Fully sustainable regional bioenergy value chains and efficient conversion can play an important role in renewable efficient power and heating generation and for reaching the EU climate and energy targets and contribute to European competitiveness and energy security. Project results are expected to contribute to at all of the following expected outcomes: The demonstration of regional value chains for the use of locally to regionally sourced sustainable and cheap solid biofuel from upgraded biogenic residues and wastes in line with the provisions of the Renewable Energy Directive in high efficiency CHP plant creates opportunities for SMs, regional value generation and European knowledge advancement and international competitiveness in the sector. Provide flexible renewable power and heat to local industries for their processes and allow for high penetration of renewables in the energy system by ensuring sustainable bioenergy base load capacity. Provide replicable solutions, where bioeconomy stakeholders can benefit from the knowledge generated for the development of their strategies aligned with energy and environmental policy objectives and which can contribute…

Expected Outcome: Project results are expected to contribute to all of the following expected outcomes: Extended service life and reduced life cycle environmental impacts of existing buildings, contributing to a more sustainable [1] built environment [1] . Easier application and more frequent use of predictive maintenance in existing buildings. Scope: Prolonging the lifespan and improving the performance of existing buildings are among key strategies to decrease new construction rates, which will help reduce the extraction of raw materials, manufacturing of new construction products, generating less waste and thus reducing GHG emissions and contributing to a more sustainable built environment. Recent legal and policy developments such as the recast Energy Performance of Buildings Directive (EPBD) reinforce the importance of preserving and upgrading existing buildings as part of Europe’s climate and circular economy [1] objectives. However, maintenance and repair intervention are often reactive, which can lead to inefficiencies and a lack of environmental sustainability. They can also take time, be costly and disruptive for the building’s users and inhabitants as they can cause…

Modification 000002: Updated Appendix A and the definition of “Construction and demolition waste”, also denoted as “C&D Waste”, to align with the programmatic authorizing statute for the Alternative Fuels and Feedstocks Office listed in NOFO Part 1, Section III.G. Statutory Authority. • “Construction and demolition waste,” for the purposes of this NOFO and consistent with the statutory authorities1, refers to waste organic materials from buildings, roads and bridges, and other sectors, but not included in municipal solid waste. It includes wood waste materials, including waste pallets, crates, dunnage, manufacturing and construction wood wastes (other than pressure-treated, chemically-treated, or painted wood wastes), and landscape or right-of-way tree trimmings. Updated Section III.D. Key Requirements and Section III.F. Applications Specifically Not of Interest to specify that target chemicals should have global annual markets or potential markets of at least 1 million metric tons. • Previously this metric was given as U.S. production of at least 1 million metric tons. Modification 000001: Moved the application content requirement for Letter(s) of Commitment (LOCs) from Stage 2 to Stage 1. • Added a clause in Section III.D indicating that LOCs are to be submitted with Stage 1 applications. • Updated the summary table in Section IV.D.2 to reflect the above (added Stage 1 LOC requirement) • Updated the summary table in Section IV.E.1 to reflect the above (added “(as needed, in addition to Stage 1 submittals)”). DOE CMEI is dedicated to securing America’s energy future by reinforcing domestic critical mineral supply chains, driving next-generation energy technology and manufacturing research, and promoting affordable, consumer-friendly solutions. CMEI’s AFFO is issuing this ASPECT NOFO, DE-FOA-0003647, to support research, development, and pre-pilot testing of innovative technologies that produce chemicals from alternative and waste feedstocks, mobilizing America’s abundant alternative feedstocks resources. The goal of this Notice of Funding Opportunity (NOFO) is to advance promising chemical technologies that utilize alternative feedstocks through multiple levels of maturity and, in some cases, to pre-pilot scale. To accomplish this, the NOFO is divided into two topic areas, each divided into two subtopic areas designed to provide different on-ramps for technologies at different stages of development. Topic Area 1 supports the progression of technologies in the R&D phase. Subtopic Area 1a supports advancing early-stage research to bench scale. Subtopic Area 1b is intended to move projects closer to pre-pilot scale, to a point where critical unit operations must be further developed and demonstrated. Topic Area 2 provides an on-ramp for technologies ready to move from R&D to full pre-pilot scale and operations. Projects applying to Topic Area 2 should aim to advance their technology to design, construct, and operate pre-pilot scale facilities. Both subtopic areas have the same goal—to move technologies into integrated pre-pilot systems and operate them—but allow for two different points of entry. Subtopic Area 2a targets preliminary pre-pilot scale testing of critical unit operations before engineering and design can commence for the entire system while Subtopic Area 2b projects will involve technologies that are ready for design and construction of an integrated pre-pilot facility. Please see the full NOFO document at eere-exchange.energy.gov. Questions regarding the NOFO must be submitted to ASPECT@doe.gov. The required Concept Paper due date for this NOFO is 10/09/2026 at 5PM ET. The Full Application due date for this NOFO is 12/01/2026 at 5PM ET. As stated in the Notice of Intent (search DE-FOA-0003646 in eXCHANGE), a Teaming Partner List has been compiled to encourage collaboration and facilitate the formation of new project teams. Visit: TPL-0000073 Teaming Partner List for DE-FOA-0003646 NOI to Publish DE-FOA-0003647 The eXCHANGE system is currently designed to enforce hard deadlines for Concept Paper and Full Application submissions. The APPLY and SUBMIT buttons automatically disable at the defined submission deadlines. The intention of this design is to consistently enforce a standard deadline for all applicants. Applicants that experience issues with submissions PRIOR to the NOFO Deadline: In the event that an Applicant experiences technical difficulties with a submission, the Applicant should contact the eXCHANGE helpdesk for assistance (exchangehelp@hq.doe.gov). The eXCHANGE helpdesk and/or the EERE eXCHANGE System Administrators (eXCHANGE@ee.doe.gov) will assist the Applicant in resolving all issues. Applicants that experience issues with submissions that result in a late submission: In the event that an Applicant experiences technical difficulties with a submission that results in a late submission, the Applicant should contact the eXCHANGE helpdesk for assistance (exchangehelp@hq.doe.gov). The eXCHANGE helpdesk and/or the EERE eXCHANGE System Administrators (eXCHANGE@ee.doe.gov) will assist the Applicant in resolving all issues (including finalizing the submission on behalf of, and with the Applicant's concurrence). DOE will only accept late applications when the Applicant has a) encountered technical difficulties beyond their control; b) has contacted the eXCHANGE helpdesk for assistance; and c) has submitted the application through eXCHANGE within 24 hours of the NOFO's posted deadline.

Expected Outcome: The successful proposal is expected to further contribute to the expected outcomes specified in topic HORIZON-CL6-2024-GOVERNANCE-02-01: European Partnership of Agriculture of Data, for continuation of the activities in line with already agreed outcomes. Scope: The objective of this action is to continue to provide support to the European partnership of Agriculture of Data identified in the Horizon Europe Strategic Plan 2021-2024 and first implemented under the topic HORIZON-CL6-2024-GOVERNANCE-02-01: European Partnership of Agriculture of Data, and in particular to fund additional activities (which may also be undertaken by additional partners) in view of its intended scope and duration, and in accordance with Article 24(2) of the Horizon Europe Regulation. The consortium which applied to and received funding under HORIZON-CL6-2024-GOVERNANCE-02-01: European Partnership of Agriculture of Data is uniquely placed to submit a proposal to continue the envisioned partnership. Not only did this consortium submit the proposal leading to the identification of the partnership in the Horizon Europe strategic planning 2021-2024, it has also been implementing the…

Silicon Carbide Cladding Lead Test Rod Development-Phase 1Research, development, and fabrication of Silicon Carbide cladding specimens for research reactor insertion, irradiation, and post-irradiation examinations by 2030. The objective of this program is to advance the scientific and technological maturity of silicon carbide cladding for nuclear fuel rods for future use in commercial light water reactors.

Expected Outcome: This action will advance Europe’s leadership in trapped-ion quantum computing by achieving the following key outcomes: Establishment of a full-stack ion-trap quantum computer aiming at more than 1.000 qubits, fully integrated into high-performance computing (HPC) systems, and accessible via the cloud. Demonstration of quantum advantage for selected real-world applications, validated against benchmarks. Strengthened European capabilities to develop modular, interoperable, and scalable quantum computing architectures. Implementation and demonstration of advanced error correction and fault-tolerant quantum computing techniques. Integration of full-stack hardware-software systems with standardised and certified interfaces. Engagement with industry and academia through open access to quantum computing resources and co-design of applications. Scope: The action should support the scale-up of European trapped-ion quantum computing platforms, aiming at technological maturity and usability for industrial and scientific applications. In particular, the action must address at least two major technical roadblocks defined in the Strategic Research and Industry Agenda (SRIA…

Expected Outcome: This action will establish a pan-European open-access testing and experimentation infrastructure for quantum technologies, enabling systematic validation and certification of quantum components and systems. Expected outcomes include: Deployment of distributed quantum testing facilities accessible across Europe, including remote access and standardized test protocols. Provision of certification services aligned with future standardisation efforts, ensuring trust, quality, and interoperability of quantum technologies. Support for SMEs, start-ups, and research institutions in validating quantum components and sub-systems. Strengthening of Europe’s competitiveness by ensuring robust quality assurance mechanisms and accelerating the time-to-market of emerging quantum products. Scope: The proposal should implement the testing-related part of the action plan established under the Framework Partnership Agreement for Qu-Test. The action must include: Expansion and interconnection of open-access testing facilities in multiple Member States, covering a range of quantum technologies (e.g., processors, sensors, photonics, control systems). Development and deployment of…

Expected Outcome: Project results are expected to contribute to all of the following expected outcomes: Public authorities, industry, technology providers, energy producers and consumers profit from de-risking of cost-effective essential value chains of those renewable fuel technologies that can contribute to domestic commercial fuel production beyond 2030 customized to their needs, from improved access to better financing exploiting synergies across funding schemes, and from more effective market uptake, business models, increased competitiveness, and commercialization opportunities. Energy producers, clean tech manufacturing industries, researchers and consumers benefit from improved performance, lower environmental impact, security and competitiveness of ad-hoc renewable fuel technologies compared to existing ones, as well as new market opportunities. Community, public authorities and industry benefit from sharing the de-risking cost and reducing it by engaging several competing solution suppliers/technology providers in parallel, boosting transnational public and private investments in de-risking and attracting new players to tackle supplier lock-in issues The implementation…

Expected Outcome: This action aims to establish European leadership in neutral-atom quantum simulation and digital quantum computing by delivering: Fully programmable industry-ready quantum simulators based on 10.000 neutral atoms in a scalable architecture, accessible via cloud platforms, and with the possibility of integrating them into high-performance computing environments. Fully programmable platform for neutral-atom quantum computing capable of both analogue quantum operations and gate-based computing with 1.000 physical qubits and a clear path to further scalability to 10.000 physical qubits. Coherence time of the order of hundreds of interaction times and infidelity of operations below 1%. Demonstration of quantum simulation and/or computing operating beyond classical computability, validated through benchmarking with classical methods. New real-world applications across science and industry (at least two) (e.g: in the energy and health sectors) The software stack for these applications, including enhanced software for verification, algorithm implementation, and user programming interfaces. Demonstration of the full quantum stack – including quantum control, electronic…

Expected Outcome: This action will strengthen Europe's leadership and strategic autonomy in quantum technologies by advancing experimental pilot line capacities as a vital stepping stone toward future industrial-scale quantum hardware production. Qu-Pilot serves as the critical intermediary between academic research and the stable pilot lines under the Chips Joint Undertaking, offering a testbed for technological innovation, reproducibility, and manufacturability. Expected outcomes include: Deployment of experimental quantum pilot lines addressing diverse platforms and materials, laying the groundwork for broader integration into Chips JU pilot lines. Establishment of scalable and reproducible quantum fabrication processes, advancing TRL 4–6 technologies and addressing early-stage certification, standardisation, and quality control. Reinforcement of a pan-European quantum hardware ecosystem through shared infrastructure and open-access models, fostering participation from SMEs, startups, and research institutes. Demonstrated ability to accelerate technology maturity and feed critical feedback loops into future Chips JU stability pilot lines. Enhanced synergies with testing…

Expected Outcome: Projects are expected to contribute to all the following expected outcomes: Effective and innovative methods for gathering, sharing and using large data sets in energy applications for the purpose of training AI models while ensuring privacy and security. Advanced and - wherever possible - open-source AI foundation models to support the digitalisation of the energy system, through improved grid observability, forecasting of supply and demand, advanced storage and renewables integration, demand side flexibility and energy efficiency. Enhanced cooperation, knowledge sharing and interoperability among energy system actors for secure and seamless data exchange. Advanced methodologies for AI model development ensuring that the results are FAIR (Findable, Accessible, Interoperable, Reusable) beyond the project ending, open source and accommodating for technology evolution. Scope: The quality of AI models depends strongly on the amount, quality, and representativeness of the data used for their training. Projects are expected to focus on developing, training and testing AI foundation models, using extensive data sets to accelerate the energy transition in key focus…

Expected Outcome: This action will consolidate Europe’s position in superconducting quantum computing through: Establishment of a full-stack superconducting quantum computer aiming at 1.000 physical qubits and QPU architecture based on chiplet technology. The system should feature a scalable and user-adjustable architecture, T1 coherence time above 100 us, gate fidelities (both one- and two-qubit gates, and read-out) of at least 99.9%, read-out speed below 300 ns, two-qubit gate speed below 20 ns. Demonstration of quantum advantage on selected industrial use cases, validated through benchmarking with best-in-class classical methods. Deployment of a cloud-accessible quantum system integrated with high-performance computing environments. Maturation of fault-tolerant quantum computing protocols, including effective quantum error correction and noise mitigation schemes. Delivery of a comprehensive, standardised software stack supporting system bring-up, calibration, control, benchmarking, and user access. Strengthened supply chains and industrial capacity in Europe for superconducting quantum technologies. Scope: The proposal should contribute to the scale-up and practical deployment…