Alternatives to Energy efficient urban and sub-urban public transport, complemented by shared mobility

Expected Outcome: The proposals under this topic should address the design/specification and implementation/testing of the key microelectronics building blocks of an FR3 FEM paving the way towards their future integration into a complete integrated FEM system. • Progresses the State of the art to optimise the cost-performance trade off to serve the target ITU IMT 2030 specifications, notably for what concerns maximum data rate, user data rate, spectral efficiency, whilst enabling 50% mobile transmission system energy consumption; • Allows operational implementation of spectrum sharing with other spectrum users within the selected FR3 sub-band; • Enables large arrays integration for increased path loss compensation at FR3 frequencies with very compact, low power, high efficiency FEM integration; • Enables high bandwidth for carrier aggregation with broadband RF transceivers; • Enables SBFD (Sub-Band non overlapping Full-Duplex) for UL coverage extension (Rel.-19 5G-Advanced in 3GPP) with appropriate interference cancellation techniques; • Enables ISAC (Integrated Sensing and Communications) supporting monostatic as well as bistatic radar functionality, and addressing interference…

Expected Outcome: Project results are expected to contribute to all of the following expected outcomes: Based on the results of the project, at least one industrial sector with a significant heating demand in the EU and Associated Countries develops pathways and business models to measurably increase the recovery and upgrade of locally available heat for covering process needs and significantly or totally phasing out of fossil fuel use, while preserving or enhancing its global competitiveness. Measurable improvement of renewable and/or industrial excess/waste heat recovery and upgrade solutions, possibly combined with thermal and/or electrical energy storage, in terms of energy efficiency, flexibility of electrical demand, climate and environment protection, reliability and safety, physical and cyber security, and profitability. Scope: This topic aims to satisfy the need for process heat in the more industrial sectors by upgrading excess/waste heat from the process itself, possibly combined with heat recovered in nearby locations or local renewable heat, as a cost-efficient way to improve energy efficiency and reduce the GHG emissions and air pollutants and the use of fossil…

Expected Outcome: Project results are expected to contribute to all of the following expected outcomes: Measurable reduction in the costs of deep renovation compared to current best practices; Measurable increase in resource and energy efficiency compared to current best practices; Measurable reduction in the number of days when occupants are disturbed due to renovation works; Measurable reduction of dust, noise, waste and pollutant and greenhouse emissions on the construction site compared to current best practices. Scope: Meeting Europe’s ambition for the renovation of the housing stock requires innovative approaches that improve buildings’ energy performance and occupants’ satisfaction, at a reduced cost while speeding up the renovation process and minimising impact on the construction site and disturbance for occupants. Renovation approaches should cover the whole workflow from design, off-site manufacturing and on-site installation to strategies for maintenance, operation and end of life. Proposals are expected to address all of the following: Demonstrate cost-effective approaches (comprising design, planning and construction processes and techniques) for deep renovation to…

Expected Outcome: Successful proposals will contribute to the Circular Economy Action Plan, the Chemicals Strategy for Sustainability, the Ecodesign for Sustainable Products Regulation, the Chemical Industry Action Plan, and the Clean Industrial Deal. Projects results are expected to contribute to the following expected outcomes: Wider availability of bio-based thermoset materials meeting high technical performance requirements. Improved circularity of thermosets and downstream application(s) against specified market benchmarks taking into account production, use and EoL. Scope: Bio-based thermosets have a proven capability to achieve challenging technical performances for high demanding applications including transport, energy, electronics, among others. However, due to their cross-linking nature, the recycling of thermoset materials (including composites) is more challenging without compromising the technical performances. Thus, eco-designing bio-based thermoset materials to be both circular and high-performing remains a significant challenge in scaling-up towards competitiveness and higher sustainability. Some of the key challenges to address for bio-based thermosets include…

Expected Outcome: Project results are expected to contribute to all of the following expected outcomes: Increased number of building information tools, assessments and/or certificates makes use of digital data exchange platforms; More accurate and reliable EU-aligned life cycle inventories of embodied environmental flows in construction materials and products; Increased number of already existing building standards and certification schemes refer to GWP to support national decarbonisation strategies in line with relevant European legislation (such as Energy Performance of Buildings Directive, Construction Products Regulation and delegated acts, voluntary label for carbon footprint of steel, Delegated Act for carbon removal certification in long-lasting products); Improved data availability and interoperability for whole life carbon assessments across different building lifecycle stages. Scope: The Energy Performance of Buildings Directive (EPBD) recast places an increased emphasis on addressing whole life carbon and the calculation of the global warming potential (GWP) of buildings as part of its holistic approach to enhancing building sustainability. Several projects have focused…

Expected Outcome: Project results are expected to contribute to all of the following expected outcomes: Measurable increase in the number of tools and solutions at district or city level that are supporting the application of circular economy models by public and private stakeholders active in the construction sector; Measurable reduction of material use and an increase of reuse and recycling in the construction sector as a result of the introduction of new and replicable business models; Measurable reduction in the energy and other resources use and the whole life-cycle GHG emissions of buildings [1] and building stock (residential and non-residential) by introducing circular economy activities at building, district and city level. Scope: Applying circularity principles in the construction sector at building, district and city level can reduce the whole life-cycle GHG emissions and support more efficient resource use of the building stock, and help deliver climate-neutral, smart and circular cities, and a more sustainable built environment. To achieve this, there is a need for tools, solutions and associated business models with market potential that facilitate the adoption of…

Expected Outcome: The projects are expected to deliver on one of or combination of the following topic outcomes: Faster transition of district heating systems towards low-temperature operations Faster transition of building heating systems towards low-temperature operations Increased use of renewable energy and/or waste heat. Scope: Low-temperature district heating systems in urban areas offer higher potential for integration of renewable energy sources and waste heat, but their deployment is slowed down because the existing stock of inefficient buildings has been designed for high-temperature heat delivery systems. The topic supports the creation of the conditions necessary for the conversion of existing supply solutions – district heating, as well as individual heating ones – into low-temperature alternatives, along with reducing and optimising the heat load of buildings. Efficient district heating systems are expected to meet increasingly stringent criteria in terms of the use of renewable energy, waste heat and/or co-generation in line with Article 26(1) of the Directive (EU) 2023/1791. To help district heating operators meet those criteria, there is a need to demonstrate…

Expected Outcome: Project results are expected to contribute to all of the following expected outcomes: Extended service life and reduced life cycle environmental impacts of existing buildings, contributing to a more sustainable [1] built environment [1] . Easier application and more frequent use of predictive maintenance in existing buildings. Scope: Prolonging the lifespan and improving the performance of existing buildings are among key strategies to decrease new construction rates, which will help reduce the extraction of raw materials, manufacturing of new construction products, generating less waste and thus reducing GHG emissions and contributing to a more sustainable built environment. Recent legal and policy developments such as the recast Energy Performance of Buildings Directive (EPBD) reinforce the importance of preserving and upgrading existing buildings as part of Europe’s climate and circular economy [1] objectives. However, maintenance and repair intervention are often reactive, which can lead to inefficiencies and a lack of environmental sustainability. They can also take time, be costly and disruptive for the building’s users and inhabitants as they can cause…

Expected Impact: Framework Partnership Agreements for non-profit making entities under the LIFE programme aim to strengthen the participation of civil society in the EU policy dialogue, as well as to support implementation and enforcement of Union environmental and climate objectives, including clean energy transition, by the beneficiaries. Objective: LIFE Framework Partnership Agreements with non-profit making entities aim to strengthen the participation of civil society in the EU policy dialogue, as well as to support implementation and enforcement of Union environmental and climate objectives by the beneficiaries. The present call for proposals targets framework partnerships aimed at achieving the objectives of the Circular Economy and Quality of Life, Nature and Biodiversity, Climate Change Mitigation and Adaptation and Clean Energy Transition LIFE sub-programmes. In line with Recital 23 of the LIFE Regulation, the LIFE Framework Partnership Agreements aim at “support[ing] a broad range of NGOs [non-governmental organisations] as well as networks of non-profit-making entities that pursue an aim which is of general Union interest, and that are primarily active in the area of…

Expected Impact: By the end of the project: at least substantial contribution to the implementation of the targeted plan/strategy, and mechanisms established to ensure full implementation of the plan/strategy. After the project: Full implementation of the plan/strategy. In relation to those expected impacts, applicants are expected to define, calculate, explain and achieve the expected impacts as described in Award criterion ‘Impact’ of the full proposal evaluation ( see Call document ). Objective: Target the implementation of one or more of the following plans/strategies: Final updated National Energy and Climate Plans (NECP) and Long-Term Strategies (LTS) pursuant to Regulation on the governance of the energy union and climate action (EU) 2018/1999. National adaptation strategies and plans pursuant to Article 5 of the Regulation 2021/1119 (‘European Climate Law’), or regional adaptation strategies or action plans. Urban or community-based action plans pioneering the transition to a climate neutral and/or climate resilient society, - including climate-neutral cities plans and actions, for instance in the context of the EU Mission ‘Climate neutral and smart cities’ and Sustainable…

Expected Impact: Proposals should present the concrete results which will be delivered by the activities and demonstrate how these results will contribute to the topic-specific impacts. This demonstration should rely on a solid analysis of the current situation, realistic assumptions and baselines, and establish clear causality links between activities, results and impacts. In terms of qualitative impact, proposals under this topic should demonstrate how they will contribute to the following outcomes, as relevant: delivering financing schemes that are operational and ready to finance investments, with credible access to financing sources and a prospective pipeline of investments increasing the investibility of energy efficiency projects (potentially combined with renewable energy and energy storage) for private financing sources accelerating investments in energy efficiency. In terms of quantitative impact, proposals should quantify their results and impacts using the indicators provided for the topic, when they are relevant for the proposed activities. Proposals are not expected to address all the listed impacts and indicators. The results and impacts should be quantified for the…

Expected Impact: Proposals should present the concrete results which will be delivered by the activities and demonstrate how these results will contribute to the topic-specific impacts. This demonstration should rely on a solid analysis of the current situation, realistic assumptions and baselines, and establish clear causality links between activities, results and impacts. In terms of qualitative impact, proposals under this topic should demonstrate how they will contribute to the reduction of (summer) energy poverty for the targeted households (Scope B) and the development of successful coordination structures (Scope A), which can be replicated in other regions or Member States. Prebound/rebound effects should be taken into account and factored in the quantification of impacts, where relevant. In terms of quantitative impact, proposals should quantify their results and impacts using the indicators provided for the topic, when they are relevant for the proposed activities. Proposals are not expected to address all the listed impacts and indicators. The results and impacts should be quantified for the end of the project and for 5 years after the end of the project. The…