Alternatives to Low disturbance prefabrication approaches for deep renovation of multi-storey buildings (Built4People Partnership)

Expected Outcome: Project results are expected to contribute to all of the following expected outcomes: Based on the results of the project, at least one industrial sector with a significant heating demand in the EU and Associated Countries develops pathways and business models to measurably increase the recovery and upgrade of locally available heat for covering process needs and significantly or totally phasing out of fossil fuel use, while preserving or enhancing its global competitiveness. Measurable improvement of renewable and/or industrial excess/waste heat recovery and upgrade solutions, possibly combined with thermal and/or electrical energy storage, in terms of energy efficiency, flexibility of electrical demand, climate and environment protection, reliability and safety, physical and cyber security, and profitability. Scope: This topic aims to satisfy the need for process heat in the more industrial sectors by upgrading excess/waste heat from the process itself, possibly combined with heat recovered in nearby locations or local renewable heat, as a cost-efficient way to improve energy efficiency and reduce the GHG emissions and air pollutants and the use of fossil…

Expected Outcome: Project results are expected to contribute to all of the following expected outcomes: Increased number of building information tools, assessments and/or certificates makes use of digital data exchange platforms; More accurate and reliable EU-aligned life cycle inventories of embodied environmental flows in construction materials and products; Increased number of already existing building standards and certification schemes refer to GWP to support national decarbonisation strategies in line with relevant European legislation (such as Energy Performance of Buildings Directive, Construction Products Regulation and delegated acts, voluntary label for carbon footprint of steel, Delegated Act for carbon removal certification in long-lasting products); Improved data availability and interoperability for whole life carbon assessments across different building lifecycle stages. Scope: The Energy Performance of Buildings Directive (EPBD) recast places an increased emphasis on addressing whole life carbon and the calculation of the global warming potential (GWP) of buildings as part of its holistic approach to enhancing building sustainability. Several projects have focused…

Expected Outcome: Successful proposals will contribute to the Circular Economy Action Plan, the Chemicals Strategy for Sustainability, the Ecodesign for Sustainable Products Regulation, the Chemical Industry Action Plan, and the Clean Industrial Deal. Projects results are expected to contribute to the following expected outcomes: Wider availability of bio-based thermoset materials meeting high technical performance requirements. Improved circularity of thermosets and downstream application(s) against specified market benchmarks taking into account production, use and EoL. Scope: Bio-based thermosets have a proven capability to achieve challenging technical performances for high demanding applications including transport, energy, electronics, among others. However, due to their cross-linking nature, the recycling of thermoset materials (including composites) is more challenging without compromising the technical performances. Thus, eco-designing bio-based thermoset materials to be both circular and high-performing remains a significant challenge in scaling-up towards competitiveness and higher sustainability. Some of the key challenges to address for bio-based thermosets include…

Expected Outcome: Project results are expected to contribute to all of the following expected outcomes: Extended service life and reduced life cycle environmental impacts of existing buildings, contributing to a more sustainable [1] built environment [1] . Easier application and more frequent use of predictive maintenance in existing buildings. Scope: Prolonging the lifespan and improving the performance of existing buildings are among key strategies to decrease new construction rates, which will help reduce the extraction of raw materials, manufacturing of new construction products, generating less waste and thus reducing GHG emissions and contributing to a more sustainable built environment. Recent legal and policy developments such as the recast Energy Performance of Buildings Directive (EPBD) reinforce the importance of preserving and upgrading existing buildings as part of Europe’s climate and circular economy [1] objectives. However, maintenance and repair intervention are often reactive, which can lead to inefficiencies and a lack of environmental sustainability. They can also take time, be costly and disruptive for the building’s users and inhabitants as they can cause…

Expected Impact: Framework Partnership Agreements for non-profit making entities under the LIFE programme aim to strengthen the participation of civil society in the EU policy dialogue, as well as to support implementation and enforcement of Union environmental and climate objectives, including clean energy transition, by the beneficiaries. Objective: LIFE Framework Partnership Agreements with non-profit making entities aim to strengthen the participation of civil society in the EU policy dialogue, as well as to support implementation and enforcement of Union environmental and climate objectives by the beneficiaries. The present call for proposals targets framework partnerships aimed at achieving the objectives of the Circular Economy and Quality of Life, Nature and Biodiversity, Climate Change Mitigation and Adaptation and Clean Energy Transition LIFE sub-programmes. In line with Recital 23 of the LIFE Regulation, the LIFE Framework Partnership Agreements aim at “support[ing] a broad range of NGOs [non-governmental organisations] as well as networks of non-profit-making entities that pursue an aim which is of general Union interest, and that are primarily active in the area of…

Expected Impact: The LIFE operating grants for non-profit making entities aim to strengthen the participation of civil society in the EU policy dialogue, as well as to support implementation and enforcement of Union environmental and climate objectives, including the clean energy transition, by the beneficiaries. Objective: This call for proposals concerns LIFE Specific Operating Grant Agreements (SGA OG) . LIFE Specific Operating Grant Agreements will only be concluded with organisations that have successfully signed a LIFE 2026 Operating Grant Framework Partnership Agreements (FPA OG) . Framework Partnership Agreements (FPAs) under the LIFE Programme are long-term cooperation instruments that serve as umbrella for regular or recurrent grants to non-profit making entities which are involved in the development, implementation and enforcement of EU legislation and policy and which are primarily active in the field of environment or climate action, including energy transition, in line with the objectives of the LIFE Programme. They are a prerequisite for being able to sign annual Specific Operating Grant Agreements (SGAs), but do not create any legitimate expectations or entitlement…

Expected Impact: As indicated in section 1 the Multi-annual Work Programme, it is expected that the financial assistance contributes to the further development and implementation of PCIs and PMIs helping to achieve the broader TEN-E policy objectives and the CEF energy policy objectives of: further integration of an efficient and competitive internal energy market, interoperability of networks across borders and sectors, facilitating decarbonisation of the economy, promoting energy efficiency and ensuring security of supply. In accordance with Recital 5 of the CEF Regulation (EU) 2021/1153 and in line with the Multi-annual Work Programme, this call for proposals aims at financing projects contributing to the goals and objectives of the European Green Deal, as well as the Paris Agreement and the 2030 climate and energy targets and the EU's mid-term and long-term objectives in terms of decarbonisation. Expected Outcome: This topic aims to enable Projects of Common Interest (PCIs) and Projects of Mutual Interest (PMIs) to be implemented within the framework of the deployment of trans-European networks in the energy sector. In particular, the call shall contribute to supporting energy…

Expected Impact: As indicated in section 1 the Multi-annual Work Programme, it is expected that the financial assistance contributes to the further development and implementation of PCIs and PMIs helping to achieve the broader TEN-E policy objectives and the CEF energy policy objectives of: further integration of an efficient and competitive internal energy market, interoperability of networks across borders and sectors, facilitating decarbonisation of the economy, promoting energy efficiency and ensuring security of supply. In accordance with Recital 5 of the CEF Regulation (EU) 2021/1153 and in line with the Multi-annual Work Programme, this call for proposals aims at financing projects contributing to the goals and objectives of the European Green Deal, as well as the Paris Agreement and the 2030 climate and energy targets and the EU's mid-term and long-term objectives in terms of decarbonisation. Expected Outcome: This topic aims to enable Projects of Common Interest (PCIs) and Projects of Mutual Interest (PMIs) to be implemented within the framework of the deployment of trans-European networks in the energy sector. In particular, the call shall contribute to supporting energy…

Expected Impact: The results of the activities should contribute to support common procurement, leading to strengthening the cooperation among Member States and associated countries, as well as to greater interoperability. Furthermore, they should contribute to the replenishment of depleted stockpiles of counter-drone systems, to the increase of existing stockpiles or to establishment of defence industrial readiness pool, as well as to the development and reinforcement of counter-drone solutions as drones are being increasingly perceived as a pressing threat. Objective: This topic aims at actions supporting the common procurement of integrated systems (e.g. VSHORAD or SHORAD) or parts thereof (including sensors, kinetic or non-kinetic effectors - including direct energy weapons -, command and control solutions) to counter unmanned aerial, ground, surface or underwater vehicles, including those controlled remotely or operating autonomously using advanced software and sensors. Scope: Common procurement actions under this topic shall consist of activities related to the cooperation of legal entities in the procurement of integrated counter-drone systems or parts thereof, at any point…

Expected Outcome: Upon completion of the Action, the European HPC and AI ecosystems will be strengthened through an effective network of AI Factories supporting the adoption and use of HPC in the development of trustworthy artificial intelligence (AI) by startups and SMEs, but also by the private and public sector in general, taking into account the specific needs of the local and national ecosystems. The coordinated network will facilitate synergies and assets reutilisation, support, training, staff exchange, knowledge transfer between, AIF+As, as well as prevent duplication of efforts. The Action will ensure the network of AIF+As will be embedded in an enhanced European AI/ HPC ecosystem with strong links to other European HPC, AI, and data initiatives (see above). Moreover, the Action will result in: Contribution to the realisation of the EuroHPC overall and specific objectives. A common governance baseline across AIF+As to ensure the full interoperability and the collective compliance or the network of AIF+As. Seamless user experience across AIF+As, with users receiving a consistent offer of core services. Effective coordination and exchange of best practices and information…

Expected Impact: Projects funded under this call are expected to deliver tangible industrial outputs that demonstrably advance the readiness and affordability of future governmental Ka-band user terminals for IRIS2 and GOVSATCOM services. Expected outputs include, for example: qualified production processes, calibrated sub-assemblies, pilot-run units, validated manufacturing equipment chains or manufacturing cost models. Purely analytical deliverables (studies, design reports) are not sufficient as primary outputs but may complement the above. Where relevant, outputs shall include documented design assumptions, interface parameters or process specifications enabling adaptation to different terminal configurations with limited re-engineering, so as to support uptake in follow-on integration, pilot deployment and scale-up activities. Objective: The aim of this call for proposals is to advance the industrial readiness of European Ka-band user terminal technologies, subsystems and manufacturing processes, with a view to enabling cost-effective production of user terminals for services provided under the Union secure connectivity programme (IRIS²) and GOVSATCOM. The target reference…

Expected Outcome: The targeted outcomes reflect the above challenges and cover a comprehensive Front End module design which: Covers the FR3 range as defined by the relevant Agenda Item of WRC 27 (7 to 15 GHz range) with possible extension up to 24 GHz if required by some regional implementations, with inherent tuning capabilities to accommodate potential regional variations. Mitigates interferences with incumbent FR3 band users and maximises sharing capabilities across the band in line with the European regulatory approach on spectrum sharing. Enables integration of a large number of antenna elements beyond the State of the Art and support massive MIMO implementation with compensation of increased path loss compared to 5G FR1 implementations. Enables at least an order-of-magnitude increase in RF processing compared to 5G FR1 implementations. Enables 5G cell site reuse and minimises deployment complexity on top of 5G sites deployment. Enables low-cost and low energy implementation of the elementary constituent modules, efficient packaging and is mainly based on the integration of microelectronics heterogeneous technologies where European industry has strong expertise and…