Alternatives to Slovenia – Electronic equipment – Digitalna platforma pametno Velenje mobilnost – vzpostavitev sistema za usmerjanje prometa in ANPR v garažnih hišah

We require a rotating machine manufacturer to design, build and install a 5MVA 11kV 50Hz to 6.6kV 60Hz Rotary Frequency Convertor. Both machines shall be synchronous with a mechanical coupling joining the 10-pole motor to the 12-pole generator. There is a requirement to be able to physically rotate the generator stator to enable manipulation of the phase and load angle via racking motor or actuator. The machine should come complete with a starting reactor and contactor connected to the neutral point of the motor, to limit the inrush current on startup to approximately 400A. Control of the machine starting reactor and racking equipment shall be by an external control system, which shall not form part of the machine scope of supply.

Romania – Parts for electrical motors and generators – Achizitie echipamente si lucrari aferente pentru realizarea obiectivul de investitii: “Realizarea unității de producere a energiei termice din biomasă și realizarea rețelei de distribuție a energiei termice din comuna Târlișua, județul Bistrița-Năsăud”

Portsmouth Naval Base require a Portable Skid Mounted Cable Management System (CMS) to power some of their vessels. Each reel shall be capable of supplying a 60Hz electrical supply, up to 690V and 350A.

Romania – Electronic equipment – Componente pentru modernizarea Sistemului LLRF

Spain – Lifting and handling equipment – CTTE1030 Acuerdo Marco para la homologación de proveedores en relación con el servicio de puesta en disposición y alquiler de elementos de elevación para el Grup TERSA (divido en tres (3) lotes)

Lift Modernisation at Europa and Centuria North Buildings Additional information: The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement.

Slovakia – Maps – Elektronický prístup k leteckým navigačným mapám a údajom letísk s celosvetovým pokrytím

Palladium as the delivery partner for the Foreign, Commonwealth and Development Office (FCDO) funded UK Partnering for Accelerate Climate Transitions (UK PACT) programme invites you to submit a quotation for the services detailed in this RFQ. The Philippines is scaling up offshore wind to meet ambitious renewable energy targets, with upcoming auction rounds expected to unlock significant capacity. As the sector advances, attention is shifting toward enabling infrastructure particularly ports, which are critical for construction, staging, installation, and long-term operations. While initial assessments by partners such as ADB and GWEC have focused on public ports, the scale of planned deployment requires expanded port capacity and stronger private sector participation. However, there remains limited clarity on how to structure offshore wind port development to attract investment that is technically viable, commercially sound, and aligned with Department of Energy (DOE) deployment timelines. UK PACT, working with DOE and other agencies, seeks to address this gap by supporting privately led port development and strengthening decision-making, investment readiness, and early market engagement. This intervention will be delivered in two phases. Phase 1 will establish the foundations for private sector participation by drawing on UK experience, developing a Private Offshore Wind Port Development Framework, and identifying and prioritizing suitable port locations particularly in areas such as South Mindoro and Negros Occidental based on technical suitability and readiness. Phase 2 will undertake detailed technical and commercial feasibility assessments of three shortlisted sites, including infrastructure requirements, cost and financial analysis, environmental and regulatory considerations, and market validation Interested suppliers/consortia are encouraged to review the RfQ documentation and submit your proposal in accordance with the instructions above by the Close Date and Time. This RFQ includes the following materials: Schedule 1 - Terms of Reference Schedule 2 - Instructions for submission Schedule 3 - Terms and Conditions Annex I - RFQ Response Form Annex II - Budget and workplan template

Slovenia – Rescue vehicles – NUJNO REŠEVALNO VOZILO TIP C

Remove existing electrical equipment and install new infrastructure for Christmas lighting scheme through Battle High Street. Tenders to be submitted to the Clerk's Office, The Almonry, High Street, Battle, TN33 0EA or via email clerk@battletowncouncil.gov.uk

Unite Procurement UK Limited (part of Unite Holding SE), on behalf of the Ministry of Defence, is seeking suppliers to join the Unite Procurement Platform to support the Supply of Bodyworn Energy Data Logger. The procurement covers the supply of specialist power measurement equipment designed to accurately measure and log power consumption from soldier-carried and operated systems. Objectives • Purchase of equipment capable of measuring the power usage of operator-carried systems • Continued storage and issue of power loggers to projects, thereby informing overall power demand • Measurement and data processing of power information • Nett Warrior connector compatibility Exclusions • Prolonged data analysis • Equipment updates or upgrades • Adaptors required for non-compatible equipment (responsibility of the system under test) • Operating costs for the equipment (a secondary activity for personnel already engaged in the projects under test) 6. Technical Requirements • Must measure power draw from a battery source to a connected portable system • Must be compatible with Nett Warrior connectors • Must export data at Official classification • Must be supplied with appropriate connectors to interface with standard computers (expected: USB) Acceptance Criteria Upon delivery, a brief trial of each item will be conducted, including monitoring of power used by a representative system, followed by upload of data to a standalone laptop. Successful completion of this trial will constitute acceptance and clearance for use in future activities. Acceptance criteria include successful power measurement recording, accurate data export, and successful data transfer to standard computer systems via USB interface. How to Apply Interested suppliers should register their interest by contacting Unite Procurement UK Limited and provide details of their product range, technical specifications, and delivery capabilities. Further information on the onboarding process for the Unite Procurement Platform will be provided upon expression of interest. Unite Procurement UK Limited does not intend to appoint a sole supplier for this requirement. Instead, multiple suppliers may be onboarded to the Unite Procurement Platform to ensure a diverse and competitive supply base, supporting flexibility and choice for the Ministry of Defence and associated organisations. Suppliers are encouraged to express their interest by the stated closing date to ensure early consideration. However, applications to join the Unite Procurement Platform will be welcome at any time beyond the initial deadline. Unite Procurement UK Limited reserves the right to review and onboard new suppliers on a rolling basis to meet evolving requirements and to maintain a dynamic and responsive supplier network. For any enquiries and interest, please email defence.support@unite.eu with the subject title TSS 698 Opportunity.

Unite Procurement UK Limited (part of Unite Holding SE), on behalf of the Ministry of Defence, is seeking suppliers to join the Unite Procurement Platform to support the Supply of Ancillaries including cables, leads, cutters and connectors. The procurement covers the supply, maintenance, calibration, and support services for specialist firing systems and associated equipment. Requirement Overview The user requires an Emergency Disablement capability for general contingency operations and Specialist Users to aid EOD. The means of Firing needs to be a self-contained system, housed within a ruggedised container. It will also include support services. Unite Procurement UK Limited (part of Unite Holding SE), on behalf of the Ministry of Defence, is seeking suppliers to join the Unite Procurement Platform. The Unite Procurement Platform offers a compliant route to market for UK Public Sector organisations to manage low-value, high-volume procurement. How to Apply Interested suppliers should register their interest by contacting Unite Procurement UK Limited and provide details of their product range, modification capabilities, and maintenance services. Further information on the onboarding process for the Unite Procurement Platform will be provided upon expression of interest. Unite Procurement UK Limited does not intend to appoint a sole supplier for this requirement. Instead, multiple suppliers may be onboarded to the Unite Procurement Platform to ensure a diverse and competitive supply base, supporting flexibility and choice for the Ministry of Defence and associated organisations. Suppliers are encouraged to express their interest by the stated closing date to ensure early consideration. However, applications to join the Unite Procurement Platform will be welcome at any time beyond the initial deadline. Unite Procurement UK Limited reserves the right to review and onboard new suppliers on a rolling basis to meet evolving requirements and to maintain a dynamic and responsive supplier network. For any enquiries and interest, please email defence.support@unite.eu with the subject title TSS 681 Opportunity.