Alternatives to AI-based tactical situational awareness using swarms of small robots and drones – organisation of a technological challenge"

Expected Outcome: The expected outcomes of this topic are : A common EU evaluation platform for AI chips and racks, with transparent KPIs, workloads and benchmark reports used for Chips JU selection and procurement decisions. First pilot deployments of European AI compute systems validated for EU sovereign partitions of AI infrastructure. Structured collaboration between buyers and suppliers, supporting deployment, integration and optimisation of European AI compute solutions. Stronger EU demand for European AI chips and racks, helping to create a market for deployment-ready solutions. Increased EU technological sovereignty across the AI compute stack for European datacentres.

Expected Outcome: The targeted outcomes reflect the above challenges and cover a comprehensive Front End module design which: Covers the FR3 range as defined by the relevant Agenda Item of WRC 27 (7 to 15 GHz range) with possible extension up to 24 GHz if required by some regional implementations, with inherent tuning capabilities to accommodate potential regional variations. Mitigates interferences with incumbent FR3 band users and maximises sharing capabilities across the band in line with the European regulatory approach on spectrum sharing. Enables integration of a large number of antenna elements beyond the State of the Art and support massive MIMO implementation with compensation of increased path loss compared to 5G FR1 implementations. Enables at least an order-of-magnitude increase in RF processing compared to 5G FR1 implementations. Enables 5G cell site reuse and minimises deployment complexity on top of 5G sites deployment. Enables low-cost and low energy implementation of the elementary constituent modules, efficient packaging and is mainly based on the integration of microelectronics heterogeneous technologies where European industry has strong expertise and…

Expected Outcome: The topic encompasses actions within the scope of the co-programmed European Partnership on Globally Competitive Space Systems (‘Space Partnership’) in the areas of satellite communication (SatCom), Earth Observation (EO) and New Commercial Space Transportation Solutions and is part of cohesive activities in the domain of digital developments under the grand heading of “digitalisation for commercial space solutions”. Digitalisation is a major enabler for enhancing the value of an End-to-End EO and SatCom system. Under the area of Using Space on Earth related to SatCom and EO, below this topic focusses on the Mid to High TRL level developments of key technologies [1] required to strengthen competitiveness in these domains, contributing to the preparation of EO and SatCom demonstration missions. Projects are expected to contribute to one or several of the following outcomes: Favouring a competitive and sustainable European Space Sector; Enable the European Space Industry to maintain a significant share of the global connectivity market; Advanced Earth observation and SatCom payloads, technologies and processing means (on ground and in space); Advanced EO and SatCom…

Expected Outcome: Proposals are expected to contribute to all the following expected outcomes: Strengthen the competitiveness, sustainability (including biodiversity) and resilience of an innovative clean tech solution by clearly demonstrating the capability to, significantly: increase its circular material use rate, based on a sound and realistic baseline; reduce the levelized cost of energy (LCOE) delivered to end-users - including, where relevant, production, distribution, and storage costs, based on a sound and realistic baseline and considering different geographic scenarios; and contribute to Europe’s industrial leadership and competitiveness, in line with the objectives of Net-Zero Industry Act (NZIA) [1] for the EU manufacturing capacity of net-zero technologies [2] , [3] . Bring this innovative clean tech solution to full technological maturity and close to market-readiness with a view to accelerating its market deployment and/or integration in key industrial sectors in Europe (e.g. manufacturing, energy and transport). Scope: The Clean Industrial Deal aims to secure the EU as an attractive location for manufacturing, including for energy-intensive industries, and to…

Expected Outcome: the project results are expected to contribute to all of the following outcomes: access to cutting-edge infrastructure for researchers and research teams from Euratom and Associated Countries to EU and international state-of-the-art nuclear research infrastructures; enhancing the network developed under the OFFERR project for optimised use of nuclear research infrastructures identified in the EU, thus supporting the implementation of the Euratom programme’s objectives and the establishment of the European Research Area (ERA) in the nuclear safety and radiation protection field; strengthened cross-border collaboration in nuclear safety and radiation protection research in the EU, a significant increase in transnational nuclear research and the fostering of shared expertise and resources; preservation of critical facilities, possibly increasing their number to ensure the long-term availability of key experimental facilities for research into safety, security, safeguards, radioactive waste management and radiation protection (e.g. materials testing research reactors in operation, irradiation infrastructure, hot cells and laboratories, mechanical and thermal…

Expected Outcome: Proposals are expected to contribute to all following points: Significantly reduced EU dependency on imported battery-grade raw materials, specifically emerging technologies and carbon-based electrode materials. Established European value chains for next-generation battery materials, enhancing the EU's technological leadership and strategic autonomy. Scope: Proposals under this topic are expected to address all aspects for one of the following categories: 1. Sustainable Processing and Refining of next generation batteries-grade Material, delivering all of the following: Development and validation of innovative, environmentally friendly refining technologies for producing battery-grade metals and materials suitable for next-generation battery chemistries. This covers raw and advanced electrode materials for the components of sodium-ion batteries or beyond generation 3 [1] lithium-ion batteries Development of processes achieving significant reductions in carbon and ecological footprint, emissions of pollutants, energy usage, and chemical inputs. The selected processes should not negatively impact any of the aspects above or cause significant harm. Validation of…

Expected Outcome: Project results are expected to contribute to all of the following expected outcomes: Reinforcing EU strategic autonomy by reducing non-EU dependencies on critical space EEE components and related technologies across their entire supply chain; Providing unrestricted access to critical space EEE components and related technologies relevant for EU space missions (Galileo, EGNOS, Copernicus, IRIS 2 and EU pilot missions on In-Orbit Space Operations and Quantum Gravimetry); Developing or regaining capacity to operate independently in space by developing resilient space EEE components and related technologies supply chains, relying on EU supply chains and/or trustable and reliable supply chains not affected by non-EU export restrictions; Enhancing competitiveness by developing products and capabilities reaching equivalent or superior performance level than those from outside the EU and compete at worldwide level. Scope: Unrestricted access to state-of-art space EEE components and related technologies is a pre-requisite for the EU space industry responding to EU space missions. However, especially for some families of components, the available solutions in EU do not…

Expected Outcome: Project results are expected to contribute to all of the following expected outcomes: Member States and Associated Countries contribute to the implementation of area-based management tools, such as protection targets and adaptive management approaches for deep-sea regions under the Treaty on Biodiversity Beyond National Jurisdiction (BBNJ) and the Kunming-Montreal Global Biodiversity Framework (GBF), for Regional fisheries Management Organisations (RFMOs) and for transitions areas with the EU exclusive economic zone notably by identifying Ecologically and biologically significant marine areas (EBSAS), and informing the next Global Assessment of Biodiversity and Ecosystem Services; Public Authorities prioritise deep sea areas for inclusion in their 30% protection target while enhancing maritime spatial planning achieved through science-based information, habitat mapping and ecosystem-based approach, aligned with the EU strategies for biodiversity and climate adaptation by 2030. Scope: The deep sea represents 90% of the Ocean volume and remains the least explored biome of the planet. Nevertheless, we know that the deep sea forms an extensive and complex ensemble of…

Expected Outcome: Project results are expected to contribute to all of the following expected outcomes: impacts of continuous and impulsive underwater noise levels on marine organisms and ecosystems, and the related ecosystem services they provide, including cumulative impacts with other pressures, are well understood, taking into account regional differences; environmental authorities have access to advanced methods, tools and indicators enabling them to comprehensively monitor and assess the impacts of underwater noise pollution on marine species and ecosystems and to devise strategies for protecting the ecosystems services they provide. Scope: Proposals should: develop new, or improve upon existing, scientific methods and tools for comprehensively monitoring the impacts of anthropogenic underwater noise pollution on marine ecosystems and species populations at different trophic levels and taking into account regional differences; develop new, or improve upon existing, indicators for the assessment of the effects of noise exposure as well as their cumulative effects on marine organisms and ecosystems, and the services they provide, in line with methods (including threshold…

Scope: Proposals innovations should address one or more of the several domains : WBG substrates to reduce EU dependency on material and provide more sustainable, industrially compatible solutions. WBG platform for cost effectiveness, available in 300mm for GaN and/or SiC to improve yield and power density and close gaps in the value chain. A toolbox (e.g. wafer cut, smart stacking, thin layer transfer, epitaxy, UWBG materials) for further innovation schemes. Next generation or optimised new power semiconductor devices fitting their application. Adding intelligence to power semiconductor devices on control and/or sensor side. Facilitate the propagation of EU Packaging/Integration excellence along the entire value chain e.g. pre-packages or power semiconductor device packaging solutions to enable power device/system integration and strengthen Europe’s competitiveness in advanced packaging. Explore the use of heterogeneous and functional integration for improved performance, reliability, robustness and cost competitiveness. Rising operative voltage, frequency, current and thermal features that are common challenge on power electronics across the different application sectors. Provide…

Expected Outcome: this topic is a continuation for the co-funded European partnership for research in nuclear materials (CONNECT-NM) and constitutes the EU’s contribution to the 2026-2027 budgetary period. This action aims to provide additional funding to the co-funded European partnership on nuclear materials that brings together European entities that have a national mandate for research in materials science and deal with nuclear materials. It aims to pool their resources in order to achieve critical mass and improve safety, as well as efficiency and effectiveness, when implementing materials solutions in the nuclear domain across Europe. The scope of the partnership on nuclear materials covers the research interests of all Member States and Associated Countries dealing with nuclear materials research. It is not limited to countries that generate nuclear power. The grant to the partnership will contribute to the expected outcomes specified in topic HORIZON-EURATOM-2023-NRT-01-04. The consortium that won the grant under topic HORIZON-EURATOM-2023-NRT-01-04 is uniquely placed to submit a proposal to continue the envisioned partnership. The consortium for the present topic may…

Expected Outcome: Battery recycling is of strategic importance for both Europe and India, not only to keep raw materials in the respective territories but also to reduce the environmental impact of the recycling process. R&I in this area has been identified as a priority by the EU-India Trade and Technology Council’s Working Group on Green and Clean Energy Technology to reinforce bilateral cooperation. Project results are expected to contribute to all of the following expected outcomes: Battery recyclers based in the EU and India benefit from of the improved sustainability, safety, and affordability of innovative recycling processes. Stakeholders on battery recycling based in the EU and India benefit from each other’s experience on recycling logistics, including the informal processes and supply chain constraints. The cooperation between EU and India key researchers, institutions and industries which are active in battery recycling is supported and strengthened. Scope: Projects are expected to build a jointly operated recycling pilot line on Indian soil demonstrating innovative recycling processes for lithium-ion batteries going beyond the current state of the art in terms of…