Czechia – Construction work for highways, roads – II/117 Strašice - Mirošov, 4. etapa

Czechia – Substation construction work – PRE – T402 nový (P.0656), stavebně-montážní práce

Czechia – Construction work – Prodej pozemku p.č.st. 1/1 a p.č. 6973 v k.ú. Zlín za účelem realizace developerského projektu s výhradou budoucího nabytí nebytových prostor

Romania – Roadworks – Servicii de proiectare, asistență tehnică din partea proiectantului și lucrări de execuție aferente obiectivului de investiție: „Modernizare infrastructură rutieră de drum județean 205L pe sectoarele: int. DJ 205D (Grumaz) - Vrâncioaia, Spinești – Păulești - Tulnici - int. DN2D”

Croatia – Construction work for pharmaceutical plant – Dogradnja proizvodno-skladišnog farmaceutskog objekta u Dugopolju

We are seeking applications from suitably qualified and accredited Independent Connection Providers (ICPs), Self-Lay Providers (SLPs), and multi-utility contractors to deliver contestable utility connection works across several active construction sites in London. Please note that the estimated contract value shown is based on a per site average. The works encompass the design, procurement, excavation, installation, testing, and commissioning of primary utility infrastructure for: - Power (HV/LV distribution and substation connections) - Water (Main tapping, metering, chlorination, and adoption prep) - Telecommunications (Ducting, chambers, and fibre integration) SCOPE OF WORKS BY UTILITY a) Power Infrastructure: - Installation of High Voltage (HV) and Low Voltage (LV) cables. - Substation base construction, transformer positioning, and jointing. - Delivery of contestable works under UK Power Networks (UKPN) adoption standards. b) Water Infrastructure: - Main connections, boundary box installations, and site distribution pipework. - Pressure testing, chlorination, and water sampling under Thames Water / Affinity Water standards. c) Telecoms & Communications: - Installation of Openreach / Virgin Media / Altnets compliant ducting and footway chambers. - Cable pulling, lead-in installation, and box terminations. LONDON OPERATIONAL CONSTRAINTS & SITE CONDITIONS Contracts will take place in high-density urban environments. Bidders must demonstrate proven capability in managing: - NRSWA Compliance & Highway Authorities: Securing Section 50/171 licenses, managing Traffic Management (TM) schemes, and adhering to London Borough / TfL permit systems. - Sub-surface Utilities: Operating in congested underground service environments utilizing PAS 128 (Type B/A) utility mapping and GPR scanning prior to excavation. - Low Emission Requirements: Compliance with London's NRMM (Non-Road Mobile Machinery) emissions standards and FORS (Fleet Operator Recognition Scheme) Silver/Gold for site deliveries. CONTRACTUAL STRUCTURE We reserve the right to award this scope as a single multi-utility package or split the requirements into trade-specific lots (Water, Power, Telecoms) depending on response quality.

WC1857725 - AKI- CIDP Tool Ref: 126596 (AK)-Akrotiri Mole Steel Jetty - Refurbish Entire Structure * Please provide a detailed description of the notice you are adding: Demolish existing steel jetty, complete with concrete beam along with the structures/ buildings south of the proposed new quay wall. Reconstruct new jetty using both precast units and in-situ concrete, complete with foundation, relief prism, drainage system, including oil water separator and equipped with fenders, bollards, handrails, ladders and M&E services (power & water supply) related to the Mole jetting as well as lighting installation for both new jetty and other Mole area and various reinstatement works of the affected surfaces (concrete & asphalt). The Provisional Key Tender dates for the project are as follows: - Expression of interest: 20/07/2026 - Expression of interest return: 27/07/2026 - Invitation to Tender: 06/08/2026 - Tender Return Date: 16/10/2026 - Contract award: 20/12/2027 - Commencement of work: 07/01/2027 - Completion of work: 30/08/2027 Note: Due to Environmental Issues Works within water are to be completed by 30 April 2027. The completion of the works will be on 30/08/2028, considering the turtle nesting period falls between April and November when no works are allowed underwater. The currency of this project is Euro (€). The location of this project is Cyprus (British Forces, RAF Akrotiri). Additional information: Work commencement and completion dates will be subject to MOD DIO's agreement, as they will be dictated by the DIO Environmental Advisor to avoid the environmental restricted periods (e.g. pre-determined breeding periods, turtle nesting period, etc.). This will lead to phasing of the works. ATTACHMENTS: 1. EOI (expression of interest) form 2. PQQ (pre-qualification questionnaire) form Both forms must be completed and returned by the interested tenderers

UK registered organisations can apply for a share of up to £150 million. The funding will be to develop, deploy and operate innovative clean maritime solutions for three years in a real world environment. This funding is from the Department for Transport.

UK registered organisations can apply for a share of up to £150 million. The funding will be to develop, deploy and operate innovative clean maritime solutions for three years in a real world environment. This funding is from the Department for Transport.

Expected Outcome: Proposals submitted to this call are expected to address several of the following elements: • Scaling of wafer-level photonic processes for key materials (e.g. SiN, InP, GaAs),including process integration, yield optimisation, and manufacturability at highvolumes. • Development of packaging and test solutions that are scalable, automated, andcompatible with co-packaged optics and advanced photonic-electronic integration. • Integration of heterogeneous materials and components, such as on-chip lasers,modulators, and detectors, using advanced packaging and assembly approaches. • Design-process-equipment co-optimisation, enabling repeatable, cost-effectiveproduction of complex photonic circuits and systems, including use of PDKs andvalidated building blocks. • Demonstration of system-level functionality through application-relevant use casesin strategic sectors (e.g. AI, sensing, telecommunication, mobility, health, defence),with quantified performance metrics and clear market relevance.

Expected Outcome: The proposals under this topic should address the design/specification and implementation/testing of the key microelectronics building blocks of an FR3 FEM paving the way towards their future integration into a complete integrated FEM system. • Progresses the State of the art to optimise the cost-performance trade off to serve the target ITU IMT 2030 specifications, notably for what concerns maximum data rate, user data rate, spectral efficiency, whilst enabling 50% mobile transmission system energy consumption; • Allows operational implementation of spectrum sharing with other spectrum users within the selected FR3 sub-band; • Enables large arrays integration for increased path loss compensation at FR3 frequencies with very compact, low power, high efficiency FEM integration; • Enables high bandwidth for carrier aggregation with broadband RF transceivers; • Enables SBFD (Sub-Band non overlapping Full-Duplex) for UL coverage extension (Rel.-19 5G-Advanced in 3GPP) with appropriate interference cancellation techniques; • Enables ISAC (Integrated Sensing and Communications) supporting monostatic as well as bistatic radar functionality, and addressing interference…