Romania – Roadworks – Servicii de proiectare, asistență tehnică din partea proiectantului și lucrări de execuție aferente obiectivului de investiție: „Modernizare infrastructură rutieră de drum județean 205L pe sectoarele: int. DJ 205D (Grumaz) - Vrâncioaia, Spinești – Păulești - Tulnici - int. DN2D”

Croatia – Construction work for pharmaceutical plant – Dogradnja proizvodno-skladišnog farmaceutskog objekta u Dugopolju

We are seeking applications from suitably qualified and accredited Independent Connection Providers (ICPs), Self-Lay Providers (SLPs), and multi-utility contractors to deliver contestable utility connection works across several active construction sites in London. Please note that the estimated contract value shown is based on a per site average. The works encompass the design, procurement, excavation, installation, testing, and commissioning of primary utility infrastructure for: - Power (HV/LV distribution and substation connections) - Water (Main tapping, metering, chlorination, and adoption prep) - Telecommunications (Ducting, chambers, and fibre integration) SCOPE OF WORKS BY UTILITY a) Power Infrastructure: - Installation of High Voltage (HV) and Low Voltage (LV) cables. - Substation base construction, transformer positioning, and jointing. - Delivery of contestable works under UK Power Networks (UKPN) adoption standards. b) Water Infrastructure: - Main connections, boundary box installations, and site distribution pipework. - Pressure testing, chlorination, and water sampling under Thames Water / Affinity Water standards. c) Telecoms & Communications: - Installation of Openreach / Virgin Media / Altnets compliant ducting and footway chambers. - Cable pulling, lead-in installation, and box terminations. LONDON OPERATIONAL CONSTRAINTS & SITE CONDITIONS Contracts will take place in high-density urban environments. Bidders must demonstrate proven capability in managing: - NRSWA Compliance & Highway Authorities: Securing Section 50/171 licenses, managing Traffic Management (TM) schemes, and adhering to London Borough / TfL permit systems. - Sub-surface Utilities: Operating in congested underground service environments utilizing PAS 128 (Type B/A) utility mapping and GPR scanning prior to excavation. - Low Emission Requirements: Compliance with London's NRMM (Non-Road Mobile Machinery) emissions standards and FORS (Fleet Operator Recognition Scheme) Silver/Gold for site deliveries. CONTRACTUAL STRUCTURE We reserve the right to award this scope as a single multi-utility package or split the requirements into trade-specific lots (Water, Power, Telecoms) depending on response quality.

Czechia – Construction work for highways, roads – II/117 Strašice - Mirošov, 4. etapa

WC1857725 - AKI- CIDP Tool Ref: 126596 (AK)-Akrotiri Mole Steel Jetty - Refurbish Entire Structure * Please provide a detailed description of the notice you are adding: Demolish existing steel jetty, complete with concrete beam along with the structures/ buildings south of the proposed new quay wall. Reconstruct new jetty using both precast units and in-situ concrete, complete with foundation, relief prism, drainage system, including oil water separator and equipped with fenders, bollards, handrails, ladders and M&E services (power & water supply) related to the Mole jetting as well as lighting installation for both new jetty and other Mole area and various reinstatement works of the affected surfaces (concrete & asphalt). The Provisional Key Tender dates for the project are as follows: - Expression of interest: 20/07/2026 - Expression of interest return: 27/07/2026 - Invitation to Tender: 06/08/2026 - Tender Return Date: 16/10/2026 - Contract award: 20/12/2027 - Commencement of work: 07/01/2027 - Completion of work: 30/08/2027 Note: Due to Environmental Issues Works within water are to be completed by 30 April 2027. The completion of the works will be on 30/08/2028, considering the turtle nesting period falls between April and November when no works are allowed underwater. The currency of this project is Euro (€). The location of this project is Cyprus (British Forces, RAF Akrotiri). Additional information: Work commencement and completion dates will be subject to MOD DIO's agreement, as they will be dictated by the DIO Environmental Advisor to avoid the environmental restricted periods (e.g. pre-determined breeding periods, turtle nesting period, etc.). This will lead to phasing of the works. ATTACHMENTS: 1. EOI (expression of interest) form 2. PQQ (pre-qualification questionnaire) form Both forms must be completed and returned by the interested tenderers

Arc Property Services Partnership Ltd (the Client), is seeking to appoint a single contractor to deliver painting and decorating works under an NEC4 Term Service Short Contract. The Contract will also be made available to VIA East Midlands Ltd (Participating Organisation). The scope of works will include the provision of painting and decorating services across a varied portfolio of operational and commercial properties across the operational estate that manages on behalf of Nottinghamshire County Council (NCC) and other customers. Works will be undertaken at sites located across Nottinghamshire (main area), Derbyshire, South Yorkshire and Leicestershire. The contract is expected to commence in February 2027 for an initial period of two years, with the option to extend for up to two additional periods of two years each, up to a maximum potential end date in 2033 (2+2+2 = 6 years). The estimated total value of the contract over its full potential duration is approximately £780,000 (inclusive of VAT). This only an estimate and the award will be based on the outcome of the tender process. This procurement will be carried out as a two-stage process comprising a Pre-Qualification Questionnaire (PQQ) stage followed by an Invitation to Tender (ITT). One supplier will be appointed. Suppliers will be invited to submit a Stage 1 response demonstrating their suitability, capability, capacity, relevant experience, technical competence, accreditations, financial standing and compliance with the Authority's minimum requirements. Responses will be evaluated against the published selection criteria. Following evaluation, the Authority intends to shortlist the highest-scoring suppliers who meet the minimum requirements and invite them to participate in Stage 2. The Authority reserves the right to limit the number of suppliers progressing to the next stage in accordance with the criteria set out in the procurement documents. Stage 2 - Invitation to Submit Tender Shortlisted suppliers will be invited to submit a detailed tender for the painting and decorating works and associated works across the Client's estate. Tenders will be evaluated based on the published award criteria using the Most Advantageous Tender (MAT) approach (price to quality ratio: price30%/quality70%). The successful supplier will be expected to work collaboratively with the Client, contribute to social value outcomes, support carbon reduction objectives and demonstrate high standards of health and safety, compliance, and service delivery across all commissioned works. Additional information: The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement. Bidders should be made aware that as the Client's main customer is NCC, there is a risk of increase or decrease in the number of sites managed and the types of properties serviced, due to the proposal of local government reorganisation. The Authority reserves the right to amend the procurement timetable, request clarifications, and conduct presentations, interviews or site visits where considered necessary and proportionate.

Romania – Software development services – SERVICII DE DEZVOLTARE A SOLUȚIILOR DIGITALE, LICENȚE AFERENTE SOLUȚIILOR DIGITALE DE TIP FRONT OFFICE ȘI BACK OFFICE, INCLUSIV SERVICII DE INSTRUIRE ÎN CADRUL PROIECTULUI Creșterea gradului de digitalizare în beneficiul cetățenilor, în cadrul Comunei Teliu, județul Brașov

UK registered organisations can apply for a share of up to £150 million. The funding will be to develop, deploy and operate innovative clean maritime solutions for three years in a real world environment. This funding is from the Department for Transport.

UK registered organisations can apply for a share of up to £150 million. The funding will be to develop, deploy and operate innovative clean maritime solutions for three years in a real world environment. This funding is from the Department for Transport.

Expected Outcome: Proposals submitted to this call are expected to address several of the following elements: • Scaling of wafer-level photonic processes for key materials (e.g. SiN, InP, GaAs),including process integration, yield optimisation, and manufacturability at highvolumes. • Development of packaging and test solutions that are scalable, automated, andcompatible with co-packaged optics and advanced photonic-electronic integration. • Integration of heterogeneous materials and components, such as on-chip lasers,modulators, and detectors, using advanced packaging and assembly approaches. • Design-process-equipment co-optimisation, enabling repeatable, cost-effectiveproduction of complex photonic circuits and systems, including use of PDKs andvalidated building blocks. • Demonstration of system-level functionality through application-relevant use casesin strategic sectors (e.g. AI, sensing, telecommunication, mobility, health, defence),with quantified performance metrics and clear market relevance.

Expected Outcome: The proposals under this topic should address the design/specification and implementation/testing of the key microelectronics building blocks of an FR3 FEM paving the way towards their future integration into a complete integrated FEM system. • Progresses the State of the art to optimise the cost-performance trade off to serve the target ITU IMT 2030 specifications, notably for what concerns maximum data rate, user data rate, spectral efficiency, whilst enabling 50% mobile transmission system energy consumption; • Allows operational implementation of spectrum sharing with other spectrum users within the selected FR3 sub-band; • Enables large arrays integration for increased path loss compensation at FR3 frequencies with very compact, low power, high efficiency FEM integration; • Enables high bandwidth for carrier aggregation with broadband RF transceivers; • Enables SBFD (Sub-Band non overlapping Full-Duplex) for UL coverage extension (Rel.-19 5G-Advanced in 3GPP) with appropriate interference cancellation techniques; • Enables ISAC (Integrated Sensing and Communications) supporting monostatic as well as bistatic radar functionality, and addressing interference…