Alternatives to France – Electricity – Fourniture et acheminement d’électricité et services associés dans le cadre d’un groupement entre le Syndicat Intercommunal Loos Haubourdin (SILH) pour le centre aquatique Neptunia et la Ville de Loos (59120) pour le Château de La Pierrette situés à Haubourdin (59320)

France – Natural gas – Marché de fourniture et d'acheminement de gaz naturel

France – Petroleum, coal and oil products – Fourniture de produits pétroliers raffinés

UK registered organisations can apply for a share of up to £150 million. The funding will be to develop, deploy and operate innovative clean maritime solutions for three years in a real world environment. This funding is from the Department for Transport.

Expected Outcome: The proposals under this topic should address the design/specification and implementation/testing of the key microelectronics building blocks of an FR3 FEM paving the way towards their future integration into a complete integrated FEM system. • Progresses the State of the art to optimise the cost-performance trade off to serve the target ITU IMT 2030 specifications, notably for what concerns maximum data rate, user data rate, spectral efficiency, whilst enabling 50% mobile transmission system energy consumption; • Allows operational implementation of spectrum sharing with other spectrum users within the selected FR3 sub-band; • Enables large arrays integration for increased path loss compensation at FR3 frequencies with very compact, low power, high efficiency FEM integration; • Enables high bandwidth for carrier aggregation with broadband RF transceivers; • Enables SBFD (Sub-Band non overlapping Full-Duplex) for UL coverage extension (Rel.-19 5G-Advanced in 3GPP) with appropriate interference cancellation techniques; • Enables ISAC (Integrated Sensing and Communications) supporting monostatic as well as bistatic radar functionality, and addressing interference…

Expected Outcome: Project results are expected to contribute to all of the following expected outcomes: Measurable reduction in the costs of deep renovation compared to current best practices; Measurable increase in resource and energy efficiency compared to current best practices; Measurable reduction in the number of days when occupants are disturbed due to renovation works; Measurable reduction of dust, noise, waste and pollutant and greenhouse emissions on the construction site compared to current best practices. Scope: Meeting Europe’s ambition for the renovation of the housing stock requires innovative approaches that improve buildings’ energy performance and occupants’ satisfaction, at a reduced cost while speeding up the renovation process and minimising impact on the construction site and disturbance for occupants. Renovation approaches should cover the whole workflow from design, off-site manufacturing and on-site installation to strategies for maintenance, operation and end of life. Proposals are expected to address all of the following: Demonstrate cost-effective approaches (comprising design, planning and construction processes and techniques) for deep renovation to…

UK registered organisations can apply for a share of up to £150 million. The funding will be to develop, deploy and operate innovative clean maritime solutions for three years in a real world environment. This funding is from the Department for Transport.

UK registered organisations can apply for a share of up to £150 million. The funding will be to develop, deploy and operate innovative clean maritime solutions for three years in a real world environment. This funding is from the Department for Transport.

Expected Outcome: Project results are expected to contribute to all of the following expected outcomes: Based on the results of the project, at least one industrial sector with a significant heating demand in the EU and Associated Countries develops pathways and business models to measurably increase the recovery and upgrade of locally available heat for covering process needs and significantly or totally phasing out of fossil fuel use, while preserving or enhancing its global competitiveness. Measurable improvement of renewable and/or industrial excess/waste heat recovery and upgrade solutions, possibly combined with thermal and/or electrical energy storage, in terms of energy efficiency, flexibility of electrical demand, climate and environment protection, reliability and safety, physical and cyber security, and profitability. Scope: This topic aims to satisfy the need for process heat in the more industrial sectors by upgrading excess/waste heat from the process itself, possibly combined with heat recovered in nearby locations or local renewable heat, as a cost-efficient way to improve energy efficiency and reduce the GHG emissions and air pollutants and the use of fossil…

The opportunity for the Federal Aviation Administration (FAA) Center of Excellence for Alternative Jet Fuel and Environment (AJFE) was awarded in 2013 to the ASCENT cooperative aviation research organization. ASCENT is a coalition of 16 leading US research universities committed to improving the understanding of aviation noise and emissions and the modeling of aviation systems. ASCENT is co-led by Washington State University and the Massachusetts Institute of Technology (https://ascent.aero/). Any new grant opportunities under AJFE are open and available only to the university members of ASCENT.”

Expected Outcome: Project results are expected to contribute to all of the following expected outcomes: Increased number of building information tools, assessments and/or certificates makes use of digital data exchange platforms; More accurate and reliable EU-aligned life cycle inventories of embodied environmental flows in construction materials and products; Increased number of already existing building standards and certification schemes refer to GWP to support national decarbonisation strategies in line with relevant European legislation (such as Energy Performance of Buildings Directive, Construction Products Regulation and delegated acts, voluntary label for carbon footprint of steel, Delegated Act for carbon removal certification in long-lasting products); Improved data availability and interoperability for whole life carbon assessments across different building lifecycle stages. Scope: The Energy Performance of Buildings Directive (EPBD) recast places an increased emphasis on addressing whole life carbon and the calculation of the global warming potential (GWP) of buildings as part of its holistic approach to enhancing building sustainability. Several projects have focused…

Expected Outcome: Successful proposals will contribute to the Circular Economy Action Plan, the Chemicals Strategy for Sustainability, the Ecodesign for Sustainable Products Regulation, the Chemical Industry Action Plan, and the Clean Industrial Deal. Projects results are expected to contribute to the following expected outcomes: Wider availability of bio-based thermoset materials meeting high technical performance requirements. Improved circularity of thermosets and downstream application(s) against specified market benchmarks taking into account production, use and EoL. Scope: Bio-based thermosets have a proven capability to achieve challenging technical performances for high demanding applications including transport, energy, electronics, among others. However, due to their cross-linking nature, the recycling of thermoset materials (including composites) is more challenging without compromising the technical performances. Thus, eco-designing bio-based thermoset materials to be both circular and high-performing remains a significant challenge in scaling-up towards competitiveness and higher sustainability. Some of the key challenges to address for bio-based thermosets include…

Expected Outcome: Project results are expected to contribute to all of the following expected outcomes: Measurable increase in the number of tools and solutions at district or city level that are supporting the application of circular economy models by public and private stakeholders active in the construction sector; Measurable reduction of material use and an increase of reuse and recycling in the construction sector as a result of the introduction of new and replicable business models; Measurable reduction in the energy and other resources use and the whole life-cycle GHG emissions of buildings [1] and building stock (residential and non-residential) by introducing circular economy activities at building, district and city level. Scope: Applying circularity principles in the construction sector at building, district and city level can reduce the whole life-cycle GHG emissions and support more efficient resource use of the building stock, and help deliver climate-neutral, smart and circular cities, and a more sustainable built environment. To achieve this, there is a need for tools, solutions and associated business models with market potential that facilitate the adoption of…