M6 Lune Gorge - Pier Bracing and Access Systems Installation

West Herts College are completing their site wide masterplan at the Barnfield Campus and are looking to Deliver the final Phase of the masterplan. Phase 3 will deliver a new court sports hall, changing facilities, social and gym spaces and teaching spaces on both the ground and first floor including associated external works and drainage. Phase 3 - The proposal is for a two-storey Concrete/ Steel frame. The facility will deliver a four-court sports hall and associated changing rooms. Teaching areas on both the ground and first floor with social spaces. There will be two dedicated entrances for either the teaching or sports. The building will be connected to the existing M&E infrastructure where required. Works are to also include a feature fencing linking Phase 2 and 3 and associated external works/ drainage The approximate GIFA is is 2,587m². To access this competition: Registered: Login to https://suppliers.multiquote.com and view the opportunity CA18082. Not registered: Visit https://suppliers.multiquote.com then register and quote CA18082 as the reason for registration. Any queries please contact MultiQuote on 020 3920 8054.

The project involves the replacement of two chiller units located within the external plant compound at the Central Annexe Building, together with the installation of a new buffer vessel to support the upgraded cooling system. Key supporting works include: •Provision and installation of a temporary chiller unit to maintain building operations and cooling continuity during the replacement works. •Coordination with the separate chiller supplier, including delivery management and crane operations for installation. •Temporary modifications to the existing steel plant enclosure to facilitate removal and installation of plant. •Permanent structural modifications to the steel plant supports to accommodate and support the new chillers and buffer vessel. •Removal and upgrade of the associated electrical infrastructure. •Reinstatement, recertification, and making good of all affected fire stopping and compartmentation measures. Additional information: The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement.

Colchester Borough Homes (the Authority) on behalf of Colchester City Council (the Council) wishes to commission a contractor to undertake the following: The works briefly comprise the re-covering of felt flat roof coverings to two storey flat blocks at various locations within the Colchester District. The works will require stripping up and replacement of roof decks to some locations and overlaying to others. To all locations the installation of a designed, tapered insulation system will be required. Where roof deck replacement is required, full temporary roof protection (tin hat) will be required. The blocks have existing photovoltaic panels installed, these are to be removed and reinstated by the Contractor or by specialist named subcontractors whose works are to be managed by the principal contractor. This description is non exhaustive and a summary only; full details are contained within the accompanying documents. The form of contract to be used for this tender exercise is the JCT Intermediate Building Contract 2016 Edition (IC2016). Additional information: The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement. The contract period provided is a guide, although the works shall take no longer than 22 weeks. Provisional dates stated as w/c 28th September 2026 to w/e 12 March 2027 (allowing a 2-week break for the Festive Period). Bidders are to confirm their timeline in 3.3 of the Bidder Response Document.

There is a requirement for the replacement of the existing Portacabins with new modular office complex. RIBA4 consultation and delivery of RIBA 5 onwards. Including all Civil, landscaping and MEP works required. This includes small refurbishment works to an existing office. Bidders must have SC Clearance and Cyber Essentials Plus to proceed to Tender stage.

Various minor works requirements for LEAD Academy. The works have been divided into 10 separate lots. Includes Lots: Lot 1: Lot 10 - Windows & Doors Lot 2: Lot 9 - Suspended Ceiling Works Lot 3: Lot 8 - Plumbing Works Lot 4: Lot 7 - Roofing Works Lot 5: Lot 6 - Painting Works Lot 6: Lot 5 - Joinery Works Lot 7: Lot 3 - Fencing Works Lot 8: Lot 2 - Electrical Works Lot 9: Lot 1 - Drainage Works Lot 10: Lot 4 - Flooring Works To access this competition: Registered: Login to https://suppliers.multiquote.com and view the opportunity CA18170. Not registered: Visit https://suppliers.multiquote.com then register and quote CA18170 as the reason for registration. Any queries please contact MultiQuote on 020 3920 8054.

The project comprises the replacement of 3nr. chiller units on the Diamond Building Roof. Specifically: •System 1: Comprises 2nr. chiller units. Air handling unit cooling coil systems. •System 2: Comprises 1nr. chiller unit. Floor plate chilled beam systems. Supporting works include: •Coordinating purchase of and managing delivery of chiller units, including managing cranage. •Removal and upgrade of the associated electrical infrastructure. •Removal of existing low-voltage cabling. •Modifications and upgrades to existing electrical switchgear located on the ground floor and basement areas. •Removal and reinstatement of affected internal finishes. •Making good, recertification, and reinstatement of fire stopping measures and compartmentation lines impacted by the works. Additional information: The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement.

Expected Outcome: the proposals under this call are expected to address one or more of the following subjects : • Enhanced personalized monitoring, care and treatments, focusing on the development of highly customized healthcare solutions, including the required research and diagnostic tools, tailored to individual needs, covering various scenarios such as chronic disease management, physiotherapy, precision diagnosis, personalized medicine/treatment, pre- and postoperative care, and daily assistance in homes and common spaces. It also targets effective management of chronic diseases and elderly care through personalized monitoring and interventions facilitated by advanced sensor technologies and edge-to-cloud solutions. This includes the development and integration of solutions for Hospitalization at Home, enabling patients to receive complex, remotely supervised care using intelligent medical devices capable of sensing, analysing, and transmitting real-time data. This requires a continuum, from in-hospital diagnostics to robust, long-term patient support at home via AI-driven care pathways and hospitalization at home. • Prevention and treatment of diseases, allowing the improved…

Scope: Proposals innovations should address one or more of the several domains : WBG substrates to reduce EU dependency on material and provide more sustainable, industrially compatible solutions. WBG platform for cost effectiveness, available in 300mm for GaN and/or SiC to improve yield and power density and close gaps in the value chain. A toolbox (e.g. wafer cut, smart stacking, thin layer transfer, epitaxy, UWBG materials) for further innovation schemes. Next generation or optimised new power semiconductor devices fitting their application. Adding intelligence to power semiconductor devices on control and/or sensor side. Facilitate the propagation of EU Packaging/Integration excellence along the entire value chain e.g. pre-packages or power semiconductor device packaging solutions to enable power device/system integration and strengthen Europe’s competitiveness in advanced packaging. Explore the use of heterogeneous and functional integration for improved performance, reliability, robustness and cost competitiveness. Rising operative voltage, frequency, current and thermal features that are common challenge on power electronics across the different application sectors. Provide…

UK registered organisations can apply for a share of up to £121 million across the three strands of this competition for innovative clean maritime technologies. This funding is from the Department for Transport (DfT).

Expected Outcome: Proposals submitted to this call are expected to address several of the following elements: • Scaling of wafer-level photonic processes for key materials (e.g. SiN, InP, GaAs),including process integration, yield optimisation, and manufacturability at highvolumes. • Development of packaging and test solutions that are scalable, automated, andcompatible with co-packaged optics and advanced photonic-electronic integration. • Integration of heterogeneous materials and components, such as on-chip lasers,modulators, and detectors, using advanced packaging and assembly approaches. • Design-process-equipment co-optimisation, enabling repeatable, cost-effectiveproduction of complex photonic circuits and systems, including use of PDKs andvalidated building blocks. • Demonstration of system-level functionality through application-relevant use casesin strategic sectors (e.g. AI, sensing, telecommunication, mobility, health, defence),with quantified performance metrics and clear market relevance.