Spain – Electricity – Suministro de energía eléctrica para los edificios e instalaciones del Ayuntamiento de la Villa de Breña Alta

UK registered organisations can apply for a share of up to £150 million. The funding will be to develop, deploy and operate innovative clean maritime solutions for three years in a real world environment. This funding is from the Department for Transport.

Expected Outcome: The proposals under this topic should address the design/specification and implementation/testing of the key microelectronics building blocks of an FR3 FEM paving the way towards their future integration into a complete integrated FEM system. • Progresses the State of the art to optimise the cost-performance trade off to serve the target ITU IMT 2030 specifications, notably for what concerns maximum data rate, user data rate, spectral efficiency, whilst enabling 50% mobile transmission system energy consumption; • Allows operational implementation of spectrum sharing with other spectrum users within the selected FR3 sub-band; • Enables large arrays integration for increased path loss compensation at FR3 frequencies with very compact, low power, high efficiency FEM integration; • Enables high bandwidth for carrier aggregation with broadband RF transceivers; • Enables SBFD (Sub-Band non overlapping Full-Duplex) for UL coverage extension (Rel.-19 5G-Advanced in 3GPP) with appropriate interference cancellation techniques; • Enables ISAC (Integrated Sensing and Communications) supporting monostatic as well as bistatic radar functionality, and addressing interference…

Modification 000003: The purpose of this modification is to revise NOFO Part 1. Section I.A.1 is revised to correct the Topic Area 1b cost share to 20% and Section IV.C.2 is revised to delete the Environmental Considerations Summary and Environmental Impact Volume from the Summary of Application Requirements table. This Notice of Funding Opportunity (NOFO) will seek proposals for specific research and development (R&D) projects to improve recovery efficiency from unconventional oil and natural gas reservoirs and to advance technologies for the treatment of flowback and produced water from oil and natural gas production operations. Despite increasing energy for demand, recovery efficiency for oil and natural gas from unconventional reservoirs can average less than 10 percent. This NOFO will enable rapid field deployment of a variety of novel technologies and processes related to improving primary and enhanced recovery with the goal of significantly improving resource recovery and accelerating industry uptake. This NOFO will also support the field testing and validation of water treatment technologies of produced water from oil and natural gas production operations to avoid deep well injection and potential issues with induced seismicity and interaction with underground sources of drinking water.

UK registered organisations can apply for a share of up to £150 million. The funding will be to develop, deploy and operate innovative clean maritime solutions for three years in a real world environment. This funding is from the Department for Transport.

Advancing Oil and Natural Gas Production and Delivery This Notice of Funding Opportunity (NOFO) is seeking proposals to advance cost-effective technologies for improving the efficiency, reliability, and resilience of the Unites States oil and natural gas supply chain. This funding opportunity spans research and development efforts focused on enhancing resource utilization, modernizing infrastructure, and accelerating digital transformation within the sector.

Expected Outcome: Project results are expected to contribute to all of the following expected outcomes: Measurable reduction in the costs of deep renovation compared to current best practices; Measurable increase in resource and energy efficiency compared to current best practices; Measurable reduction in the number of days when occupants are disturbed due to renovation works; Measurable reduction of dust, noise, waste and pollutant and greenhouse emissions on the construction site compared to current best practices. Scope: Meeting Europe’s ambition for the renovation of the housing stock requires innovative approaches that improve buildings’ energy performance and occupants’ satisfaction, at a reduced cost while speeding up the renovation process and minimising impact on the construction site and disturbance for occupants. Renovation approaches should cover the whole workflow from design, off-site manufacturing and on-site installation to strategies for maintenance, operation and end of life. Proposals are expected to address all of the following: Demonstrate cost-effective approaches (comprising design, planning and construction processes and techniques) for deep renovation to…

Scope: Proposals innovations should address one or more of the several domains : WBG substrates to reduce EU dependency on material and provide more sustainable, industrially compatible solutions. WBG platform for cost effectiveness, available in 300mm for GaN and/or SiC to improve yield and power density and close gaps in the value chain. A toolbox (e.g. wafer cut, smart stacking, thin layer transfer, epitaxy, UWBG materials) for further innovation schemes. Next generation or optimised new power semiconductor devices fitting their application. Adding intelligence to power semiconductor devices on control and/or sensor side. Facilitate the propagation of EU Packaging/Integration excellence along the entire value chain e.g. pre-packages or power semiconductor device packaging solutions to enable power device/system integration and strengthen Europe’s competitiveness in advanced packaging. Explore the use of heterogeneous and functional integration for improved performance, reliability, robustness and cost competitiveness. Rising operative voltage, frequency, current and thermal features that are common challenge on power electronics across the different application sectors. Provide…

Expected Outcome: Proposals submitted to this call are expected to address several of the following elements: • Scaling of wafer-level photonic processes for key materials (e.g. SiN, InP, GaAs),including process integration, yield optimisation, and manufacturability at highvolumes. • Development of packaging and test solutions that are scalable, automated, andcompatible with co-packaged optics and advanced photonic-electronic integration. • Integration of heterogeneous materials and components, such as on-chip lasers,modulators, and detectors, using advanced packaging and assembly approaches. • Design-process-equipment co-optimisation, enabling repeatable, cost-effectiveproduction of complex photonic circuits and systems, including use of PDKs andvalidated building blocks. • Demonstration of system-level functionality through application-relevant use casesin strategic sectors (e.g. AI, sensing, telecommunication, mobility, health, defence),with quantified performance metrics and clear market relevance.

Expected Outcome: the proposals under this call are expected to address one or more of the following subjects : • Enhanced personalized monitoring, care and treatments, focusing on the development of highly customized healthcare solutions, including the required research and diagnostic tools, tailored to individual needs, covering various scenarios such as chronic disease management, physiotherapy, precision diagnosis, personalized medicine/treatment, pre- and postoperative care, and daily assistance in homes and common spaces. It also targets effective management of chronic diseases and elderly care through personalized monitoring and interventions facilitated by advanced sensor technologies and edge-to-cloud solutions. This includes the development and integration of solutions for Hospitalization at Home, enabling patients to receive complex, remotely supervised care using intelligent medical devices capable of sensing, analysing, and transmitting real-time data. This requires a continuum, from in-hospital diagnostics to robust, long-term patient support at home via AI-driven care pathways and hospitalization at home. • Prevention and treatment of diseases, allowing the improved…

Expected Outcome: Successful proposals will contribute to the Chemicals Strategy for Sustainability and Ecodesign for Sustainable Products Regulation, the Chemical Industry Action Plan, the Clean Industrial Deal as well as the Horizon Europe Mission "Restore our Ocean and Waters by 2030" in particular to Objective 2: "Prevent and eliminate pollution of our oceans, Seas and waters". Projects results are expected to contribute to the following expected outcomes: Full industrial scale biorefinery and related value chain(s) to produce SSbD bio-based solutions for home and/or personal care sector with significantly improved sustainability. Wider availability of bio-based products in home and/or personal care sector meeting both regulatory standards and technical performance requirements. Increased consumer/end user acceptance of bio-based solutions, facilitating market uptake. Contribution to the EU strategic autonomy, resilience and competitiveness, reducing the fossil feedstock dependence for chemicals production and minimising biomass imports dependencies. Scope: The home and personal care sector, including fast-moving consumer goods (FMCG) and cosmetics, is a key industry where…