Alternatives to Christmas Lights

We require a rotating machine manufacturer to design, build and install a 5MVA 11kV 50Hz to 6.6kV 60Hz Rotary Frequency Convertor. Both machines shall be synchronous with a mechanical coupling joining the 10-pole motor to the 12-pole generator. There is a requirement to be able to physically rotate the generator stator to enable manipulation of the phase and load angle via racking motor or actuator. The machine should come complete with a starting reactor and contactor connected to the neutral point of the motor, to limit the inrush current on startup to approximately 400A. Control of the machine starting reactor and racking equipment shall be by an external control system, which shall not form part of the machine scope of supply.

Portsmouth Naval Base require a Portable Skid Mounted Cable Management System (CMS) to power some of their vessels. Each reel shall be capable of supplying a 60Hz electrical supply, up to 690V and 350A.

Palladium as the delivery partner for the Foreign, Commonwealth and Development Office (FCDO) funded UK Partnering for Accelerate Climate Transitions (UK PACT) programme invites you to submit a quotation for the services detailed in this RFQ. The Philippines is scaling up offshore wind to meet ambitious renewable energy targets, with upcoming auction rounds expected to unlock significant capacity. As the sector advances, attention is shifting toward enabling infrastructure particularly ports, which are critical for construction, staging, installation, and long-term operations. While initial assessments by partners such as ADB and GWEC have focused on public ports, the scale of planned deployment requires expanded port capacity and stronger private sector participation. However, there remains limited clarity on how to structure offshore wind port development to attract investment that is technically viable, commercially sound, and aligned with Department of Energy (DOE) deployment timelines. UK PACT, working with DOE and other agencies, seeks to address this gap by supporting privately led port development and strengthening decision-making, investment readiness, and early market engagement. This intervention will be delivered in two phases. Phase 1 will establish the foundations for private sector participation by drawing on UK experience, developing a Private Offshore Wind Port Development Framework, and identifying and prioritizing suitable port locations particularly in areas such as South Mindoro and Negros Occidental based on technical suitability and readiness. Phase 2 will undertake detailed technical and commercial feasibility assessments of three shortlisted sites, including infrastructure requirements, cost and financial analysis, environmental and regulatory considerations, and market validation Interested suppliers/consortia are encouraged to review the RfQ documentation and submit your proposal in accordance with the instructions above by the Close Date and Time. This RFQ includes the following materials: Schedule 1 - Terms of Reference Schedule 2 - Instructions for submission Schedule 3 - Terms and Conditions Annex I - RFQ Response Form Annex II - Budget and workplan template

This is for the purchase of 60 Hz Transformers for Portsmouth Naval Base.

Remove existing electrical equipment and install new infrastructure for Christmas lighting scheme through Battle High Street. Tenders to be submitted to the Clerk's Office, The Almonry, High Street, Battle, TN33 0EA or via email clerk@battletowncouncil.gov.uk

As a preferred contractor you would be required to quote for and carry out groundwork on behalf of TTC on as needed basis. This might include path and car park surface repairs.

The Norbury School invites suitably qualified and experienced contractors to submit RFQ (Request for Quotes) proposals for the replacement of the existing failed artificial grass surfacing and associated groundwork works at the School premises. A drainage system will also be part of the works. The project must be programmed to commence immediately following the end of the School summer term in July 2026 and achieve full practical completion prior to the commencement of the September 2026 term to avoid disruption to School operations, staff, pupils, and visitors. The estimated resurfacing area is approximately 565 square metres. The Contractor shall provide all labour, supervision, plant, materials, temporary works, transport, testing, certification, waste management, and all associated works necessary to complete the project in accordance with this specification and all applicable UK legislation, standards, and health and safety requirements. Please contact our procurement consultant, Mr. Mike Newell at mnewell@procurementforschools.com to obtain the tender pack and arrange a site visit. Please DO NOT contact the school directly as all communication must go through our consultant. Additional information: Please contact our procurement consultant, Mr. Mike Newell at mnewell@procurementforschools.com to obtain the tender pack.

College is seeking to purchase a CNC Machine. For more details, please review Appendix A - Specification document. To access this competition: Registered: Login to https://suppliers.multiquote.com and view the opportunity CA18070. Not registered: Visit https://suppliers.multiquote.com then register and quote CA18070 as the reason for registration. Any queries please contact MultiQuote on 020 3920 8054.

Project Summary: Installation of water pipe infrastructure and associated groundworks Location: Park View, Broseley (main road connection) to Allotment Site, adjacent to Sub Station Gate Tender Submission Deadline: 30 June 2026

Chemonics Group UK Limited which is implementing the Partnership Fund for a Resilient Ukraine Phase 2 (PFRU-2) Project as part of international technical assistance (hereinafter referred to as Chemonics) invites you to submit a Tender for Procurement of water tanks and compact mobile water filtration stations

UK registered organisations can apply for a share of up to £121 million across the three strands of this competition for innovative clean maritime technologies. This funding is from the Department for Transport (DfT).

UK registered organisations can apply for a share of up to £121 million across the three strands of this competition for innovative clean maritime technologies. This funding is from the Department for Transport (DfT).