Dynamic Purchasing System for Retrofit Programme Delivery Services

We are seeking applications from suitably qualified and accredited Independent Connection Providers (ICPs), Self-Lay Providers (SLPs), and multi-utility contractors to deliver contestable utility connection works across several active construction sites in London. Please note that the estimated contract value shown is based on a per site average. The works encompass the design, procurement, excavation, installation, testing, and commissioning of primary utility infrastructure for: - Power (HV/LV distribution and substation connections) - Water (Main tapping, metering, chlorination, and adoption prep) - Telecommunications (Ducting, chambers, and fibre integration) SCOPE OF WORKS BY UTILITY a) Power Infrastructure: - Installation of High Voltage (HV) and Low Voltage (LV) cables. - Substation base construction, transformer positioning, and jointing. - Delivery of contestable works under UK Power Networks (UKPN) adoption standards. b) Water Infrastructure: - Main connections, boundary box installations, and site distribution pipework. - Pressure testing, chlorination, and water sampling under Thames Water / Affinity Water standards. c) Telecoms & Communications: - Installation of Openreach / Virgin Media / Altnets compliant ducting and footway chambers. - Cable pulling, lead-in installation, and box terminations. LONDON OPERATIONAL CONSTRAINTS & SITE CONDITIONS Contracts will take place in high-density urban environments. Bidders must demonstrate proven capability in managing: - NRSWA Compliance & Highway Authorities: Securing Section 50/171 licenses, managing Traffic Management (TM) schemes, and adhering to London Borough / TfL permit systems. - Sub-surface Utilities: Operating in congested underground service environments utilizing PAS 128 (Type B/A) utility mapping and GPR scanning prior to excavation. - Low Emission Requirements: Compliance with London's NRMM (Non-Road Mobile Machinery) emissions standards and FORS (Fleet Operator Recognition Scheme) Silver/Gold for site deliveries. CONTRACTUAL STRUCTURE We reserve the right to award this scope as a single multi-utility package or split the requirements into trade-specific lots (Water, Power, Telecoms) depending on response quality.

WC1857725 - AKI- CIDP Tool Ref: 126596 (AK)-Akrotiri Mole Steel Jetty - Refurbish Entire Structure * Please provide a detailed description of the notice you are adding: Demolish existing steel jetty, complete with concrete beam along with the structures/ buildings south of the proposed new quay wall. Reconstruct new jetty using both precast units and in-situ concrete, complete with foundation, relief prism, drainage system, including oil water separator and equipped with fenders, bollards, handrails, ladders and M&E services (power & water supply) related to the Mole jetting as well as lighting installation for both new jetty and other Mole area and various reinstatement works of the affected surfaces (concrete & asphalt). The Provisional Key Tender dates for the project are as follows: - Expression of interest: 20/07/2026 - Expression of interest return: 27/07/2026 - Invitation to Tender: 06/08/2026 - Tender Return Date: 16/10/2026 - Contract award: 20/12/2027 - Commencement of work: 07/01/2027 - Completion of work: 30/08/2027 Note: Due to Environmental Issues Works within water are to be completed by 30 April 2027. The completion of the works will be on 30/08/2028, considering the turtle nesting period falls between April and November when no works are allowed underwater. The currency of this project is Euro (€). The location of this project is Cyprus (British Forces, RAF Akrotiri). Additional information: Work commencement and completion dates will be subject to MOD DIO's agreement, as they will be dictated by the DIO Environmental Advisor to avoid the environmental restricted periods (e.g. pre-determined breeding periods, turtle nesting period, etc.). This will lead to phasing of the works. ATTACHMENTS: 1. EOI (expression of interest) form 2. PQQ (pre-qualification questionnaire) form Both forms must be completed and returned by the interested tenderers

Arc Property Services Partnership Ltd (the Client), is seeking to appoint a single contractor to deliver painting and decorating works under an NEC4 Term Service Short Contract. The Contract will also be made available to VIA East Midlands Ltd (Participating Organisation). The scope of works will include the provision of painting and decorating services across a varied portfolio of operational and commercial properties across the operational estate that manages on behalf of Nottinghamshire County Council (NCC) and other customers. Works will be undertaken at sites located across Nottinghamshire (main area), Derbyshire, South Yorkshire and Leicestershire. The contract is expected to commence in February 2027 for an initial period of two years, with the option to extend for up to two additional periods of two years each, up to a maximum potential end date in 2033 (2+2+2 = 6 years). The estimated total value of the contract over its full potential duration is approximately £780,000 (inclusive of VAT). This only an estimate and the award will be based on the outcome of the tender process. This procurement will be carried out as a two-stage process comprising a Pre-Qualification Questionnaire (PQQ) stage followed by an Invitation to Tender (ITT). One supplier will be appointed. Suppliers will be invited to submit a Stage 1 response demonstrating their suitability, capability, capacity, relevant experience, technical competence, accreditations, financial standing and compliance with the Authority's minimum requirements. Responses will be evaluated against the published selection criteria. Following evaluation, the Authority intends to shortlist the highest-scoring suppliers who meet the minimum requirements and invite them to participate in Stage 2. The Authority reserves the right to limit the number of suppliers progressing to the next stage in accordance with the criteria set out in the procurement documents. Stage 2 - Invitation to Submit Tender Shortlisted suppliers will be invited to submit a detailed tender for the painting and decorating works and associated works across the Client's estate. Tenders will be evaluated based on the published award criteria using the Most Advantageous Tender (MAT) approach (price to quality ratio: price30%/quality70%). The successful supplier will be expected to work collaboratively with the Client, contribute to social value outcomes, support carbon reduction objectives and demonstrate high standards of health and safety, compliance, and service delivery across all commissioned works. Additional information: The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement. Bidders should be made aware that as the Client's main customer is NCC, there is a risk of increase or decrease in the number of sites managed and the types of properties serviced, due to the proposal of local government reorganisation. The Authority reserves the right to amend the procurement timetable, request clarifications, and conduct presentations, interviews or site visits where considered necessary and proportionate.

Colchester Borough Homes (the Authority) on behalf of Colchester City Council (the Council) wishes to commission a contractor to undertake the following: The works briefly comprise the re-covering of felt flat roof coverings to two storey flat blocks at various locations within the Colchester District. The works will require stripping up and replacement of roof decks to some locations and overlaying to others. To all locations the installation of a designed, tapered insulation system will be required. Where roof deck replacement is required, full temporary roof protection (tin hat) will be required. The blocks have existing photovoltaic panels installed, these are to be removed and reinstated by the Contractor or by specialist named subcontractors whose works are to be managed by the principal contractor. This description is non exhaustive and a summary only; full details are contained within the accompanying documents. The form of contract to be used for this tender exercise is the JCT Intermediate Building Contract 2016 Edition (IC2016). Additional information: The contracting authority considers that this contract may be suitable for economic operators that are small or medium enterprises (SMEs). However, any selection of tenderers will be based solely on the criteria set out for the procurement. The contract period provided is a guide, although the works shall take no longer than 22 weeks. Provisional dates stated as w/c 28th September 2026 to w/e 12 March 2027 (allowing a 2-week break for the Festive Period). Bidders are to confirm their timeline in 3.3 of the Bidder Response Document.

The works comprise the phased refurbishment and reconfiguration of an existing area within St Helier Hospital to provide a new Bed Store and Medical Records Office. The successful contractor shall undertake all necessary architectural, mechanical, electrical and associated enabling works required to deliver a fully operational facility in accordance with current NHS Health Technical Memoranda (HTMs), Building Regulations and Trust standards. The scope of works includes, but is not limited to: Establishment of fully compliant infection prevention and control measures, including dust containment, temporary partitions, protection of adjacent hospital areas and phased working. Internal strip-out and removal of redundant fixtures, fittings, doors, partitions and associated services. Formation of new fire-rated partitions, alterations to existing openings and installation of new FD60 doorsets with associated ironmongery, glazing and access control modifications. Alterations to internal layouts to accommodate the proposed Bed Store and Medical Records Office, including relocation of doors and sink positions where required. Installation of new joinery, worktops, cupboards, shelving and associated fittings. Mechanical alterations including domestic hot and cold water services, drainage modifications, insulation, relocation of sanitary fittings and associated builders' work. Electrical alterations including strip-out of existing installations, complete rewiring where required, new containment, lighting, emergency lighting, small power, fire alarm modifications and associated testing and commissioning. Medical gas modifications where identified within the contract documents, undertaken by competent specialists in accordance with HTM 02-01 requirements. Builders' work associated with all mechanical and electrical installations, together with making good and reinstatement of all disturbed finishes. Testing, commissioning, certification, provision of as-built documentation and handover of all systems upon completion. All works shall be undertaken within a live acute hospital environment, maintaining safe operation of adjacent clinical services and complying with all Trust permit-to-work procedures, infection prevention requirements, NHS standards and statutory legislation. To access this competition: Registered: Login to https://suppliers.multiquote.com and view the opportunity CA18222. Not registered: Visit https://suppliers.multiquote.com then register and quote CA18222 as the reason for registration. Any queries please contact MultiQuote on 020 3920 8054.

Scope of Work To undertake, removal, replacement, re-decoration and remediation of external roofing sheets to a multitude of buildings across an MOD establishment. This will include the provision of specialist contractors and access equipment.

Procure Plus are a value focused, not for profit company that specialises in the procurement of goods and services related to both the new build, repair, and maintenance of social housing. Procure Plus wishes to procure and enter into a DPS agreement for consultancy services.

Procure Plus are a value focused, not for profit company that specialises in the procurement of goods and services related to both the new build, repair, and maintenance of social housing. Procure Plus wishes to enter into an agreement for commercial (non-domestic) retrofit consultancy and works. The DPS is intended for use by the wider public sector.

Expected Outcome: Objectives and profile of the ERC Plus Grant Principal Investigator The ERC Plus Grant supports outstanding Principal Investigators who address a major scientific challenge. Applications for ERC Plus Grants should be for projects that could not be carried out with a regular ERC grant. Applicants should explain how the proposed project aims go beyond those of a regular ERC project, for example, because they have a vision to transform their field or open a new field of research. Scholars at all career stages can apply for an ERC Plus Grant if they have an outstanding record of scientific achievement at the forefront of their field. Their intellectual leadership will be evaluated in comparison to peers at their own career stage. It is expected that a researcher may be the Principal Investigator of only one ERC Plus Grant in their lifetime. Applicants should be aware that every year, only some 30 ERC Plus Grants can be awarded across all fields and all career stages, compared to approximately 1000 Starting, Consolidator and Advanced Grants. This level of competitiveness should be taken into account when considering whether to submit an application. Size of ERC Plus…

Expected Outcome: Proposals submitted to this call are expected to address several of the following elements: • Scaling of wafer-level photonic processes for key materials (e.g. SiN, InP, GaAs),including process integration, yield optimisation, and manufacturability at highvolumes. • Development of packaging and test solutions that are scalable, automated, andcompatible with co-packaged optics and advanced photonic-electronic integration. • Integration of heterogeneous materials and components, such as on-chip lasers,modulators, and detectors, using advanced packaging and assembly approaches. • Design-process-equipment co-optimisation, enabling repeatable, cost-effectiveproduction of complex photonic circuits and systems, including use of PDKs andvalidated building blocks. • Demonstration of system-level functionality through application-relevant use casesin strategic sectors (e.g. AI, sensing, telecommunication, mobility, health, defence),with quantified performance metrics and clear market relevance.