Professional Services grants in GB

For the past few years, CPC has outsourced the contract management of its HR, Payroll and Employee Screening Services framework agreement for various reasons, one of which being capacity internally. We are now looking to bring this framework back in-house and this tender exercise will form the new iteration of the framework. Suppliers must be capable of delivering high-quality, cost-effective HR, Payroll and Employee Screening Services to institutions such as schools, academies, colleges, universities, and educational trusts, as well as local authorities and the wider public sector. CPC will be using the MultiQuote e-Tendering platform to carry out this tender. In order to express your interest in this tender and obtain the tender documents, please register or log in at: https://suppliers.multiquote.com/Page/Login.aspx If you have any issues when using MultiQuote, please contact Elcom Ltd on 020 3920 8054 or email supplier@elcom.com Includes Lots: Lot 1: Lot 1 - Human Resource Services Lot 2: Lot 2 - Payroll Services Lot 3: Lot 3 - Employee Screening Services Lot 4: Lot 4 - DBS Screening Services To access this competition: Registered: Login to https://suppliers.multiquote.com and view the opportunity CA17950. Not registered: Visit https://suppliers.multiquote.com then register and quote CA17950 as the reason for registration. Any queries please contact MultiQuote on 020 3920 8054.

Expression of Interest T5D MEP Subcontractor T5D Attenuator Overhaul (Survey / RIBA 4iii) Scope The T5D Rail-tunnel Ventilation Shaft is located adjacent to T5D at its North and can be accessed from the bottom (Level 6) via the trackside of the HEX tunnel or from the top (level 7) via Airside. The objective is to replace the four attenuators in the T5D Shaft because they are at their end of life. The renewal of the T5D attenuators aims to reduce the risk of debris entering fans, tunnels and station, prevent the fans from failing in any fire scenario and provide ventilation and smoke clearance for the Heathrow Rail Tunnels. This improves safety conditions in Heathrow Rail Tunnels and improves resilience of systems. In addition, less maintenance and repair are required for the attenuator. Each attenuator is formed of four quadrants weighing around 1160 kg. Review MEP systems along the airflow and advise replacement/modification to bring them up to compliance. Surveys will be carried out by MEP Subcontractor under the direction of the Design Consultant (Employed by the Client). Item Question Q1 What capability do you have of understanding the requirements for replacing attenuators etc., considering the constraints of an operational rail network? Q2 What capability do you have of carrying out a survey of the T5D Shaft during non-operational hours to provide all the information required to complete the RIBA 4ii design by the Design Consultant and the RIBA 4iii by the MEP Subcontractor? • M&E Services within the air path • Fan and Attenuator • Structure Note: - RIBA 5 onwards including construction is excluded.

Expression of Interest Tunnel Vent, Fans and Fan Drives MEP Subcontractor Tunnel Vent, Fans and Fan Drives (Survey and RIBA 4) Scope The objective of this scope is to replace components that form part of the ventilation system at Central Terminal Area (CTA) North and South, Terminal 4 North and South and Sipson Farm, that are at their end of life. The components of concern are Fan Drives and Low Voltage Air Circuit Breakers. It is proposed that all components for the 8 No. existing Variable Speed Drives (VSD) which are close to their designed lifetime are to be replaced, together with the panel. It is proposed that all components for the 5 No. existing Direct On-Line (DOL) starters which are close to their designed lifetime are to be replaced, together with the panel are replaced with VSD's. The VSDs are to be connected to the Tunnel Control System (TCS). The incoming air circuit breakers (ACB's) and the low voltage protection devices (MCCB/MCB's) within the existing switch gear will be replaced with new devices. Where the impact is significant, this may lead to replacing the entire LV switchgear and the DOL panels for the associated equipment. New lighting will be provided by energy-efficient LED luminaires, as the existing lighting system is in poor condition. As part of small power provision, 240V socket outlet assemblies shall be provided near damper units. The existing junction boxes and cable termination boxes need to be replaced with new equipment. Item Question Q1 What capability do you have of understanding the requirements for replacing Electrical infrastructure etc., Specifically considering the constraints of an operational rail network? Q2 What capability do you have of carrying out a survey of the 5 ventilation buildings non-operational hours to provide all the information required to complete the RIBA 4 design? Note: - RIBA 5 onwards including construction is excluded.

The T5D Rail-tunnel Ventilation Shaft is located adjacent to T5D at its North and can be accessed from the bottom (Level 6) via the trackside of the HEX tunnel or from the top (level 7) via Airside. The objective is to replace the four attenuators in the T5D Shaft because they are at their end of life. The renewal of the T5D attenuators aims to reduce the risk of debris entering fans, tunnels and station, prevent the fans from failing in any fire scenario and provide ventilation and smoke clearance for the Heathrow Rail Tunnels. This improves safety conditions within Heathrow Rail Tunnels and improves resilience of systems. In addition, less maintenance and repair are required for the attenuator. Each attenuator is formed of four quadrants weighing around 1160 kg. Review MEP systems along the airflow and advise replacement/modification to bring them up to compliance. Surveys will be carried out by others (Employed by the Client) under the direction of the Design Consultant Item Question Q1 Do you have experience with Underground rail network ventilation resilience? Requirement: Ventilation Resilience Report required for the HAL Rail underground network. Q2 What capability do you have of air flow modeling for fans / attenuators etc.? Requirement: Model the existing configuration with one fan operating, and both fans operating and then repeat the modelling with shaft sub divided to allow one set of attenuators to be replaced while the other is operational. Q3 What capability do you have of understanding the requirements for specifying replacement attenuators etc., Specifically considering the constraints of an operational rail network? Note: - RIBA 5 onwards including construction is excluded.

Kier Transportation require a Subcontractor to undertake Third Party Independent Inspections for Steelwork fabrication, Precast Concrete fabrication and on site waterproofing over 7 bridges (14 structures) on the M6 Lune Gorge Junction 37 to 38. Please note that some of the inspection work may be required to be undertaken in Europe. We will use the Build UK Common Assessment Criteria (CAS) to ensure a consistent minimum business competence. If your company possesses necessary qualifications and is interested in bidding for this project, please email infrastructure.procurement@kier.co.uk with your company's portfolio, relevant experience, and references for further evaluation.

FindBusinessSupport.gov.scot gives an overview of grants, loans, funding, advice and other support available to businesses in Scotland, offered by over 100 Scottish public sector organisations, conveniently in one place. Information is available for businesses of all sizes and sectors, from start-ups and sole traders to large enterprises and includes support for social enterprises.

DSP1 1376 - Winter pollarding 2026 ROUTE 3\r \r Additional information: https://londonconstructionprogramme.co.uk/services/dynamic-purchasing-systems/

Supporting UK screen content businesses across film, TV, animation and interactive narrative video games to enhance their international activities.

MEGS provides match-funding grant support to representatives of UK-based music acts (normally music management companies or record labels who meet SME criteria) to help deliver high-quality marketing and promotion campaigns normally linked to international tours to enable these acts to grow their international business. The scheme is targeted at artists that have achieved reasonable levels of commercial success in the UK and are now looking to break internationally. Successful recipients can claim no more than 50 per cent of eligible expenditure for their projects. No UK activity can be funded.

MWDA is seeking a creative agency to deliver a strategic behavioural change campaign under the Recycle Right brand. The campaign follows on from the implementation of the UK government's Simpler Recycling legislation, focusing on new materials now eligible for kerbside collection across the Liverpool City Region.

UKAEA requires a consultant capable of delivering integrated marketing and communications support across campaign delivery, content creation, stakeholder engagement and media activity for Year 1. The Consultant may be required to provide communications planning and advisory support aligned to the evolving needs of the CROSS programme.

Appointment of an MEP Consultant to undertake survey, feasibility, detailed design, technical specification and tender support services for the replacement of the existing theatre ventilation system serving the QMCH Children's Theatre and Dental Theatre suites at St Helier Hospital. The design shall deliver a fully HTM 03-01 compliant healthcare ventilation solution, including associated mechanical, electrical, controls and commissioning requirements. To access this competition: Registered: Login to https://suppliers.multiquote.com and view the opportunity CA17956. Not registered: Visit https://suppliers.multiquote.com then register and quote CA17956 as the reason for registration. Any queries please contact MultiQuote on 020 3920 8054.

Please find the request for a quote and terms and conditions attached. 1. Agree to the terms and conditions and send your acceptance by email to Caitlyn Murphy caitlyn.murphy@wales.nhs.uk 2. Submit your quote on Multiquote with a clear method statement and proforma invoice as an attachment. No quotes through email are accepted - To access this competition: login to https://suppliers.multiquote.com and view the opportunity RA358273. Not registered on MultiQuote - visit https://suppliers.multiquote.com then register and quote RA358273 as the reason for registration. Any queries please contact MultiQuote on 0151 482 9230.

13648 EST 2025 MOP P1 and P2 This opportunity has been distributed on adamprocure.co.uk