Research grants

UK registered organisations can apply for a share of up to £121 million across the three strands of this competition for innovative clean maritime technologies. This funding is from the Department for Transport (DfT).

Scope: Proposals innovations should address one or more of the several domains : WBG substrates to reduce EU dependency on material and provide more sustainable, industrially compatible solutions. WBG platform for cost effectiveness, available in 300mm for GaN and/or SiC to improve yield and power density and close gaps in the value chain. A toolbox (e.g. wafer cut, smart stacking, thin layer transfer, epitaxy, UWBG materials) for further innovation schemes. Next generation or optimised new power semiconductor devices fitting their application. Adding intelligence to power semiconductor devices on control and/or sensor side. Facilitate the propagation of EU Packaging/Integration excellence along the entire value chain e.g. pre-packages or power semiconductor device packaging solutions to enable power device/system integration and strengthen Europe’s competitiveness in advanced packaging. Explore the use of heterogeneous and functional integration for improved performance, reliability, robustness and cost competitiveness. Rising operative voltage, frequency, current and thermal features that are common challenge on power electronics across the different application sectors. Provide…

Expected Impact: Projects funded under this call are expected to deliver tangible industrial outputs that demonstrably advance the readiness and affordability of future governmental Ka-band user terminals for IRIS2 and GOVSATCOM services. Expected outputs include, for example: qualified production processes, calibrated sub-assemblies, pilot-run units, validated manufacturing equipment chains or manufacturing cost models. Purely analytical deliverables (studies, design reports) are not sufficient as primary outputs but may complement the above. Where relevant, outputs shall include documented design assumptions, interface parameters or process specifications enabling adaptation to different terminal configurations with limited re-engineering, so as to support uptake in follow-on integration, pilot deployment and scale-up activities. Objective: The aim of this call for proposals is to advance the industrial readiness of European Ka-band user terminal technologies, subsystems and manufacturing processes, with a view to enabling cost-effective production of user terminals for services provided under the Union secure connectivity programme (IRIS²) and GOVSATCOM. The target reference…

Expected Outcome: Expected outcomes: A sustained pipeline of highly qualified semiconductor graduates, with shorter time-to-readiness for industry roles; greater inflow of diverse talent including women and underrepresented groups; improved intra- and extra-EU student mobility; and strong complementarity with existing Chips Act infrastructure such as pilot lines, design platforms, and Competence Centres. Scope: This call funds the creation of specialised academic "Hubs of Excellence" in critical semiconductor technology areas (e.g. chip design, manufacturing, photonics, power electronics). Projects should build industry-aligned Bachelor, Master, and PhD programmes.

Expected Outcome: The expected outcomes of this topic are : A common EU evaluation platform for AI chips and racks, with transparent KPIs, workloads and benchmark reports used for Chips JU selection and procurement decisions. First pilot deployments of European AI compute systems validated for EU sovereign partitions of AI infrastructure. Structured collaboration between buyers and suppliers, supporting deployment, integration and optimisation of European AI compute solutions. Stronger EU demand for European AI chips and racks, helping to create a market for deployment-ready solutions. Increased EU technological sovereignty across the AI compute stack for European datacentres.

UK registered organisations can apply for a share of up to £121 million across the three strands of this competition for innovative clean maritime technologies. This funding is from the Department for Transport (DfT).

Expected Outcome: The focus needs to be on areas where Digital Partnership countries bring strong complementary expertise, including advanced packaging, heterogeneous integration, and photonic chip technologies. The topic would aim to foster collaboration between European and Digital Partnership countries’ R&I communities. Projects are expected to contribute to the following outcomes: • Innovative design and integration concepts for neuromorphic computing systems supporting very low energy consumption, connectivity, embedded functions for mobile applications. • Alternative manufacturing process technologies for semiconductor chips including frontend or backend for heterogenous integration. The technologies should sustain in the mid- and long-term the fast-paced evolution of device performance, miniaturisation and cost, while reducing the environmental footprint. • Very advanced packaging solutions aiming heterogeneous integration of multiple functions and materials for applications in communication (RF, mmW or THz), sensing, actuating, power management and active/passive integration.

Expected Outcome: Objectives and profile of the ERC Plus Grant Principal Investigator The ERC Plus Grant supports outstanding Principal Investigators who address a major scientific challenge. Applications for ERC Plus Grants should be for projects that could not be carried out with a regular ERC grant. Applicants should explain how the proposed project aims go beyond those of a regular ERC project, for example, because they have a vision to transform their field or open a new field of research. Scholars at all career stages can apply for an ERC Plus Grant if they have an outstanding record of scientific achievement at the forefront of their field. Their intellectual leadership will be evaluated in comparison to peers at their own career stage. It is expected that a researcher may be the Principal Investigator of only one ERC Plus Grant in their lifetime. Applicants should be aware that every year, only some 30 ERC Plus Grants can be awarded across all fields and all career stages, compared to approximately 1000 Starting, Consolidator and Advanced Grants. This level of competitiveness should be taken into account when considering whether to submit an application. Size of ERC Plus…

Expected Outcome: The targeted outcomes reflect the above challenges and cover a comprehensive Front End module design which: Covers the FR3 range as defined by the relevant Agenda Item of WRC 27 (7 to 15 GHz range) with possible extension up to 24 GHz if required by some regional implementations, with inherent tuning capabilities to accommodate potential regional variations. Mitigates interferences with incumbent FR3 band users and maximises sharing capabilities across the band in line with the European regulatory approach on spectrum sharing. Enables integration of a large number of antenna elements beyond the State of the Art and support massive MIMO implementation with compensation of increased path loss compared to 5G FR1 implementations. Enables at least an order-of-magnitude increase in RF processing compared to 5G FR1 implementations. Enables 5G cell site reuse and minimises deployment complexity on top of 5G sites deployment. Enables low-cost and low energy implementation of the elementary constituent modules, efficient packaging and is mainly based on the integration of microelectronics heterogeneous technologies where European industry has strong expertise and…

Expected Outcome: Projects are expected to contribute to the following expected outcomes: Advanced heterogeneous integration, particularly in 2.5D and 3D packaging and integrated photonics, to support AI functionalities. Standardised chiplet interfaces, enabling interoperability and fostering a dynamic chiplet ecosystem Expected outcomes should have direct and immediate impact on European industry. Furthermore, proposed projects should demonstrate solutions across laboratory and pilot environments, with verification in semiconductor manufacturing use cases. The centre of gravity of envisaged work should address Technology Readiness Levels 5-7. Proposals also need to facilitate knowledge transfer and promote stakeholder engagement through industry workshops, publications, and networking events.

Expected Outcome: Proposals are expected to contribute to all following points: Significantly reduced EU dependency on imported battery-grade raw materials, specifically emerging technologies and carbon-based electrode materials. Established European value chains for next-generation battery materials, enhancing the EU's technological leadership and strategic autonomy. Scope: Proposals under this topic are expected to address all aspects for one of the following categories: 1. Sustainable Processing and Refining of next generation batteries-grade Material, delivering all of the following: Development and validation of innovative, environmentally friendly refining technologies for producing battery-grade metals and materials suitable for next-generation battery chemistries. This covers raw and advanced electrode materials for the components of sodium-ion batteries or beyond generation 3 [1] lithium-ion batteries Development of processes achieving significant reductions in carbon and ecological footprint, emissions of pollutants, energy usage, and chemical inputs. The selected processes should not negatively impact any of the aspects above or cause significant harm. Validation of…

Expected Outcome: Proposals are expected to contribute to all following points: The projects must fulfil the performance targets, at the cell and system level, corresponding to the specific targeted application, to be specified in the proposal. Appropriate KPI must be defined for the energy density (volumetric and gravimetric), Power density and C-rate, number of cycles and cost defined under operational conditions. Boost EU competitiveness in next-generation battery technologies for mobility applications. Develop pilot manufacturing capability for next generation lithium-based batteries. Strengthen the EU battery value chain, including new manufacturing equipment, automation, and scalable production processes. Advance the understanding of next-generation battery interfaces at an industrial scale, ensuring manufacturability, durability, and cost-effectiveness. In the case of aviation, the battery requirements should be compatible at minimum with EASA CS.23 (level 4), CS.27 and preferably with CS.25 categories. Scope: This topic will support the scaling-up of next generation (i.e., beyond generation 3) lithium-based batteries (e.g., semi and all-solid state, generation5) from cell…

Expected Outcome: Battery recycling is of strategic importance for both Europe and India, not only to keep raw materials in the respective territories but also to reduce the environmental impact of the recycling process. R&I in this area has been identified as a priority by the EU-India Trade and Technology Council’s Working Group on Green and Clean Energy Technology to reinforce bilateral cooperation. Project results are expected to contribute to all of the following expected outcomes: Battery recyclers based in the EU and India benefit from of the improved sustainability, safety, and affordability of innovative recycling processes. Stakeholders on battery recycling based in the EU and India benefit from each other’s experience on recycling logistics, including the informal processes and supply chain constraints. The cooperation between EU and India key researchers, institutions and industries which are active in battery recycling is supported and strengthened. Scope: Projects are expected to build a jointly operated recycling pilot line on Indian soil demonstrating innovative recycling processes for lithium-ion batteries going beyond the current state of the art in terms of…

Expected Outcome: This flagship pilot is the culmination of the entire activity catalogue carried out by the CCAM Partnership since its launch in 2021. It will combine in one project the most promising CCAM use-cases across three key domains, with the technological advancements from all its R&I clusters [1] supporting and enabling CCAM systems and services towards market uptake. This action is expected to contribute to all the following outcomes: Large-scale demonstrations of inclusive, user-oriented, and well-integrated CCAM systems and services for people and goods in mixed traffic through Field Operational Tests (FOTs), Technology Pilots, and Living Labs, building upon advanced and emerging SAE Level 2 systems to move towards SAE Level 3 and 4 functionalities, at multiple test sites and corridors showcasing CCAM potential [2] , for a minimum of 12 months. Validation of enabling technologies that facilitate the extension of Operational Design Domains (ODDs) in large-scale operations and enhance perception performance under poor lighting and adverse weather conditions in large-scale demonstrations and pilots. Assessment of deployment readiness and demonstration of technological…

Expected Outcome: Successful proposals will contribute to the implementation of the EU initiative on Biotechnology and Biomanufacturing and the EU Life Sciences Strategy as well as the updated EU Bioeconomy Strategy, the Clean Industrial Deal, the European Chemical Industry Action Plan, the upcoming EU Biotechnology and Circular Economy Acts. Projects results are expected to contribute to the following expected outcomes: Increased added value of residual biomass for biorefinery applications. Availability of a wider portfolio of sustainable bio-based products via industrial biotech. Robust, scalable and efficient biotech process(es) applicable to residual biomass. Scope: Diversifying biomass feedstock resources for bio-based products is key to contribute to resilience and strategic autonomy of bio-based operations. Industrial biotechnologies have showcased that they can play a key role to address residual biomass into valuable bio-based products. However, scaling up from research to demo scale requires addressing systemic and technical challenges. This entails the integration of adequate pretreatment and conversion processes, tailored to the targeted residual biomass and its…

Expected Outcome: The action should establish a supply chain data platform, as a digital twin of the semiconductor supply chain, which should: • Gather secure, anonymized data shared by companies, coming from both upstream and downstream industries. • Possibly make use of an existing digital reference14 of the semiconductor supply chain (based on semantic web technologies). • Be managed by a trusted intermediary and hosted on a trusted data sharing infrastructure (potentially leveraging secure Multi-Party Computation). • Provide access to each participating company (providing its data) to its own data and aggregate anonymised data. The action should support the data gathering from the companies involved. The action should support a global mapping of the semiconductor value chain, as regards to the capabilities and the products of each main company and its supply chain relationships. The action should also support conducting stress tests of the supply chain and develop risk analysis of the EU semiconductor supply chain. Finally, the action needs to support issuing early warnings and recommendations for proactive measures to the Commission and Member States to avoid any potential…

Treasury is publishing multiple funding opportunity notices for its RESTORE Act grant programs. This announcement applies only to the Centers of Excellence Research Grants Program.Trust Fund amounts are available to establish one or more Centers of Excellence through competitive subawards to nongovernmental entities and consortia in the Gulf Coast Region, including institutions of higher education. Funds may be used to establish Centers of Excellence, and by those Centers of Excellence for science, technology, and monitoring in one or more of the following disciplines as described in the RESTORE Act and Treasury’s implementing regulations at 31 CFR 34.704: 1) Coastal and deltaic sustainability, restoration, and protection, including solutions and technology that allow citizens to live in a safe and sustainable manner in a coastal delta in the Gulf Coast Region. 2) Coastal fisheries and wildlife ecosystem research and monitoring in the Gulf Coast Region. 3) Offshore energy development, including research and technology to improve the sustainable and safe development of energy resources in the Gulf of Mexico. 4) Sustainable and resilient growth, economic and commercial development in the Gulf Coast Region. 5) Comprehensive observation, monitoring, and mapping of the Gulf of Mexico.Eligible applicants issuing subawards to Center(s) of Excellence must establish and implement a program to monitor compliance with its subaward agreements.

Expected Outcome: Projects should contribute to all of the following expected outcomes: Deepened knowledge of specific factors favouring the growth of creative startups [1] , in particular those with potential for disruptive innovation [2] and/or cross-sectorial innovation impacts, is made available and promoted to policymakers, investors, funding- and enterprise support bodies. Effective methods to favour the growth of creative startups, in particular those with potential for disruptive innovation and/or cross-sectorial innovation impacts, are developed, tested and put in practice by industry, investors, funding- and enterprise support bodies, and relevant decision makers. Examples of creative startups scaling up and/or engaging in disruptive innovation are made available, with a view to increase the visibility and recognition of the innovative power of Europe’s creative startups. In addition, proposals should contribute to at least one of the following expected outcomes, depending on the option chosen (a or b below): The effectiveness of the methods developed is demonstrated by at least one creative startup supported via the action becoming a scaleup [3] in a Member State or an…

Expected Outcome: Projects should contribute to all of the following expected outcomes: Insights, recommendations, strategies, guidelines, methods and tools supporting full AI integration in CCSI practices become available to CCSI, policymakers, and stakeholders. Scenarios for co-created solutions tailored to CCSI needs, utilizing quality data and federated data sources, along with digital infrastructures, and inclusive cooperation processes, become available. Generally made available AI-powered and ethically designed solutions, tools and services in several CCSI areas benefit creators, cultural professionals, and society, including persons with disabilities and other specific needs, fostering innovative creative expressions and improving creative business models while preserving and enhancing cultural diversity, and inclusion. By mastering ethical and inclusive AI, CCSI are empowered drivers of culture, innovation, competitiveness and societal wellbeing. Scope: AI technologies are transformative, providing unprecedented opportunities for human creativity, experimentations and co-creations. AI profoundly impacts cultural and creative sectors and industries, changing practices,…

UK registered organisations can apply for a share of up to £121 million across the three strands of this competition for innovative clean maritime technologies. This funding is from the Department for Transport (DfT).

Expected Impact: The European Capital of Innovation Awards aim to champion inspiring cases of municipality-enabled innovation flourishing in cities. The Awards are a prestigious recognition for city administrators who are courageous enough to open up their governance practices to experimentation, to boost innovation by all means, to be a role model for other cities, and to push the boundaries of technology for the benefit of their citizens. In addition to the monetary reward, the prize brings high visibility in the form of renewed public interest and increased media coverage. A European prize to the most innovative cities ecosystems. The award will raise the profile of the cities that have developed and implemented innovative policies; established frameworks that boost breakthrough innovation; enhanced the city attractiveness towards investors, industry, enterprises and talents; helped to open up connections and strengthen links with other cities, promoting the replication of best practices in the innovation field; enhanced citizens’ involvement in the decision-making process; and supported cities resilience. Expected Outcome: The European Capital of Innovation Awards aim to…

Expected Outcome: Project results are expected to contribute to all the following expected outcomes: Assessment of Europe’s CCAM position in global competition, identifying strategic vulnerabilities, dependencies and opportunities across business models, supply chains, critical components, technological capabilities, infrastructure, and regulatory frameworks, supported by advanced AI-driven analytics and innovation mapping tools. Stakeholder-driven, participatory future scenarios and strategic pathways that define Europe’s leading role in the evolving geopolitical, technological, and economic landscape of CCAM. These should be developed using advanced foresight methods ( e.g. qualitative scenarios, horizon scanning, technology roadmapping, etc.), complemented by iterative validation through a minimum of 3 dedicated Living Labs selected to represent diverse European regions, urbanisation levels, and governance capacities, ensuring a structured, robust, and anticipatory approach to long-term decision-making. A data-driven understanding of the socioeconomic effects of different CCAM deployment pathways, based on a quantified assessment across Member States and Associated Countries,…

Expected Outcome: Projects should contribute to all of the following expected outcomes: The concept of sustainable competitiveness is analysed taking into account the shifts in geopolitics, global trade patterns, as well as changes in climate, the environment (including biodiversity loss [1] ), technology and demography. Policymakers are provided with recommendations and innovative solutions, including a toolbox to boost Member States and Associated Countries (labour) productivity while ensuring high social and environmental standards and increasing competitiveness within planetary boundaries. Scope: The Future of European competitiveness report (also known as the Draghi report) [2] analysed and discussed the reason for European declining competitiveness, productivity and growth vis-a-vis its main competitors. A competitive economy is defined as an economy whose sustained rate of productivity is able to drive growth and, consequently, income and welfare. Both the economy and the European social model have to adapt to the great drivers of change, including demography, technology, global trade patterns, climate, and geopolitical shifts. From its side, the European social model is…

Expected Outcome: Projects should contribute to all of the following expected outcomes: Deepened understanding and comprehensive evaluation of cultural policy models, creative industry ecosystems, and strategies for promoting creative industries across world regions, identifying good practices, success stories and replicable models. Innovative practices, policy approaches, shared challenges, and opportunities for cross-regional collaboration and global development of creative industries are identified. International equal partnerships and collaborations are established to exchange cultural policy approaches, boost creative industries, and/or support collaborative production or co-creation, facilitating knowledge transfer and capacity building among participating actors. Actionable strategies are available to policymakers, businesses, and stakeholders, for cross-regional collaborations that strengthen cultural ties, leverage creative industries, culture, and the arts as central to Global Europe, and support global culture- and creativity-driven innovation and resilience. Scope: This topic explores how international partnerships can strengthen cultural policies and creative…

Expected Outcome: Projects should contribute to all of the following expected outcomes. Country government innovation info sheets, trends, inspiring good practices, the most innovative solutions recently developed or work in progress for next-generation governance and future-informed public decision making in EU Member States and Associated Countries (MS/AC). Policy recommendations for both EU level and MS/AC level actions on adopting new governance paradigms, and strategies for enhanced (technical and financial) support for internal government innovation efforts. Publication of lessons learned to enlighten government officials and the public about the often-invisible internal innovation strategies and impactful solutions in national governments. A comprehensive MOOC (Massive Online Open Course) for government officials with relevant examples and cases. Fostering of closer ties and collaboration among MS/AC (and any other relevant actors) to leverage national capabilities in innovative governance and maintain peer learning through e.g. relevant networks and knowledge exchange platforms. Scope: In an era characterized by numerous concurrent crises, accelerated technological…

Expected Outcome: Projects should contribute to all of the following expected outcomes: EU, national and local policymakers possess the necessary knowledge to inform the development of election regulations, standards and tools that address the use of digital technologies in elections and political campaigns, ensuring their integrity, inclusiveness, accessibility, fairness, transparency, and security. Organisations involved in electoral processes develop and implement guidelines for the responsible use of digital technologies in elections and political campaigns, aligned with EU and national regulations. Enhanced transparency and accountability in AI-powered political campaigns, achieved through requirements for AI system audits, data disclosure, transparency regarding algorithms and sources of Large Language Models (LLMs), and responsible AI development. Scope: The integrity of electoral processes in Europe is facing challenges in the digital age. The digital transformation of democratic processes has created new avenues for citizen engagement, but it also poses significant risks from disinformation to the integrity of electoral and other democratic processes. Concerns about…

Expected Outcome: Projects should contribute to all of the following expected outcomes: Policymakers are made aware and are equipped with the knowledge and tools to integrate inclusive and intersectional perspectives into their policymaking, which strengthens their capacity to promote and protect democracy, fundamental rights, and EU values. Researchers gain insights on how to translate their findings on intersectional inequalities and democracy into actionable, evidence-based recommendations, enabling them to effectively inform policy and practice at local, regional, national, and EU levels. Innovative solutions developed under Horizon Europe and other EU-funding programmes empower equally all citizens, to participate in democratic processes and decision-making. Scope: This call topic aims to establish a Research and Innovation Network for a Union of Equality. The proposed network should bring together academic institutions, public bodies and civil society organisations to collaborate and promote the advancement of inclusive, equal, and resilient democratic societies. The proposed network should contribute to the development of a comprehensive approach to democracy, fostering a…

Expected Outcome: Projects should contribute to all of the following expected outcomes: Greater integration of SSH and STEM [1] research and innovation in R&I initiatives funded at EU level, national and/or regional level, as well as in R&I policies by promoting dialogue, mutual learning and strategic cooperation among research funders and policy makers in the EU. Developing and maintaining a new, common, comprehensive ‘Monitoring and Impact Evaluation Framework’ for SSH integration in current and future EU R&I initiatives. Enhanced facilitation of knowledge exploitation and support to the cooperation between projects and stakeholders, as well as R&I policies involved in projects and other types of cross-border networks dealing with SSH and STEM research and innovation. Scope: As mentioned in the Report ‘Align, Act, Accelerate: Research, Technology and Innovation to boost European Competitiveness’ [2] , European RD&I can provide a new understanding of and solutions to tackle societal challenges. Social sciences and humanities (SSH) and Science, Technology, Engineering and Maths (STEM) improve the research activities, outcomes and impacts of Horizon Europe, because they enable a…

Expected Impact: The European Capital of Innovation Awards aim to champion inspiring cases of municipality-enabled innovation flourishing in cities. The Awards are a prestigious recognition for city administrators who are courageous enough to open up their governance practices to experimentation, to boost innovation by all means, to be a role model for other cities, and to push the boundaries of technology for the benefit of their citizens. In addition to the monetary reward, the prize brings high visibility in the form of renewed public interest and increased media coverage. A European prize to the most innovative cities ecosystems. The award will raise the profile of the cities that have developed and implemented innovative policies; established frameworks that boost breakthrough innovation; enhanced the city attractiveness towards investors, industry, enterprises and talents; helped to open up connections and strengthen links with other cities, promoting the replication of best practices in the innovation field; enhanced citizens’ involvement in the decision-making process; and supported cities resilience. Expected Outcome: The European Capital of Innovation Awards aim to…

Expected Outcome: Project results are expected to contribute to some or all of the following expected outcomes: A community of EU civil security practitioners with common user/functional needs for innovative technology solutions is identified, supported by an industrial base, in particular SMEs and Startups, to access the public procurement market and scale up their business; Procurers facilitated the commercialisation of the innovative solutions developed by their successful suppliers by providing them with first customer references for the validation and first pilot deployment; Tested and validated capacity of EU technology and industrial base to develop and produce technology prototypes that meet the diverse needs of the EU user community, regardless of their gender, age and ability; Improved delineation of the EU market (including demand and supply) for innovative civil security systems that can articulate alternative options for uptake in function of different industrialisation needs, commercialisation needs, acquisition needs, deployment needs and additional funding needs (beyond R&I funding). Scope: As past experience shows that pre-commercial procurement opens up the…

Ireland – Laboratory, optical and precision equipments (excl. glasses) – Supply, delivery, installation Lot 1-300mm Electro-Magneto-Optical Probe Station and Lot 2-Device Parameter analyser for use with 300mm Electro Magneto-Optical Probe stationTyndall National Instit UCC

Germany – Research and development services and related consultancy services – FE 04.0369/2026/BGB - Zeitliche Entwicklung der akustischen Eigenschaften von Walzasphaltdeckschichten unter Verkehrsbelastung

Expected Outcome: Project results are expected to contribute to some or all of the following expected outcomes: Improved trusted, secure, and easier automated seamless facilitation for travel, border crossing through border crossing points (BCPs), and/or visa procedures with an integrated approach, minimized risk for bias, and accessible for all travellers minimising digital divides; Facilitated solutions with same approach adaptable by all European border control staff, in all conditions and border control points (BCPs); Reduced workload and improved safety, user experience and performance of practitioners’ staff involved in border management. Scope: Facilitation of travel and border crossings at border crossing points (BCPs) across the external EU borders went, and is further going, through developments thanks to updated procedures and regulatory frameworks and to innovative European technologies. From automated border control (ABC) gates to “no-gate” solutions and “seamless travel”, and with systems like the Entry-Exit System (EES), the Electronic Travel and Information Authorisation System (ETIAS), and the development of digital travel credentials and digital identity more in…

Expected Outcome: Project results are expected to contribute to some or all of the following expected outcomes: Integrated single-hazard systems into multi-hazard next generation predictive models to assess cascading effects (e.g., heatwave, floods, droughts, landslides, heavy rain) and interactions across meteorological, geophysical, and technological hazards; Enhanced hazard forecasting and response through research on model integration and platform interoperability; Development of holistic risk and resilience metrics to support multi-hazard prevention strategies, encompassing main physical, economic and social effects; Improvement of analysis models considering evolving vulnerability state, due to cascading and cumulative effects, through numerical simulations and experimental tests, possibly also supported by AI applications; Collected reliable data (same granularity and format) and ways to share and analyse it. The interoperability of all kinds of systems and information sharing is crucial, based on the need-to-know principle; Improved knowledge/experience-sharing from past emergencies to cope with future emergencies, also strengthening trans-national knowledge and data…

Expected Outcome: Project results are expected to contribute to some or all of the following outcomes: Improved understanding of systemic vulnerabilities of critical entities including physical, digital, operational, and cross-sectoral dimensions, in the face of compound natural and human-made disaster risks; Verification of existing measures countering potential NaTech risks; Demonstration of advanced technological solutions that enhance the ability of public and private providers of critical services to prepare for, respond to, and recover from complex, multi-hazard scenarios, including cascading or hybrid NaTech events; Deployment of common platforms and operational tools for dynamic risk assessment, decision support, between public authorities, first responders, and critical infrastructure operators during disruptive events; Strengthened multi-level and cross-border cooperation frameworks for integrated emergency and continuity management, ensuring seamless coordination across sectors, governance levels, and jurisdictions. Scope: Recent compound and cascading disasters have demonstrated the urgent need to reinforce the resilience of critical entities against a wide spectrum of…

Expected Outcome: Project results are expected to contribute to some or all of the following outcomes: Identification and analysis of potential new security risks related to innovative technologies being deployed in the urban and peri-urban environments; Innovative and modern tools to identify and measure changes in urban and peri-urban areas caused by the green transition, insofar as they concern security and possible resilience approaches; Verification of measures countering potential safety and security risks, hazards and challenges arising in areas hosting green technologies; Contribution to building awareness and societal acceptance for the safety and security aspects of the green transition; Impacts of incidents involving new and emerging technologies are examined, including environmental and climate risks; Security, safety and resilience aspects of the supply chains of green technologies are analysed, including the technological and resource dependencies, and their aligning with the European strategic autonomy principle; Authorities and critical infrastructure operators are equipped with efficient evaluation methodologies for safe and secure deployment and integration of…

Expected Outcome: Project results are expected to contribute to some or all of the following expected outcomes: Identification and prioritization of climate security scenarios, assessing cascading and compounding risks across multiple sectors; Development and validation of advanced tools, technologies, and data-driven solutions for climate - and environmental - risk forecasting, crisis management, and adaptation, including risk analytical and assessment tools, weather alerts and forecasts; Development and validation of advanced tools and technologies to assess and monitor climate-induced disasters, also providing risk information on adaptation and risk reduction measures; Strengthened engagement with stakeholders, ensuring end-user involvement in defining requirements, testing, and validation of climate security solutions; Development and validation of new risk-management tools, technologies and data, closer to operational environment. Focus on local and regional risk-management and climate adaptation work should be prioritized; Pre-crisis analysis and post-crisis situational awareness in case of those disasters related to climate change (floods, fires, landslides, heat waves,…

Expected Outcome: Project results are expected to contribute to some or all of the following expected outcomes: Police Authorities in Europe are equipped with specialised skills and technologies to counter an increase in illegal activities related to the climate change and the emergence of new (opportunistic) criminal patterns; Improved understanding by policymakers of the effects of climate change on law enforcement with a view of developing related effective European policies; improved knowledge of the impacts of climate change phenomena on social dynamics which can raise demands from public authorities to keep public order, moving beyond traditional perspectives about crime and terrorism. Scope: Global climate change is a megatrend expected to affect our societies over the next decade. As stated in “Germany: National interdisciplinary climate risk assessment” [1] , “We are already living in the climate crisis. This brings substantial security risks at global and national levels. (...) Anyone thinking about security needs to think about climate as well”. Climate change will affect European law enforcement in various ways [2] , [3] . Notably, it is likely to create new…

Expected Outcome: Project results are expected to contribute to all of the following expected outcomes: Increased understanding of European policy makers, research community, biotech companies, and relevant security practitioners of the threat of bioterrorism and of synthetic biology, including a thorough lawful analysis of what needs to be monitored in this context, what needs to be regulated and how; Awareness raised within the related scientific community how research in synthetic biology can be used for malicious purposes. Scope: The rising threat of bioterrorism is driven by recent scientific advancements, notably by growing accessibility of synthetic biology, genetic engineering, related commercial services and public databases, which in turn enhance their obtainability to non-state actors and individuals with malicious intentions. The proliferation of do-it-yourself biohacking and community laboratories, including gene editing and sequencing technology, dropping costs of equipment and increased simplicity of use may inadvertently facilitate knowledge and skills dissemination about biological threats and open new pathways for bioterrorism. Challenges in detection,…

Expected Outcome: Project results are expected to contribute to some or all of the following expected outcomes: Accelerated adoption of high-TRL (Technology Readiness Level) disaster risk solutions across diverse sectors; Facilitated integration of innovative technologies into existing disaster prevention, preparedness, response, and recovery frameworks; Promoted collaboration among stakeholders to scale proven solutions and enhance resilience; Addressed barriers to deployment, ensuring accessibility and usability of advanced DRS technologies; Strengthened evidence-based decision-making through demonstration and validation of high-TRL solutions in real-world scenarios; Promoted visibility of civil security research results. Scope: This topic aims to foster the widespread adoption and integration of high-TRL (Technology Readiness Level) disaster risk solutions (DRS) across multiple sectors, enhancing societal resilience to various hazards, including climate. The focus is on overcoming barriers to deployment, ensuring accessibility, and strengthening collaboration among stakeholders to drive innovation uptake. Projects should promote the adoption of high-TRL solutions by public and…

Expected Outcome: Project results are expected to contribute to some or all of the following expected outcomes: Development of innovative tools and methodologies to monitor and improve risk awareness across society, integrating diverse community perspectives and leveraging advanced technologies; Development and uptake solutions and tools for the successful increase of safety culture and societal resilience of communities with concrete material, while considering also the inclusion and protection of marginalized populations in disaster scenarios; Creation of comprehensive, inclusive preparedness plans that involve all societal sectors and governance levels, ensuring coordinated and effective responses to disasters (such as from early warning to early action), including scarcity of resources; Establishment of a resilient, adaptive response framework that enhances collaboration between public authorities, communities, and private sectors, improving overall disaster resilience. Scope: Building on the whole-of-society and whole-of-government approach, this topic should contribute to enhancing risk awareness and disaster preparedness through the development of innovative tools,…

Germany – Research and development services and related consultancy services – FE 08.0283/2026/BCG - Einfluss verschiedener AKR-Prüfzementchargen auf die statistische Verteilung von Dehnungen im Schnellprüfverfahren mit verschiedenen Gesteinskörnun-gen

Expected Outcome: Project results are expected to contribute to some or all of the following expected outcomes: Last mile support to previous pre-commercial procurement (PCP) actions; Development and deployment of innovative security solutions to address emerging threats, including post-quantum cryptography to counter emerging quantum threats, improving the effectiveness and efficiency of public security services; Implementation of pilot projects and real-world testing, ensuring scalability and contributing to innovative security technologies. Scope: This Public Procurement of Innovative Solutions (PPI) initiative aims to advance the adoption of innovative civil security solutions. The focus is on solutions that have been partially demonstrated on a small scale and are nearly or already available in small quantities but have not yet been widely adopted or produced at scale. These solutions should demonstrate a clear market potential and be new to the procurers, their market segment, or the internal EU market, and must be relevant to procurers across EU Member States and/or Associated Countries. This PPI will specifically target innovative solutions that can address critical…

Expected Outcome: Project results are expected to contribute to all of the following expected outcomes: Demonstrated approaches aligned with NEB allow architects, designers, spatial planners and neighbourhood [1] decision makers to ensure an efficient and effective integration of user perspectives in the spatial design and/or transformation of public spaces. The demonstrated approaches deliver positive climate, environmental, social and cultural impact (such as addressing inequalities and enhancing social cohesion, community [1] resilience, civic engagement and a sense of security, ownership and belonging). Scope: The design of neighbourhood public spaces defines their functionality, but also other aspects such as power dynamics and sense of belonging. A fair green transition [1] calls for neighbourhood public spaces to be designed and managed for diverse users. Integrating new methods (such as research-by-design, security-by-design [4] , or life-centric design) in the architectural design and spatial planning of public space can help reflect on the values, practices and stakeholder relations that underpin the design of public spaces; rethink how public spaces are understood;…

Funding is available to purchase a die attach/bonding system capable of performing a wide range of bonding processes, including ultrasonic, flip-chip, and UV curing, which is suitable for prototyping and light production runs. As a result, a crucial aspect for any die attach system under is the ability to be used for bonding runs as small as a single die should this be required. This stipulation lends itself to a semi-automated (i.e. motorised) system, ideally with the capacity to store process recipes to maximise reproducibility should the system be used for light production runs.

Expected Outcome: Project results are expected to contribute to some or all of the following expected outcomes: Improved preparedness, evidence-based approaches and response capabilities, along with a strengthened ability to mitigate risks from diverse threats, by integrating validated disruptive technologies into real-world operations; Accelerated adoption of innovative solutions by reducing barriers through rigorous testing and validation, fostering collaboration among public authorities, industry, and researchers to align technologies with real-world needs. Scope: This topic aims to support the integration of disruptive technological innovations [1] into civil security by strengthening research and innovation activities that enhance preparedness, response capabilities, and risk mitigation. A key focus is bridging the gap between early-stage, low Technology Readiness Level (TRL) research and applied security solutions, ensuring that emerging technologies are effectively transitioned into operational use. Proposals should prioritize disruptive solutions that address diverse security threats while improving the efficiency and effectiveness of civil security operations. Emphasis…

Provision of Local Accelerator Delivery Services for the Innovation and Technology Fund (ITF), Low Carbon Development Initiative (LCDI) Phase 2 Oxford Policy Management Limited (OPML), with support from the Foreign, Commonwealth and Development Office (FCDO) and Kementerian PPN/BAPPENAS, invites potential suppliers to submit a proposal to act as the local Accelerator Delivery Partner for the ITF Accelerator Programme, providing a locally-based Acceleration Manager and associated technical assistance to grantees funded under the ITF. The overall objective of this assignment is to strengthen the commercial, operational and institutional readiness of ITF grantees through tailored, high-quality technical assistance, delivered fairly and consistently across a diverse cohort. The assignment covers all eight ITF grantees selected under Batch 1 and Batch 2 and includes delivery of a shared in-country bootcamp, individual needs assessments and site visits, and tailored one-to-one accelerator support through to March 2027. It is the responsibility of the tenderer to ensure that proposals are received by 22nd July at 23:00 Indonesia Western Time. Proposals received after this time will not be considered. Any questions or requests for clarification and the Technical and financial proposals should be sent by email to a5043procurement@opml.co.uk within the timescales set out in Section 14. The financial proposals should be send in a separate email in excel file with password protected.

Society’s most important advances have stemmed from those willing to think differently about what might be possible. ARIA is an R&D funding agency built to unlock scientific and technological breakthroughs that benefit everyone. Created by an Act of Parliament, and sponsored by the Department for Science, Innovation, and Technology, ARIA funds breakthrough R&D in under explored areas to catalyse new paths to prosperity for the UK and the world.

Expected Outcome: This action will establish a strategic European initiative to develop scalable, modular, and interoperable photonic quantum computing platforms. Proposals for this topic are expected to address and provide credible solutions to at least two major technical roadblocks currently limiting the advancement of photonic quantum computing such as: The lack of deterministic, high-efficiency photonic entanglement and loss-tolerant architectures suitable for fault-tolerant scaling The absence of a standardised, integrated control stack combining photonic hardware, firmware, and system software with reliable benchmarking across platforms Project results are expected to contribute to the following expected outcomes: By 2028, demonstration of a photonic NISQ processor with ≥100 photonic qubits, integrating deterministic single-photon sources, low-loss waveguides, on-chip detectors, and a firmware stack (scheduler, controller, compiler), validated via hardware-agnostic benchmarks and hybrid photonic-HPC applications demonstrating classical-quantum crossover By 2030, delivery of a full-stack, high-connectivity photonic quantum computer, with modular scalability, integrated…

Funding is available to purchase a laser-based photonic component testing system which is capable of rapidly modifying the wavelength (>100 nm/s sweep rate) with a high level of precision (sub-picometer wavelength resolution). Such a system must also be able to accurately measure the wavelength-dependent power to allow for characterisation of a device under test (DUT). Such a system would strongly complement the photonics capabilities available to the QTIC/BIZ community.

Apply for Arts and Humanities Research Council (AHRC) standard research grant funding to support well-defined collaborative projects across the arts and humanities, in areas covered by our remit. You must be based at a UK research organisation eligible for AHRC funding. There is no limit on the value of the grant, the value specified within the summary page is an example.

Apply for funding to work with overseas researchers in Luxembourg. Submit a collaborative research grant application within the remit of Arts and Humanities Research Council (AHRC) and Fonds National de la Recherche (FNR). You must be based at a UK research organisation eligible for AHRC funding. There is no limit on the value of the grant, the value specified within the summary page is an example.

Apply for funding to work with overseas researchers in the Unites States (US). Submit a collaborative research grant application within the remit of AHRC and US National Science Foundation, Social, Behavioural and Economic Sciences Directorate (NSF-SBE). You must be based at a UK research organisation eligible for AHRC funding. There is no limit on the value of the grant, the value specified within the summary page is an example.

Apply for funding to work with overseas researchers in the State of São Paulo, Brazil. Submit a collaborative research grant application within the remit of Arts and Humanities Research Council (AHRC) and State of São Paulo Research Foundation (FAPESP). You must be based at a UK research organisation eligible for AHRC funding. There is no limit on the value of the grant, the value specified within the summary page is an example.

Apply for funding to pursue an adventurous, ambitious, curiosity-driven project in environmental research. You must be: • based at a UK research organisation eligible for Natural Environment Research Council (NERC) funding • in a role that meets the individual eligibility requirements There is no limit on the value of the grant, the value specified within the summary page is an example.

Apply for funding for ship borne and virtual site survey investigations (SSI) to support the development of applications for a scientific ocean drilling expedition. You must be based at a UK research organisation eligible for NERC funding.

AHRC awards to support researchers without prior experience of leading a significant research project to accelerate their trajectory as independent researchers, to unlock their potential and build leadership and convenor experience. You must be based at a UK research organisation eligible for AHRC funding. There is no limit on the value of the grant, the value specified within the summary page is an example.

Flexible awards to fund fundamental research that leads to new research agendas, networking activity and idea generation, which enables the development of further research opportunities and new research agendas. There is no limit on the value of the grant, the value specified within the summary page is an example.

Spain – Contamination-monitoring devices – Suministros y servicios integrales necesarios para la implantación y gestión de los sistemas de monitorización de calidad del aire y el ruido de la zona de bajas emisiones Ourense Centro

The Cyberinfrastructure for Public Access and Open Science (CI PAOS) program within the Office of Advanced Cyberinfrastructure (OAC) aims to catalyze new and transformative socio-technical partnerships supporting research data infrastructure ecosystems across d omains through early-stage collaborative activities between cyberinfrastructure researchers, scie ntists , research computing experts, data management experts , research labs , university libraries , and other communities of practice. The CI PAOS program supports the NSF Public Access Initiative by encouraging innovation across the CI ecosystem t o address accessibility, discoverability, reliability, reproducibility, sustainability, and utility of data products in alignment with NSF and national goals for public access and open science [ See: NSF Public Access Initiative , Office of Science and Technology Policy Memorandum on Ensuring Free, Immediate, and equitable Access to Federally funded Research , and Desirable Characteristics of Data Repositories for Federally Funded Research ] . CI PAOS builds on previous investments including those through Dear Colleague Letters NSF 19-069 , NSF 20 -068 , NSF 23-018 , and the FAIROS R esearch C oordination N etworks ( RCN ) p rogram solicitation ( NSF 22-553 ) . NSF accepts proposals pursuant to this Program Description year-round. From time to time , NSF may also issue Dear Colleague Letters to encourage proposals on special thema tic interests and opportunities related to this progra m . GUIDANCE TO POTENTIAL PROPOSERS A primary feature of successful CI PAOS projects is a robust, synergistic collaborative team comprising skills from across communities of science/engineering, research data science, and information science discipline(s) and expertise in leveraging connections between cyberinfrastructure researchers and providers and data specialists . Leveraging international collaboration to build shared norms and address c hallenges related to developing and implementing PAOS policies and practices is encouraged . Research and education in science and engineering benefit immensely from international cooperation. P roposals with an international component are also welcome [See: International Collaborations Opportunities at NSF ] . Proposers must target one or more of th e following themes/pathways: Competency Building, Capability Building, and /or Community Building. Competency Building Open s cience /engineering-driven collaboration . A socio -technical collaborative approach in addressing disciplinary , interdisciplinary , domestic, and international data lifecycle challenges is critical to informing and guiding the development of principles, requirements , and standards of a CI ecosystem that fosters pipelines to good data management and pathways to access. Propos al s should clearly describe the goals, challenges, and rationale for the proposed data science and engineering project and include an explanation of the potential for transformative research and broader impacts on the open science ecosystem [ See: U.S. NSF Broader Impacts ] . Successful proposals will also clearly identify utilization science scenarios and use cases . C apability Building Exploratory and pilot activities. <span class="TextRun SCXW92189242 BCX4" lang="EN-US" xml:lang="EN-US" d

The Biomechanics and Mechanobiology (BMMB) program is part of the Mechanics of Materials cluster within the Division of Civil, Mechanical, and Manufacturing Innovation. The BMMB program supports fundamental and transformative research that advances our understanding of engineering biomechanics and/or mechanobiology. The program emphasizes the study of biological mechanics across multiple domains, from sub-cellular to whole organism. Distinct from conventional engineering materials, the program encourages the consideration of diverse living tissues as smart materials that are self-designing. BMMB projects must have a clear biological component, a clear mechanics component, and must improve our understanding of the mechanical behavior of a living system. Investigations of the mechanical behavior of biological molecules, cells, tissues, and living systems are welcome. An important concern is the influence of in vivo mechanical forces on cell and matrix biology in the histomorphogenesis, maintenance, regeneration, repair, and aging of tissues and organs. The program is also interested in efforts to translate recent biomechanical and mechanobiological discoveries into engineering science. Multiscale mechanics approaches are encouraged but not required. Projects may include theoretical, computational, or experimental approaches, or a combination thereof. NSF does not support clinical trials; however, feasibility studies involving human volunteers or animal subjects may be supported if appropriate to the scientific objectives of the project. Proposals should address the novelty and/or potentially transformative nature of the proposed work compared to previous work in the field. Also, it is essential to address why the proposed work is important in terms of engineering science, and to state the potential impact of success in the research on society and/or industry. Innovative proposals outside of these specific areas of biomechanics and mechanobiology will be considered. However, prior to submission of particularly unique topics, it is strongly recommended that Principal Investigators (PIs) contact the program director to discuss how the proposed work fits within the scope of the program and avoid the possibility of the proposal being returned without review. Related programs also fund certain aspects of biomechanics and mechanobiology research, and PIs are encouraged to examine these to find the appropriate program for submission. Proposals with a heavy emphasis on tissue engineering or developing validated models of tissue and organ systems should consider the Engineering of Biomedical Systems (EBMS) program.Projects addressing biological questions about the physiological mechanisms and structural features of organisms should consult the Physiological Mechanisms &amp; Biomechanics (PMB) program.Projects elucidating aspects of neural control may consider the Perception, Action, &amp; Cognition (PAC) program or the Mind, Machine, and Motor Nexus (M3X) program if the project contains work relevant to human-machine interaction. Projects in rehabilitation engineering should consider the Disability and Rehabilitation Engineering (DARE) program. Projects focused on fundamental research related to design, characterization, and modification of biomaterials should consider the Biomaterials (BMAT) program. Manufacturing systems proposals should consider the Advanced Manufacturing (AM) program. Work on the interplay between structure, dynamics, and function of biomolecules without advancing our understanding of the mechanics of a living system should consider the Molecular Biophysics program. Researchers who believe their work may span multiple programs are particularly encouraged to contact the cognizant program directors well in advance of submission. The duration of unsolicited proposal awards is generally up to three years; proposals for a shorter duration are welcome. Single-investigator award budgets typically include support for one graduate student (or equivalent trainee) and up to one month of PI time per year (awards for multiple investigator projects are typically larger). Proposal budgets or durations that are much larger than typical should be discussed with the program director prior to submission. Proposers can view budget amounts and other information from recent awards made by this program via the &ldquo;What Has Been Funded (Recent Awards Made Through This Program, with Abstracts)&rdquo; link towards the bottom of this page.

This award is for BBSRC-funded research groups to pump-prime interactions with FAPESP scientists in Brazil. Applications must be made by a project lead who is currently in receipt of BBSRC research funding. There is no limit on the value of the grant, the value specified within the summary page is an example.

Provision of support and maintenance services

Supply of drug wipes

The objective of this Agreement is to advance historic preservation at the local level by establishing a task agreement between the National Park Service and the National Alliance of Preservation Commissions (NAPC) to provide training opportunities, promote the Federal Certified Local Government program, and strengthen local preservation commissions by providing bi-annual State Certified Local Government Coordinator Training

Latvia – Laboratory, optical and precision equipments (excl. glasses) – Pētniecības un apmācības aprīkojums (4.kārta)

Laboratory Equipment

Specialised Diagnostic Scientific Laboratory Equipment

Supply of robotic workstations

Supply of scientific equipment

Inventory Spares

Provision of laboratory supplies

Supply and installation of laboratory and scientific equipment

Procurement of a UV-Vis Spectrophotometer for the Analytical Services Branch of the National Measurement Institute.

Testing Instruments

Scientific Equipment Service Agreement and Consumables

Procurement of a pressure transducer for the Physical Metrology Branch of the National Measurement Institute.

Procurement of a software upgrade for the Analytical Services Branch of the National Measurement Institute.

Water level monitoring units

Measuring Equipment

The Probability Program supports research on the theory and applications of probability. Subfields include discrete probability, stochastic processes, limit theory, interacting particle systems, stochastic differential and partial differential equations, and Markov processes. Research in probability which involves applications to other areas of science and engineering is especially encouraged. Conferences Principal Investigators should carefully read the program solicitation &quot;Conferences and Workshops in the Mathematical Sciences&quot; (link below) to obtain important information regarding the substance of proposals for conferences, workshops, summer/winter schools, and similar activities. Conference and workshop proposals should be submitted eight months before the requested start date.

The Combinatorics program supports research on discrete structures and includes algebraic, enumerative, existential, extremal, geometric, and probabilistic combinatorics, including graph theory. Conferences Principal Investigators should carefully read the program solicitation &quot;Conferences and Workshops in the Mathematical Sciences&quot; (link below) to obtain important information regarding the substance of proposals for conferences, workshops, summer/winter schools, and similar activities. Conference proposals must be submitted at least six months in advance of the conference, and in the same fiscal year (which begins October 1) if possible.

The program in Foundations supports research in mathematical logic and the foundations of mathematics, including proof theory, recursion theory, model theory, set theory, and infinitary combinatorics. Conferences Principal Investigators should carefully read the program solicitation &quot;Conferences and Workshops in the Mathematical Sciences&quot; (link below) to obtain important information regarding the substance of proposals for conferences, workshops, summer/winter schools, and similar activities. Conference and workshop proposals should be submitted eight months before the requested start date.

The Analysis Program supports research in analysis. Areas of current activity include complex, harmonic, and real analysis; dynamical systems and ergodic theory; functional analysis; mathematical physics; operator theory and operator algebras; partial differential equations and calculus of variations. Conferences Proposals to the Analysis Program for conferences or workshops must be submitted through the program solicitation "Conferences and Workshops in the Mathematical Sciences" (link below). Principal Investigators should carefully read the solicitation to obtain important information regarding the substance of proposals for conferences, workshops, and similar activities. To facilitate timely notification of the availability of support, proposals for conferences, workshops, and similar activities should be submitted 8 months in advance of the start date of the proposed event.

The Algebra and Number Theory program supports research in algebra, algebraic and arithmetic geometry, number theory, and representation theory. Conference proposals The Algebra and Number Theory program also provides support for conferences, workshops, summer/winter schools, and similar activities. Proposals should be submitted to PD 20-1264 using the "Conference" proposal type in research.gov. Proposals with budgets not exceeding $50,000, which in accordance with NSF policy can be reviewed internally, should be submitted: in May for events that will take place in January through April of the following year in October for events that will take place in May through December of the following year. In order to allow time for external review, proposals with budget requests exceeding $50,000 should be submitted nine to twelve months before the event is scheduled to take place.

Germany – Research and development services and related consultancy services – Lösungsumsetzung der SET Inno Tandems

Expected Impact: Each proposal must include an assessment of the expected industrial, economic, social and environmental benefits (Article 26 of Council Decision 2008/376/EC). Objective: Proposals submitted under this topic should relate to one or more of the RFCS objectives for coal as set out in Council Decision 2008/376/EC . Scope: Pilot projects target the construction, operation and development of installations on an appropriate scale. Demonstration projects cover the construction and/or operation of industrial-scale installations.Both pilot and demonstration projects aim to bridge the gap between research and innovation. Pilot and demonstration activities are expected to start at TRL 4-5 and achieve TRL 7-8 by the end of the project.

Expected Impact: Each proposal must include an assessment of the expected industrial, economic, social and environmental benefits (Article 26 of Council Decision 2008/376/EC). Objective: Proposals submitted under this topic should relate to one or more of the RFCS objectives for steel as set out in Council Decision 2008/376/EC . Scope: Pilot projects target the construction, operation and development of installations on an appropriate scale. Demonstration projects cover the construction and/or operation of industrial-scale installations. Both pilot and demonstration projects aim to bridge the gap between research and innovation and commercialisation. Pilot and demonstration activities are expected to start at TRL 4-5 and achieve TRL 7-8 by the end of the project.

Expected Impact: Accompanying measures are expected to ensure a balanced representation, within the consortium, of relevant academia, research centres, industry and/or industry associations, including just transition actors. They should also involve stakeholders required for the just transition of coal regions. In addition, accompanying measures may provide suggestions for policy initiatives that contribute to the digital, green and circular transformation of the coal communities, in line with the European Green Deal. Objective: Proposals submitted under this topic should relate to one or more of the RFCS objectives for coal, as set out in Council Decision 2008/376/EC . Scope: Accompanying measures aim to promote the use of knowledge gained or the organisation of dedicated workshops or conferences in connection with projects or priorities of the RFCS.

Expected Impact: Each proposal must include an assessment of the expected industrial, economic, social and environmental benefits (Article 26 of Council Decision 2008/376/EC). Objective: Proposals presented under this topic should relate to one or more of the RFCS objectives for coal as set out in Council Decision 2008/376/EC . Scope: Research projects focus on investigative or experimental work aiming to acquire knowledge to facilitate the attainment of specific practical objectives.Research project activities are expected to start at technology readiness level (TRL) 1-3 and achieve TRL 4-5 by the end of the project.

Expected Impact: Accompanying measures are expected to ensure balanced representation, within the consortium, of relevant academia, research centres, industry and/or industry associations, including just transition actors. They should also involve stakeholders required for the just transition of the steel industry. In addition, accompanying measures may provide suggestions for policy initiatives that contribute to the digital, green and circular transformation of steel communities, in line with the European Green Deal. Objective: Proposals submitted under this topic should relate to one or more of the RFCS objectives for steel as set out in Council Decision 2008/376/EC . Scope: Accompanying measures aim to promote the use of knowledge gained or the organisation of dedicated workshops or conferences in connection with projects or priorities of the RFCS.

The Mathematical Biology Program supports research in all areas of mathematical sciences with relevance to the biological sciences. Successful proposals must demonstrate mathematical innovation, biological relevance and significance, and strong integration between mathematics and biology. Some projects of interest to the Mathematical Biology Program may include development of mathematical theories, methodologies, and tools traditionally seen in other disciplinary programs within the Division of Mathematical Sciences. In general, if a proposal is appropriate for review by more than one NSF program, it is advisable to contact the program officers handling each program to determine when and where the proposal should be submitted and to facilitate the review process. The Mathematical Biology Program regularly seeks joint reviews of proposals with programs in the Directorates of Biological Sciences and other relevant programs. Investigators are encouraged to discuss their project with program officers in relevant areas to determine whether it could be considered by more than one program. Research in Undergraduate Institutions (RUI) Investigators submitting an RUI proposal should read the RUI solicitation (link below), as the rules for proposal format may deviate from the Proposal &amp; Award Policies &amp; Procedures Guide (PAPPG). EAGER and RAPID Proposals Prior to submitting proposals for EArly-concept Grants for Exploratory Research (EAGER) or Rapid Response Research (RAPID), Investigators must contact the cognizant program directors. Requests for Award Supplements Principal Investigatorsare encouraged to contact the cognizant program director prior to submission of a proposal for an award supplement. See the PAPPG for more information. Conferences Investigators should carefully read the program solicitation, "Conferences and Workshops in the Mathematical Sciences," (link below) to obtain important information regarding the substance of proposals for conferences, workshops, summer/winter schools, and similar activities. To facilitate timely notification of the availability of support: proposals for conferences, workshops, etc., to be held in the US must be submitted 8 months in advance of the conference date; proposals to support group travel to meetings outside the US must be submitted 12 months in advance of the meeting date.

Expected Impact: Each proposal must include an assessment of the expected industrial, economic, social and environmental benefits (Article 26 of Council Decision 2008/376/EC). Objective: Proposals submitted under this topic should relate to one or more of the RFCS objectives for steel as set out in Council Decision 2008/376/EC . Scope: Research projects focus on investigative or experimental work aiming to acquire knowledge to facilitate the attainment of specific practical objectives. Research project activities are expected to start at TRL 1-3 and achieve TRL 4-5 by the end of the project.

Expected Outcome: Objectives and profile of the ERC Advanced Grant Principal Investigator The objective of the Advanced Grant is to support excellent Principal Investigators that are established research leaders. An ERC Advanced Grant Principal Investigator is expected to be an active researcher with a track record of significant research achievements. Size of ERC Advanced Grants Advanced Grants may be awarded up to a maximum of EUR 2 500 000 for a period of 5 years . The maximum amount of the grants is reduced pro rata temporis for projects of a shorter duration. Additional funding up to EUR 1 000 000 * can be requested to cover further eligible costs (e.g. start-up costs, major equipment, access to large facilities, major experimental and field work costs) when these are necessary to carry out the proposed work. The requests for additional funding must be duly justified in the proposal. Additional funding is not subject to pro rata temporis reduction for projects of shorter duration. * Except for Principal Investigators in Starting, Consolidator, or Advanced Grant re-locating to the EU or an Associated Country from elsewhere to take up their ERC grant. In this case, the maximum…

Specific Challenge: The “EU Award for Gender Equality Champions” is a recognition prize scheme designed as a booster and a complement to the Gender Equality Plans (GEP) eligibility criterion in Horizon Europe [1] , and as a tool for advancing inclusive GEPs and policies within the framework of the ERA Policy Agenda. Expected Outcomes : Recognition of organisations with the most significant impact resulting from the implementation of their GEP, serving as role models for others; Strengthened gender equality and inclusiveness in the European Research Area. The Prize will be awarded to four organisations, and contestants can apply to one of the following three prize categories: Sustainable Gender Equality Champions: Organisations that can demonstrate a significant and sustained record of activity and a high level of achievement through the implementation of their GEP(s); Newcomer Gender Equality Champions: Organisations without a sustained record of activity in gender equality that have recently completed the implementation of their first GEP and can demonstrate the most progress achieved through its implementation; Inclusive Gender Equality Champions: Organisations that have…

Latvia – Water meters – “Ūdens patēriņa skaitītāju piegāde SIA “Ādažu ūdens” vajadzībām”

Latvia – Research and development services and related consultancy services – Radīto pārtikas atkritumu mērījumu īstenošana katram pārtikas piegādes posmam 2027. gadā.

Germany – Research and experimental development services – Kultivierung und Prozessierung einer Ölhefe

Poland – Research and development services and related consultancy services – Świadczenie usługi doradczej w zakresie budowy i optymalizacji modeli danych oraz narzędzi do wizualizacji danych i prezentacji treści

Specific Challenge: The “EU Award for Gender Equality Champions” is a recognition prize scheme designed as a booster and a complement to the Gender Equality Plans (GEP) eligibility criterion in Horizon Europe [1] , and as a tool for advancing inclusive GEPs and policies within the framework of the ERA Policy Agenda. Expected Outcomes : Recognition of organisations with the most significant impact resulting from the implementation of their GEP, serving as role models for others; Strengthened gender equality and inclusiveness in the European Research Area. The Prize will be awarded to four organisations, and contestants can apply to one of the following three prize categories: Sustainable Gender Equality Champions: Organisations that can demonstrate a significant and sustained record of activity and a high level of achievement through the implementation of their GEP(s); Newcomer Gender Equality Champions: Organisations without a sustained record of activity in gender equality that have recently completed the implementation of their first GEP and can demonstrate the most progress achieved through its implementation; Inclusive Gender Equality Champions: Organisations that have…

Specific Challenge: The “EU Award for Gender Equality Champions” is a recognition prize scheme designed as a booster and a complement to the Gender Equality Plans (GEP) eligibility criterion in Horizon Europe [1] , and as a tool for advancing inclusive GEPs and policies within the framework of the ERA Policy Agenda. Expected Outcomes : Recognition of organisations with the most significant impact resulting from the implementation of their GEP, serving as role models for others; Strengthened gender equality and inclusiveness in the European Research Area. The Prize will be awarded to four organisations, and contestants can apply to one of the following three prize categories: Sustainable Gender Equality Champions: Organisations that can demonstrate a significant and sustained record of activity and a high level of achievement through the implementation of their GEP(s); Newcomer Gender Equality Champions: Organisations without a sustained record of activity in gender equality that have recently completed the implementation of their first GEP and can demonstrate the most progress achieved through its implementation; Inclusive Gender Equality Champions: Organisations that have…

Tianshui Dadiwan: Scenic area exhibition equipment, lighting and sound equipment, intelligent systems and Scenic area vehicles.

Objective: The objective of this call is to modernise maritime transport infrastructure on the TEN-T network and reducing the environmental impact of transport through efficient short sea shipping links and greening of inland shipping. Scope: Only works projects related to: Projects supporting the deployment of Onshore-power supply and charging infrastructure in TEN-T maritime and inland ports in accordance with Regulation 2023/1804 [1]. The fitting or retrofitting of the energy systems of inland waterway vessels and short sea shipping vessels (including ferries) [2], with electric, hybrid, H2, ammonia, methanol and biomethane technologies, substitute sources of energy [3] and the installation of wind assisted propulsion systems (WAPS). For projects supporting the deployment of Onshore-power supply and charging infrastructure in TEN-T maritime and inland ports: Projects may include Onshore-power supply systems and Shore-side Battery Charging (SBC) systems at port-side. These systems shall be intended for seagoing freight/passenger vessels (including tugboats and cruise vessels) and inland waterway vessels. Projects may include an upgrade of electrical grid within the maritime and…

Objective: The objective of this call is to modernise transport infrastructure and enhance the digitalisation of road transport on the TEN-T network. Scope: Works related to: Projects fostering the deployment of new technologies and innovation by supporting test-beds / infrastructure for autonomous vehicles [1]. The focus will be specifically on investments in infrastructure for commercial (pre-) deployment of autonomous vehicles, implementing sufficiently mature technology that do not include Research & Innovation activities. The projects to be financed shall contribute to the deployment of highly automated vehicles on the road for real operation, requiring investment in infrastructure to ensure the efficient operation of autonomous vehicles, in two areas: Establishing control centers (IT equipment for remote supervision of highly automated vehicles, offering support in challenging or unexpected situations). Support is not provided to the construction of actual buildings (such as TMC building). Deploying digital infrastructure for accurate vehicle positioning and communication with the surrounding environment (including interaction with emergency services). Particular attention…

Construction of Multi-commodity pack house, Vapour Heat Treatment (VHT) unit with integrated Pack house and Irradiation Unit & scientific cold storage facilities at Bapgaon (Thane)

Procurement of ICT equipment devices and assistive technologies for containerized digital learning hubs and the House of Parliament. They include laptops 226, Digital Scanners 5, Tablets 150, Virtual Meeting Cameras 2, printers 16, NVDA software 32, etc..

Virtual fence technology cattle collar system. The system will be deployed in upland and semi-upland conditions with variable terrain, vegetation density, and intermittent mobile network coverage. To access this competition: Registered: Login to https://suppliers.multiquote.com and view the opportunity CA18163. Not registered: Visit https://suppliers.multiquote.com then register and quote CA18163 as the reason for registration. Any queries please contact MultiQuote on 020 3920 8054.

Consultancy Services for Assessing the Impact of the Uptake of Productive Uses of Energy (PUE) Technologies on Beneficiary Enterprises Under Electricity Access Scale-Up Project (EASP)

Consultancy Services for Market Analysis on the Emerging Productive Uses of Energy (PUE) Technologies in Uganda

Procurement Specialist

Consultancy Services: Independent Technical Assurance (ITA)

Selection of Individual Consultant for Technology Governance

The U.S. Army Research Office (ARO) in partnership with NSA’s Laboratory for Physical Science (LPS) is soliciting Incubator, Collaboration, and Fellowship research proposals for participation in the LPS Qubit Collaboratory (LQC). The mission of the LQC can be captured in three broad goals: 1) pursue disruptive fundamental research and enabling technologies with a focus on qubit development for quantum computing and other applications (such as sensing); 2) grow deep, collaborative partnerships to tackle the most difficult and relevant long-term problems in quantum information science and technology; and 3) build a quantum workforce of tomorrow through research experiences in government at LPS and at LQC partners. The LQC will offer a mechanism for collaborative research between LPS and academia, industry, FFRDCs, and Government Laboratories to advance foundational and transformative research on challenging problems that have hindered progress in quantum information processing and associated technologies. The goal of this BAA is to seek proposals that bring together expertise from the public and private sectors and their respective research infrastructures to advance solutions that may be best approached as a collaborative team. A Collaboratory is “a center without walls, in which the nation’s researchers can perform their research without regard to physical location, interacting with colleagues, accessing instrumentation, sharing data and computational resources, [and] accessing information in&nbsp;digital libraries.&nbsp;This BAA introduces LQC Research Thrusts ( A.1.1 ) which are the technical areas of interest—which will be updated periodically—where partners of the LQC will pursue joint research with LPS through Incubator ( A.1.2 ) and Collaboration ( A.1.3 ) collaborative agreements. The LQC BAA also fulfills the Government’s overarching interest--through the proposed research and on-site research experiences--in creating and training a workforce in quantum science and technology, generating pathways of solutions that feed technology development, establishing partnerships, and creating transition opportunities. In further support of training through research, Section A.1.4 calls for Quantum Computing Research (QuaCR) Graduate and Postdoctoral Fellowships for US citizens working in areas of interest. Substantial progress on solving the most difficult and long-term Quantum Information Science &amp; Technology (QIST) research problems that unleash further rapid progress in the field will constitute LQC success.&nbsp;Examples of such research problems include (but are not limited to): limits of performance due to device design, material selection, and/or control, the exploration of alternative qubit physics (e.g., different approaches to qubit encoding or types of gates) and lowering of barriers to such approaches, advances in materials that improve qubit gate fidelity, reducing the overhead of classical components in quantum information technology and optimizing classical performance, and the exploration of applications of quantum technologies to new domains. Three categories of proposals are sought for this BAA: 1.Incubator opportunities seek partnership proposals from single investigators and small research groups, including teaching colleges, who may have unique skillsets to contribute toward the pursuit of the research thrusts presented in A.1.1.&nbsp;Incubator proposals may also be the development of concepts into a detailed technical research approach to advance solution of problems of high interest to quantum information science research.&nbsp;Incubator proposals would avail themselves of the collaboration opportunities with LPS research staff and infrastructure made available at the Laboratory for Physical Sciences (LPS) to lay the groundwork for concepts that may be suitable for a Collaboratory proposal or responses to other DoD quantum information science research opportunities. 2.Collaboratory proposals seek research proposals that bring together a strong significant collaboration--researchers from academia, industry, FFRDCs, and/or Government Laboratories--to pursue long-term projects focused on fundamental problems of interest to qubit development and/or associated science and technology.&nbsp;These collaborative groups will propose to work together in a focused manner for a period of time expected to be one to three years in order to demonstrate a proof-of-concept experiment and/or theory exploration to determine the feasibility of their creative idea. 3.QuaCR Research Fellowship proposals seek to support talented U.S. citizen graduate students and postdoctoral researchers in the field of quantum information processing (primary interest) and quantum sensing (secondary interest). Applicants with a background from either within or outside QIS are encouraged. The proposed research areas are described in this BAA and must enhance active Quantum Information Science research efforts being supported by the Army Research Office and/or LPS. Research fellows are encouraged to complete an LPS Internship during their graduate career or visit during their postdoctoral fellowship. Funding Opportunity Title: LPS Qubit Collaboratory Special Research Topics Announcement: W911NF21S0009-SPECIALNOTICE-1 The U.S. Army Combat Capabilities Development Command (DEVCOM), Army Research Laboratory (ARL)-Army Research Office (ARO) is looking for proposed research and development solutions under the Broad Agency Announcement (BAA) W911NF21S0009-2 for Basic and Applied Scientific Research in Quantum Computing. The title for this Special Notice is “LPS Qubit Collaboratory Special Topics.” Upon receipt, compliant proposals will be reviewed through a technical and programmatic process in accordance with the evaluation criteria referenced in the W911NF21S0009-2 LQC BAA to determine which proposal may be awarded Grant, Cooperative Agreement, or Procurement Contract under this topic.

The Air Force Research Laboratory, Human Effectiveness Directorate (AFRL/RH) and the United States Air Force School of Medicine (USAFSAM) CHEERS Multiple Authority Announcement (MAA) is intended to provide a comprehensive strategy for AFRL/RH and USAFSAM's range of Science and Technology (S&amp;T) requirements, allowing for progression from basic research to technology maturation and transition. 20 Nov 2025: Amendment 01 - Annual Update The CHEERS Multiple Authority Announcement (MAA) MUST be reviewed in tandem with the solicitations in order to have access to all applicable attachments and instructions.&nbsp;There are three (3) open, 2-step, solicitations currently accepting white papers. Please see below for solicitation numbers. Multiple Authority Announcement (MAA), Notice FA238424S2233:&nbsp; 1. CHEERS MAA Open Period 1 – Broad Agency Announcement (BAA), Solicitation FA238424S2334 &nbsp; 2. CHEERS MAA Open Period 2 – Procurement for Experimental Purposes (ARA), Solicitation FA238424S2335&nbsp; &nbsp; 3.&nbsp;CHEERS MAA Open Period 3 - Commercial Solutions Opening (CSO), Solicitation FA238424S2336&nbsp;(NOTE: THIS CSO IS NOT GRANT-ELIGIBLE) Please reach out if you have any questions regarding the MAA and/or the solicitation(s). Technical questions may be directed to the technical POC’s identified in the announcement/solicitations. General questions may be directed to the CHEERS email org box: AFRL.711HPW.MAA@us.af.mil

Pioneering Aerospace Capabilities, Engineering and Research (PACER)

The Air Force Research Laboratory, Human Effectiveness Directorate (RH) and the United States Air Force School of Aerospace Medicine (USAFSAM), is soliciting white papers (and potentially later technical and cost proposals) on the research located in the Statements of Objectives attached to the Continuing Human Enabling, Enhancing, Restoring and Sustaining (CHEERS) Multiple Authority Announcement (MAA) Opportunity FA2384-24-S-2233. List of Attachments: 1. "Open Period Solicitation 1_BAA Amend 01" 2. "Attachment 1 - List of Provisions and Clauses (BAA)" Related Notice: Multiple Authority Announcement (MAA) FA238424S2233, "Continuing Human Enabling, Enhancing, Restoring and Sustaining (CHEERS)" Note: You MUST refer to the related notice identified above in order to obtain all additional attachments referenced herein (e.g. CHEERS Industry Guide, Statements of Objectives (SOO), and S&amp;T Protection Appendices)

The Air Force Research Laboratory, Human Effectiveness Directorate (RH) and the United States Air Force School of Aerospace Medicine (USAFSAM), is soliciting white papers (and potentially later technical and cost proposals) on the research located in the Continuing Enabling, Enhancing, Restoring and Sustaining (CHEERS) Multiple Authority Announcement (MAA) Statements of Objectives, FA238424S2233. This Solicitation is limited to those efforts that meet the requirements of 10 USC 4023, which includes the Secretary of Defense and the Secretaries of the military departments may each buy ordnance, signal, chemical activity, transportation, energy, medical, space- flight, telecommunications, and aeronautical supplies, including parts and accessories, and designs thereof, that the Secretary of Defense or the Secretary concerned considers necessary for experimental or test purposes in the development of the best supplies that are needed for the national defense. List of Attachments: 1. "Open Period Solicitation 1_ARA Amend 01" 2. "Attachment 1 - List of Provisions and Clauses (ARA)" Related Notice: Multiple Authority Announcement (MAA) FA238424S2233, "Continuing Human Enabling, Enhancing, Restoring and Sustaining (CHEERS)" Note: You MUST refer to the related notice identified above in order to obtain all additional attachments referenced herein (e.g. CHEERS Industry Guide, Statements of Objectives (SOO), and S&amp;T Protection Appendices)

The Mechanics of Materials and Structures program supports fundamental research in mechanics as related to the behavior of deformable solid materials and structures under internal and external actions. The program supports a diverse spectrum of research with emphasis on transformative advances in experimental, theoretical, and computational methods. Submitted proposals should clearly emphasize the contributions to the field of mechanics. Proposals related to material response are welcome, including, but not limited to, advances in fundamental understanding of deformation, fracture, and fatigue as well as contact and friction. Proposals that relate to structural response are also welcome, including, but not limited to, advances in the understanding of nonlinear deformation, instability and collapse, and wave propagation. Proposals addressing mechanics at the intersection of materials and structures, such as, but not limited to, meta-materials, hierarchical, micro-architectured and low-dimensional materials are also encouraged. Proposals that explore and build upon advanced computing techniques and tools to enable major advances in mechanics are particularly welcome. For example, proposals incorporating reduced-order modeling, data-driven techniques, and/or stochastic methods with a strong emphasis on validation are encouraged. Also welcome are proposals addressing data analytics for deformation or damage response deduction from large experimental and computational data sets. Similarly, proposals that explore new experimental techniques to capture deformation and failure information for extreme ranges of loading or material behavior are also encouraged. Finally, experimental and computational methods that address information across multiple length and time scales, potentially involving multiphysics considerations are also welcome. Proposals with a focus on buildings and civil infrastructure system are welcome in CMMI and should be submitted to the program on Structural and Architectural Engineering Materials (SAEM). Proposals addressing processing and mechanical performance enhancements should be submitted to the Materials Engineering and Processing (MEP) program. Investigators with proposals focused on design methodological approaches and theory enabling the accelerated development and insertion of materials should consider the Design of Engineering Material Systems (DEMS) program. Lastly, investigators with interest in developing a combined theoretical and experimental approach to accelerate materials discovery and development should direct their proposals to the Designing Materials to Revolutionize and Engineer Our Future (DMREF) opportunity. Proposers are actively encouraged to email a one-page project summary to MOMS@nsf.gov before full proposal submission to determine if the research topic falls within the scope of the MOMS program.

The Facility and Instrumentation Request Process (FIRP) solicitation describes the mechanism by which the research community can propose projects that require access to instrumentation and facilities sponsored by the Facilities for Atmospheric Research and Education (FARE) Program in the Division of Atmospheric and Geospace Sciences (AGS). FARE provides funding to a variety of organizations to make specialized instrumentation and facilities available to the atmospheric science research community through the Lower Atmosphere Observing Facilities (LAOF) and the Community Instruments and Facilities (CIF) programs. FIRP allows for parallel evaluation of intellectual merit and broader impacts along with the feasibility of the proposed project. All proposals to AGS that require the use of FARE-sponsored assets must be submitted through this solicitation. The FIRP solicitation offers three proposal submission tracks based&#8239;on the type and purpose of the request: Track 1 - Education and Outreach. Track 2 - Single Facility Request. Track 3 - Field Campaigns. Preference for funding will be given to proposals submitted to programs in the Division of Atmospheric and Geospace Sciences (AGS) in the Geosciences Directorate (GEO). If you are planning to submit a proposal to a program outside AGS, including NSF-wide or Directorate-wide solicitations, please contact the FARE program director, Shree Mishra at fare@nsf.gov to discuss the timelines, review process, and budget request for the use of FARE assets.

The Engineering Design and Systems Engineering (EDSE) program supports fundamental research that advances design science and/or systems science through the creation of new knowledge about the design of engineered artifacts. Engineered artifacts include, but are not limited to, devices, products, processes, platforms, materials, organizations, systems, and systems of systems. The program focuses on design as a system, in which designers, the artifacts they create, the methods they use to create them, and the environment in which this occurs are all subject to rigorous scientific inquiry, along with the interactions among these elements. The EDSE program strongly encourages proposals that embrace the multidisciplinary nature of design and supports well-defined collaborations of experts in design science and/or systems science with experts in other domains, including (but not limited to) the social, behavioral, computational, and natural (biological and physical) sciences. Competitive proposals will be firmly grounded in theory, will demonstrate the potential of the proposed work to improve design, and will include a plan to rigorously assess the performance and effectiveness of the proposed research methods across all domains involved. In particular, the EDSE program supports fundamental contributions in areas that include but are not limited to design representation; design optimization; design validation; mechanism design; robotics and intelligent system design; design of engineered materials systems; design cognition; design collaboration; data science and artificial intelligence in design; design in under-resourced communities; immersive design; and design at extreme scales and in extreme environments. Prospective investigators are encouraged to discuss their research ideas with the Program Director in advance of proposal preparation and submission.

The Engineering for Civil Infrastructure (ECI) program supports fundamental research in geotechnical, structural, materials, architectural, and coastal engineering. The ECI program promotes research that can shape the future of the nation&rsquo;s physical civil infrastructure and that can contribute to climate change adaptation and mitigation, and hazards and disaster resilience. Types of civil infrastructure that the ECI program considers include, but are not limited to, buildings, residential construction, earth and earth retaining structures, and components of flood protection systems; water, waste disposal, and wastewater systems; energy infrastructure (excluding nuclear); and transportation systems (excluding pavements). Both disciplinary and convergent research that can address the challenges of physical civil infrastructure to be resilient and sustainable over its service lifetime are of particular interest. Broader impacts of ECI research include fostering community welfare for an equitable and prosperous nation and promoting environmentally friendly, circular economy policies. The ECI program supports research that advances knowledge on the behavior of physical civil infrastructure subjected to and interacting with the natural environment during construction; under service and long-term conditions, including increased demands due to climate change adaptation and other emerging stressors; and under conditions caused by single or multiple extreme hazard events (extreme weather, windstorms, earthquakes, tsunamis, storm surges, landslides, and fire, including wildland-urban interface fire). The ECI program also supports research on geomaterials and infrastructure materials utilized in load-bearing systems as well as in non-structural systems. Of particular interest is experimental and analytical/computational research to advance the fundamental understanding of coupled multi-physics, multi-scale (spatial and temporal), multi-functional behavior of these materials and their intended use in civil infrastructure. The ECI program supports research on civil infrastructure that contributes to the National Science Foundation&rsquo;s role in the National Earthquake Hazards Reduction Program (NEHRP) and the National Windstorm Impact Reduction Program (NWIRP). Principal Investigators are encouraged to leverage NSF&rsquo;s investments in the Natural Hazards Engineering Research Infrastructure (NHERI) experimental, computational modeling and simulation, and data resources ( https://www.designsafe-ci.org/ ) in their research to accelerate advances needed for reducing the impacts of natural hazards on civil infrastructure. The NHERI Science Plan ( https://www.designsafe-ci.org/facilities/nco/science-plan/ ) offers a range of research topics that could benefit from the use of NHERI resources and are relevant to the ECI program. The ECI program does not support research that addresses natural resource exploration or recovery, investigates blasts and explosions, develops sensor and measurement technologies, or focuses on hazard characterization. The ECI program only supports fundamental research topics for civil infrastructure with a strong grounding in theory. Topics which fall within the mission for research and/or development of other federal and state agencies are appropriate for the ECI program only when addressing fundamental scientific questions. Research on natural hazard characterization is supported through programs in the NSF Directorate for Geosciences. Proposers are actively encouraged to email a one-page project summary to the ECI Program Officers before submitting a full proposal for guidance on whether the proposed research topic falls within the scope of the ECI program; this guidance especially should be requested for multi-disciplinary research proposals, proposals for which research and/or development on the subject civil infrastructure(s) are also supported by other federal and state agencies, and proposals that consider civil infrastructure not listed above.

The Marine Geology and Geophysics Core Program supports research on all aspects of the geology and geophysics of the present ocean basins and margins, as well as those of the Great Lakes. The Program supports science that includes: Structure, composition, tectonics, and evolution of the oceanic lithosphere Paleoceanography, paleoclimate, and sea level change Submarine volcanology, petrology and geochemistry of the oceanic crust and upper mantle lithosphere Marine hydrogeology, water-rock interaction, seeps and gas hydrates Hydrothermal venting and in situ fluid processes, and associated geochemistry Geochemical indicators of life operating below the seafloor Marine sedimentology, stratigraphy, sediment transport, and diagenesis Mid-ocean ridge spreading, back-arc rifting, transform processes, and ocean island/seamount formation and evolution Submarine components of subduction zone systems and passive margins Marine geohazards (e.g., earthquakes, faulting, mass wasting, geological aspects of tsunamis) Coastal processes (e.g., geological aspects of hurricanes, sea-level change, erosion, offshore deposition) The Marine Geology and Geophysics Program supports acquisition of new field data and the leveraging of and/or synthesis of existing data. The program supports analytical and laboratory experimental projects, methods development, and modeling. All activities should have relevance to and advance the understanding of marine geoscience processes. The Program interfaces with NSF programs across the Geosciences and across the Agency. For proposals that cross between Programs, proposers should contact the relevant Programs to seek guidance on submission.

The Dynamics, Control and Systems Diagnostics (DCSD) program supports fundamental theoretical, computational, and experimental research that is knowledge-driven or inspired by applications, focusing on the modeling, analysis, diagnostics and control of the dynamic behavior of systems. Proposals submitted to the DCSD program should articulate how the proposed work advances knowledge in at least one of the following foundational areas: Modeling: mathematical frameworks to understand and predict the behavior of dynamic systems. Analysis: theoretical and computational tools for discovery and exploration of salient properties of dynamic systems. Diagnostics: methods to relate underlying causes to observed behaviors of dynamic systems. Control: methods to produce desired behavior, or mitigate undesired behavior, in dynamic systems. The DCSD program encourages principal investigators (PIs) to request the amount of financial support necessary and sufficient to achieve the scope of the proposed research and to justify this accordingly. PIs are encouraged to send a one-page Project Summary to dcsd@nsf.gov to receive feedback from the Program Directors on whether the project aligns with DCSD program objectives.

To facilitate fundamental research in the atmospheric sciences, the Division of Atmospheric and Geospace Sciences (AGS) supports state-of-the-art instruments and facilities through the Facilities for Atmospheric Research and Education (FARE) Program. The FARE Program includes the Lower Atmosphere Observing Facilities (LAOF) and the Community Instruments and Facilities (CIF). Lower Atmospheric Observing Facilities The National Science Foundation (NSF) Division of Atmospheric and Geospace Sciences (AGS)Lower Atmospheric Observing Facilities (LAOF) Program oversees a portfolio of multi-user national facilities that are sponsored by NSF for use by the geosciences research community. Program management resides within AGS in the NCAR and Facilities Section (NFS) which provides a single point for coordination of planning and resources. The LAOF program enables geoscience research through the provision of specialized facilities, instrumentation, and field support services necessary to carry out the scientific field work associated with investigations of a wide range of geophysical phenomena. The program is actively involved in oversight of LAOF facilities and decisions about the acquisition, operation, maintenance, upgrading and replacement of these facilities based on input from the scientific community. LAOF funding supports both the planning for scientific field programs (e.g., experimental design, operational plans, logistical support) and the deployment of NSF-sponsored facilities. Proposals to the LAOF program are acceptedby invitation only. Please contact the FARE program director if you intend to submit a proposal to this program. Community Instrumentation and Facilities (CIF) The CIF program provides the NSF-sponsored atmospheric sciences research community with access to specialized instrumentation for field and laboratory-based studies.The program requests proposals from instrument and facility providers who will make their equipment available for community use through an NSF-defined request process.Support will be provided for limited technician time, minor upgrades, and travel for outreach.

The Mind, Machine, and Motor Nexus (M3X) program supports fundamental research that enables intelligent engineered systems and humans to engage in bidirectional interaction in a physics-based environment, to enhance and ensure safety, productivity, and well-being. For the purpose of this program an intelligent engineered system is a human-designed system &mdash; physical, virtual, or a combination of both &mdash; that interacts with its environment to achieve specific goals. These systems collect data, analyze it to make informed decisions, and take actions that enhance safety, efficiency, and well-being. They may operate autonomously or collaboratively with humans, adapting their actions based on the data they collect. A key requirement for the M3X program is that these systems must function within a physics-based environment, whether physical or virtual, where interactions exhibit recognizable physical behaviors, such as those associated with gravity, friction, force, and inertia. Intelligent engineered systems are becoming increasingly integrated into our daily lives, interacting with humans across diverse environments and through different modalities (for example, visual, haptic, auditory). M3X aims to deepen the understanding of such interactions, particularly in complex and dynamic settings such as elder care, disaster response, and dynamic workplaces. The program encourages explorations into the physical or cognitive principles that enable or constrain human-machine collaboration, advancing foundational theories, interaction modeling, and technological innovations that enhance adaptability, efficiency, and intuitiveness. Proposals submitted to the M3X program must clearly articulate how the proposed work advances knowledge of bidirectional interactions between humans and intelligent engineered systems. Examples include robots assisting in disaster response, smart environments that learn user preferences, and virtual reality-based rehabilitation technologies that simulate plausible physics. While proposals are not required to address all aspects of the interaction, they must propose significant contributions to at least one of the following areas: Conceptual Frameworks and Theoretical Modeling Development of new conceptual, mathematical, or computational frameworks that provide structured approaches to understanding and analyzing the bidirectional interaction between humans and engineered systems. These frameworks serve as formalized models or methodologies that guide research in areas such as cognition, perception, and behavior of both humans and intelligent engineered systems during their interactions. Additionally, these computational frameworks facilitate the modeling of safe operating conditions in dynamic task environments and the identification of theoretical limits of cognitive and physical performance capabilities during interaction. Dynamic Interaction Analysis and Simulation Investigation of emerging and established bidirectional interaction phenomena in physical, virtual, or hybrid environments. Potential topics may include learning, co-adaptation, cooperation, competition, and multi-scale interaction. The program also welcomes novel experimental paradigms to evaluate processes and performance. Innovative Technologies for Enhanced Interaction Development of methods, tools, and technologies to enable novel or improved forms of bidirectional interaction, guided by hypotheses and interaction-driven requirements. Potential topics may include creating meaningful task environments (physical, virtual, or hybrid); designing new modalities and interfaces for interaction; developing advanced evaluation, measurement, and instrumentation methods; testbeds, and improving real-time integration of multi-modal sensorimotor data. The M3X program strongly encourages proposals that aim to establish new perspectives and paradigms across one or more of the three areas listed above . To ensure strong alignment with M3X objectives, Principal Investigators are encouraged to submit a one-page Project Summary to M3X@nsf.gov for feedback from Program Directors.

The Environmental Engineering program is part of the Environmental Engineering and Sustainability cluster, which also includes 1) the Nanoscale Interactions program; and 2) the Environmental Sustainability program. Environmental engineering is an interdisciplinary field that applies chemical, biological, and physical scientific principles to protect human and ecological health. The goal of the Environmental Engineering program is tosupport potentially transformative fundamental research that applies scientific and engineering principles to 1) prevent, minimize, or re-use solid, liquid, and gaseous discharges of pollution to soil, water, and air by closing resource loops or through other measures; 2) mitigate the ecological and human-health impacts of such releases by smart/adaptive/reactive amendments or manipulation of the environment, and 3) remediate polluted environments through engineered chemical, biological, and/or geo-physical processes. Integral to achieving these goals is a fundamental understanding of the transport and biogeochemical reactivity of pollutants in the environment. Therefore, research on environmental micro/biology, environmental chemistry, and environmental geophysics may be relevant providing the research has a clear objective of protecting human and ecological health. Major areas of interest include (but are not limited to): Building afuture without pollution or waste: Investigation of innovative biogeochemical processes that prevent or minimize the production of waste; waste valorization and other research that will lead to new technologies toextract resources from waste streams to close the resource loop. Sustainable supply and protection ofwater: Investigation of innovative biogeochemical processesthat remove, biologically or chemically transform, and/or prevent therelease of contaminants in surface and groundwater; innovative processesfor recovery of water, nutrients, and other resources from wastewater,saline water, or brines; innovative approaches to smart and adaptive management of surface water, groundwater, and urban watersheds and storm water to maintain/improve quality and prevent downstream impacts from nutrients and other water constituents. Environmentalchemistry, fate, and transport of nutrients and contaminants of emergingconcern in air, water, soils, and sediments:Investigation of transport and biogeochemical reactivity in theenvironment; environmental forensics to identify sources and reaction pathways; field- and laboratory scale experimental research that bridgesgaps between data and predictions from molecular, continuum, and field-scale modeling. Environmentalengineering of the built environment: Research to understand the biogeochemical reactivity of the builtenvironment with the goal of enhancing and improving human and ecological health; research that will lead to new technologies to improve outdoor and indoor air quality; research to understand how drinking water and wastewater chemical characteristics and microbial community structure impact or are affected by water quality and human health. NOTE: Proposals with a scientific focus on chemical or physical separation processes (for example, materials or processes for reverse osmosis, membrane distillation, and hypo-filtration) should be submitted to the Interfacial Engineering program (CBET 1417). Proposals that seek to advance fundamental and quantitative understanding of the behaviors of nanomaterials and nanosystems should be submitted to the Nanoscale Interactions program (CBET 1179). Proposals focused on in vitro molecular-level environmental chemistry research should be submitted to Environmental Chemical Sciences program (CHE-ECS 6882). Proposals focusing on industrial ecology, green engineering, and ecological/earth systems engineering should be submitted to the Environmental Sustainability program (CBET 7643). Proposals whose main research focus is on materials development, sensors, or environmental monitoring that do not seek to understand biogeochemical reactivity mechanisms or treatment efficiency are not encouraged and may be returned without review. Innovative proposals outside of these specific interest areas may be considered. However, prior to submission, it is recommended that the PI contact the program director to avoid the possibility of the proposal being returned without review. INFORMATION COMMON TO MOST CBET PROGRAMS Proposals should address the novelty and/or potentially transformative nature of the proposed work compared to previous work in the field. Also, it is important to address why the proposed work is important in terms of engineering science, as well as to also project the potential impact on society and/or industry of success in the research. The novelty or potentially transformative nature of the research should be included, as a minimum, in the Project Summary of each proposal. The duration of unsolicited proposal awards in CBET is generally up to three years. Single-investigator award budgets typically include support for one graduate student (or equivalent) and up to one month of PI time per year(awards for multiple investigator projects are typically larger). Proposal budgets that are much larger than typical should be discussed with the program director prior to submission. Proposers can view budget amounts and other information from recent awards made by this program via the &ldquo;What Has Been Funded (Recent Awards Made Through This Program, with Abstracts)&rdquo; link towards the bottom of this page. Faculty Early Career Development(CAREER)program proposals are strongly encouraged. Award duration is five years. The submission deadline for Engineering CAREER proposals is in July every year. Learn more in the CAREER program description . Proposals for Conferences, Workshops, and Supplements: PIs are strongly encouraged to discuss their requests with the program director before submission of the proposal. Grants forRapid Response Research(RAPID)andEArly-concept Grants for Exploratory Research(EAGER)are also considered when appropriate.Please note that proposals of these types must be discussed with the program director before submission.Grant Opportunities for Academic Liaison with Industry (GOALI)proposals that integrate fundamental research with translational results and are consistent with the application areas of interest to each program are also encouraged.Please note that RAPID, EAGER, and GOALI proposals can be submitted anytime during the year. Details about RAPID, EAGER, and GOALI are available in the Proposal &amp; Award Policies &amp; Procedures Guide(PAPPG), Part 1, Chapter II, Section E: Types of Proposals . Compliance: Proposals that are not compliant with the Proposal &amp; Award Policies &amp; Procedures Guide (PAPPG) will be returned without review.

The Manufacturing Systems Integration (MSI) Program supports fundamental research addressing the opportunities and challenges that digital technologies present for the next industrial revolution, with particular emphasis on the digital integration of design and manufacturing within the larger life cycle ecosystem. Manufacturing Systems Integration proposals should address underlying principles and advances that are generalizable for globally competitive and world leading industries. Connectivity, automation, and secure collaboration are examples of areas that are integral to digital environments capable of supporting the innovation, realization and sustainment of manufactured products and systems in the value creation process. Fundamental generalizable research for manufacturing systems integration might include, for example: Digital representation, protocols, and/or processes for integration and collaboration in manufacturing systems (machines and/or humans) Intelligent self-organizing production systems Ease of use, interoperability and seamless integration of technologies, machines, and humans Service-oriented architectures and systems Data sets that are compatible and usable across platforms Reliable and secure communications within and across the manufacturing value chain Integration of distributed manufacturing systems across time and space, including incorporating both legacy and leading-edge equipment and technologies Methods for assessing the impact and value of externalities throughout the life cycle within the digital environment Interdisciplinary, convergent proposals that bring diverse perspectives, populations, disciplines, and capabilities together are welcome. It is strongly encouraged and expected that investigators discuss their ideas with a MSI program director well in advance of proposal submission.

The Operations Engineering (OE) program supports fundamental research on advanced analytical methods for improving operations in complex decision-driven environments. Analytical methods include, but are not limited to, deterministic and stochastic modeling, optimization, decision and risk analysis, data science, and simulation. Methodological research is highly encouraged but must be motivated by problems that have potential for high impact in engineering applications. Application domains of particular interest to the program arise in commercial enterprises (e.g., production/manufacturing systems and distribution of goods, delivery of services), the public sector/government (e.g., public safety and security), and public/private partnerships (e.g., health care, environment and energy). The program also welcomes operations research in new and emerging domains and addressing systemic societal or technological problems. The OE program particularly values cross-disciplinary proposals that leverage application-specific expertise with strong quantitative analysis in a decision-making context. Proposals for methodological research that are not strongly motivated by high-potential engineering applications are not appropriate for this program. PIs are encouraged to send any program inquiries to both Program Directors.

Selection of Consulting Firm for Restructuring of Ministry of Information Technology and Telecommunication

AGS Infrastructure Cluster &#8239; The Atmospheric and Geospace Sciences (AGS) Infrastructure Cluster (IC) is responsible for the oversight of facilities that enable research in the atmospheric and geospace sciences. The IC primarily oversee s the NSF National Center for Atmospheric Research (NCAR) , but i t also supports community-based instrumentation and facilities , and data storage and provisioning. NSF <span class="NormalTextRun SCXW90113113 BCX8" style="margin: 0px; padding: 0px; user-select: text; -webkit-user-drag: none; -webkit-tap-highlight-color: transparent;" data-ccp-chars

TheCombustion and Fire Systemsprogram is part of the Transport Phenomena cluster, which also includes 1) theFluid Dynamicsprogram; 2) theParticulate and Multiphase Processesprogram; and 3) theThermal Transport Processesprogram. The goal of theCombustion and Fire Systemsprogram is to create new knowledge to support advances in clean energy, climate change mitigation, a cleaner environment and public safety. The program endeavors to createfundamental scientific knowledge that is needed for safe, clean and useful combustion applications and for mitigating the effects of fire.The program aims to identify and understand the controlling basic principles and to use that knowledge to create predictive capabilities for designing and optimizing practical combustion devices and understanding fire. Important outcomesfor this program include: broad-based tools &mdash; experimental, theoretical, andcomputational &mdash; that can be applied to a variety of problems in combustion technologies and fire; science and technology for clean and efficient generation of power; discoveries that enable clean environments (for example, by reduction in combustion-generated pollutants); and enhanced public safety and climate change mitigation through research on wildland and building fire growth, inhibition, and suppression. Research areas of interest for this program include: Basic combustion science: Combustion of gas, liquid, and solid fuels over abroad range of temperatures, pressures, and compositions; combustion at supercritical conditions; advanced propulsion concepts; flame synthesis ofmaterials; integration of fuel design and combustion; control of reaction pathways; development of chemical kinetics models, analytical and numerical predictive methods, and advanced diagnostic tools. Combustionscience related to clean energy: Increasing efficiency and reducing pollution; production and use of renewable and/or carbon-free fuels; biomass pyrolysis, gasification, and oxidation; technologies such as oxy-fuel combustion and chemical looping combustion for carbon capture. Fireprevention: Improved understanding of building and wildland fires to prevent their spread, inhibit their growth, and suppress them; prediction and mitigation of fires in the wildland-urban interface. Turbulence-chemistry interactions:Fundamental understanding of turbulent flow interactions with finite-rate chemical kinetic pathways at high Reynolds and Karlovitz number conditions, including but not limited to: (1) fundamental experiments to generate physico-chemical data to reduce theuncertainty of combustion chemistry and turbulent combustion models; (2)spatially/temporally well-resolved, multi-scale/multi-physics computations;novel approaches of developing embedded multi-scale direct numericalsimulation (DNS) of complex geometries and data-assimilations forincorporating measured data from the state-of-art in situ diagnostic approaches; (3) other innovative approaches on development and validation of predictive computational methods. NOTE: This is an NSF-AFOSR (Air Force Office of Scientific Research) joint funding area. Proposals will be jointly reviewed by NSF and AFOSR using the NSF merit reviewprocess.Actual funding format and agency split for an award(depending on availabilityof funds) will be determined after the proposal selection process. The AFOSR program that participates in this initiative is the program on Energy, Combustion, and Nonequilibrium Thermodynamics. Innovative proposals outside of these specific interest areas may be considered.However, prior to submission, it is recommended that the Principal Investigator contact the program director to avoid the possibility of the proposal being returned without review. INFORMATION COMMON TO MOST CBET PROGRAMS Proposals should address the novelty and/or potentially transformative nature of the proposed work compared to previous work in the field.Also, it is important to address why the proposed work is important in terms of engineering science, as well as to also project the potential impact on society and/or industry of success in the research.The novelty or potentially transformative nature of the research should be included, as a minimum, in the Project Summary of each proposal. The duration of unsolicited proposal awards in CBET is generally up to three years. Single-investigator award budgets typically include support for one graduate student (or equivalent) and up to one month of PI time per year(awards for multiple investigator projects are typically larger). Proposal budgets that are much larger than typical should be discussed with the program director prior to submission. Proposers can view budget amounts and other information from recent awards made by this program via the &ldquo;What Has Been Funded (Recent Awards Made Through This Program, with Abstracts)&rdquo; link towards the bottom of this page. Faculty Early Career Development(CAREER)program proposals are strongly encouraged.Award duration is five years.The submission deadline for Engineering CAREER proposals is in July every year. Learn more in the CAREER program description . Proposals for Conferences, Workshops, and Supplements: PIs are strongly encouraged to discuss their requests with the program director before submission of the proposal. Grants forRapid Response Research(RAPID)andEArly-concept Grants for Exploratory Research(EAGER)are also considered when appropriate.Please note that proposals of these types must be discussed with the program director before submission.Grant Opportunities for Academic Liaison with Industry (GOALI)proposals that integrate fundamental research with translational results and are consistent with the application areas of interest to each program are also encouraged. Please note that RAPID, EAGER, and GOALI proposals can be submitted anytime during the year. Details about RAPID, EAGER, and GOALI are available in the Proposal &amp; Award Policies &amp; Procedures Guide (PAPPG), Part 1, Chapter II, Section E: Types of Proposals. Compliance: Proposals that are not compliant with the Proposal &amp; Award Policies &amp; Procedures Guide (PAPPG) will be returned without review.

Many of the most pressing challenges in research and innovation require collaboration across national and disciplinary boundaries to achieve important advances. A growing number of topics are best addressed on a multilateral basis, building partnerships that leverage diverse expertise, data, infrastructure, and perspectives to advance understanding on critical topics of regional or global importance. At the same time, funders, research organizations, and researchers alike typically have limited experience with multilateral partnerships. The Office of International Science and Engineering&rsquo;s MultiPLEx program seeks to support visionary, and ambitious international multilateral research partnerships that are required to hasten progress in addressing grand challenges by leveraging research excellence in the U.S. and around the globe. The program also seeks to advance understanding of effective multilateral collaboration. MultiPLEx welcomes proposals that Address urgent research and/or societal challenge of global importance (including but not limited to critical and emerging technology research) and require an inherently international multilateral approach to achieve impactful research results, partnering with at least two countries other than the U.S. Proposals that engage partners across distinct geographic regions are an area of interest. Make clear how the proposed international collaboration will enable research advances and broader impacts that go beyond what can be accomplished by a narrower team. Include a diverse group of U.S. institutions and/or individuals, leveraging the full range of talent that society has to offer MultiPLEx funds support the U.S. research team. Research partners should seek funding from their own national funding agencies or from other sources. A typical MultiPLEx award will be up to three years in duration. The MultiPLEX program is not intended to replace existing OISE or directorate programs. Proposals submitted to MultiPLEX must fall outside the scope of existing OISE or directorate programs. Any proposal submitted to MultiPLEx that is not responsive to this Program Description may be transferred to another OISE program or returned without review. OISE may periodically issue a Dear Colleague Letter inviting MultiPLEx proposals in specific priority areas. PIs interested in submitting proposals that do not respond to a DCL are strongly encouraged to consult a MultiPLEx program director prior to submission to confirm appropriateness. Unless specified in a DCL, MultiPLEx proposals may be submitted any time.

The Geospace Cluster (GC) in the Division of Atmospheric and Geospace Sciences (AGS) supports fundamental and solutions-oriented research, technology development and education related to the Earth's near-space environment (including the mesosphere, thermosphere, ionosphere, exosphere, magnetosphere and radiation belts) and the inner heliosphere and solar atmosphere. The GC advances knowledge of the Sun--Earth system, including how various parts of the system are coupled through dynamical, electrodynamical and chemical processes. The GC supports research on the societal impacts of these processes including space weather and upper atmosphere climate change, with the aim of increasing resilience to such natural hazards. The GC supports research that uses ground-based or space-based observational facilities and instruments as well as data centers and a broad range of theoretical, modeling, observational, data analyses and laboratory activities. General research topics that are supported by the GC include, but are not limited to: Aeronomy, including studies of wave dynamics, ionization, recombination, chemical reaction, photo emission and transport of energy and momentum within and between the mesosphere, thermosphere and ionosphere of the Earth; how this global system is coupled to the stratosphere below and magnetosphere above; and the plasma physics of phenomena manifested in the coupled ionosphere-magnetosphere system. Magnetospheric physics, including studies of the magnetosphere, or the cavity carved out of the solar wind by the Earth's magnetic field, its energization by the solar wind and population by solar and ionospheric sources; waves and instabilities in such natural plasmas; the origin of planetary electric fields; the origin of geomagnetic storms and substorms; and the coupling among the radiation belts, magnetosphere, ionosphere and atmosphere. Solar-terrestrial physics, including how energy generation and eruptive processes occur in the solar atmosphere and how energy and momentum are transported within the Sun-Earth system; solar dynamo, solar activity cycle and magnetic flux emergence; eruptive activity including solar flares and coronal mass ejections; solar wind heating, solar energetic particles and interactions with cosmic rays; solar wind/magnetosphere boundary; and helioseismology. Space weather and space climate, including solar or terrestrial drivers of space weather; observations and modeling of the integrative geospace system that could lead to better predictive capabilities of the time-varying space environment; and characterization of space weather impacts on critical infrastructure and technological systems. Proposals to the GC are welcome at any time. However, the following solicitations in support of specific geospace science and community efforts have target dates or deadlines. They also may have PI and/or Institution restrictions. Please refer to the solicitation documents for further details: The Coupling, Energetics, and Dynamics of Atmospheric Regions (CEDAR) targeted research program aims to understand the behavior of the Earth's atmospheric regions from the middle atmosphere upward through the thermosphere and ionosphere into the exosphere in terms of coupling, energetics, chemistry and dynamics on regional and global scales. The Geospace Environment Modeling (GEM) targeted research program supports investigations of the physics of the Earth's magnetosphere and the coupling of the magnetosphere to the atmosphere and solar wind, including for making accurate predictions of the geospace environment. The Solar, Heliospheric, and Interplanetary Environment (SHINE) targeted research program supports enhanced understanding of and predictive capabilities for the processes by which energy in the form of magnetic fields and particles are produced by the Sun and/or accelerated in interplanetary space and on the mechanisms by which these fields and particles are transported to the Earth through the inner heliosphere. The Faculty Development in geoSpace Science (FDSS) solicitation integrates topics in geospace science, including solar and space physics and space weather research, into natural sciences, engineering or related departments at U.S. institutions of higher education. The solicitation also stimulates the development of undergraduate or graduate programs or curricula to train the next generation of leaders in geospace science. The Geospace Cluster participates in other AGS, GEO and NSF programs and solicitations including but not limited to: Distributed Array of Small Instruments (DASI) ECosystem for Leading Innovation in Plasma Science and Engineering (ECLIPSE) AGS encourages and inspires scientific leaders by investing in the atmospheric and geospace sciences, enhancing educational opportunities and experiences and supporting faculty and researchers at all career stages. The Division expects that proposers will integrate education, outreach and dissemination activities into their research plans in compliance with NSF Broader Impacts Merit Review criteria. AGS invites proposals that include plans for workforce development, educational and outreach activities, open science initiatives and efforts to broaden participation and encourage diverse talent in the atmosphere and geospace sciences. Furthermore, AGS encourages proposals from all institutions, including Minority Serving Institutions, Emerging Research Institutions and institutions in EPSCoR jurisdictions. The Proposal & Award Policies & Procedures Guide (PAPPG) provides the instructions for submitting proposals to AGS. Additionally, Chapter II.F of the PAPPG defines "Other Types of Proposals," including community-building proposals such as Conference, Travel or Planning Proposals and special categories of proposals, such as Rapid Response Research (RAPID) and EArly-concept Grants for Exploratory Research (EAGER). Proposals that are not compliant with the PAPPG will be returned without review. The following sections highlight specific NSF-, GEO-, or AGS-wide solicitations that may be relevant to the AGS Community. Please be aware that solicitations are frequently updated, so make sure that you are looking at the most recent version. Career Development AGS Postdoctoral Research Fellowship (AGS-PRF) : The AGS-PRF program supports researchers (also known as Fellows) for up to 24 months at the institution of their choice. The program is intended to recognize beginning investigators of significant potential and provide them with research experience that will broaden perspectives, facilitate interdisciplinary interactions, and establish them in leadership positions within the AGS community. Faculty Early Career Development Program (CAREER) : The CAREER program supports early career (assistant professor-level) faculty who have the potential to serve as academic role models in research and education and to lead advances for their department or organization. Awards are 5 years long and must integrate research and education. Mid-Career Advancement (MCA) : The MCA program provides opportunities for scientists and engineers at the associate professor rank (or equivalent) to substantively enhance and advance their research program through synergistic partnerships. Capacity Development EMpowering BRoader Academic Capacity and Education (EMBRACE) : The EMBRACE program supports research and educational efforts at "non-R1" institutions, including non-R1 minority serving institutions (MSIs), two-year colleges (2YCs), primarily undergraduate institutions (PUIs), and emerging research (ERIs) and master's level institutions. Historically Black Colleges and Universities Excellence in Research (HBCU - EiR) : The HBCU-EiR program supports research at public and private historically Black colleges and universities to strengthen research capacity and promote engagement with NSF. Facilitating Research at Primarily Undergraduate Institutions (RUI and ROA): RUI awards support PUI faculty in research that engages them in their professional field(s), build capacity for research at their home institution, and support the integration of research and undergraduate education. ROA awards similarly support PUI faculty research, but these awards typically allow faculty to work as visiting scientists at research-intensive organizations where they collaborate with other NSF-supported investigators. Instrumentation and Facilities Major Research Instrumentation : The MRI program supports requests for up to $4 million from NSF for the development or acquisition of multi-user research instruments that are critical to the advancement of science and engineering. Mid-scale Research Infrastructure-1 : The MSRI-1 program supports the design and implementation of research infrastructure--including equipment, cyberinfrastructure, large-scale datasets and personnel--whose total project costs exceed the NSF Major Research Instrumentation program limit but are under $20 million. Mid-scale Research Infrastructure-2 : The MSRI-2 program supports the implementation of research infrastructure--including equipment, cyberinfrastructure, large-scale datasets and personnel--whose total project costs fall between $20 million and $100 million.

Large-scale simulations and the ability to accumulate massive amounts of data have revolutionized science and engineering. The goal of the Computational and Data-enabled Science and Engineering (CDS&amp;E) meta-program is to identify and capitalize on opportunities for major scientific and engineering breakthroughs through new computational and data-analysis approaches and best practices. The CDS&amp;E meta-program supports projects that harness computation and data to advance knowledge and accelerate discovery above and beyond the goals of the participating individual programs. The intellectual drivers may be in an individual discipline or cut across more than one discipline in various Divisions and Directorates. A CDS&amp;E proposal should enable and/or utilize the development and adaptation of advances in research and infrastructure in computational and data science. The CDS&amp;E meta-program encourages research that pushes the envelope of science and engineering through computation and data, welcoming proposals in any research area supported by the participating divisions. A proposal may address topics that develop or enable interactions among theory, computing, experiment, and observation to achieve progress on hitherto intractable science and engineering problems. Areas of emphasis for CDS&amp;E vary by program. PIs are advised to consult the "related programs" links below before submitting. The CDS&amp;E meta-program is not intended to replace existing programs that support projects involving computation or the analysis of large or complex data sets using established methods. Rather, proposals submitted to the CDS&amp;E meta-program must have a significant component of computational or data science that goes well beyond what would typically be included in these programs.Any proposal submitted to the CDS&amp;E program that is not responsive to this Program Description may be transferred to or reviewed within the context of an individual program. A proposal requesting consideration within the context of CDS&amp;E should begin the title with the identifying acronym "CDS&amp;E:". Supplement requests to existing awards may also be considered. A CDS&amp;E proposal should include substantive science, engineering, or computing research. Algorithm and pilot software development supporting science and engineering may also be appropriate, depending on the program. Proposers who seek to implement proven, existing methods into robust cyberinfrastructure are referred instead to the program on Cyberinfrastructure for Sustained Scientific Innovation (CSSI). A CDS&amp;E proposal should be submitted to one of the "Related Programs" or Divisions by the associated submission window, deadline, or target date listed in the table below. In picking the most relevant program, PIs are advised to read program descriptions and solicitations carefully and consult with cognizant Program Officers before proposal preparation. Proposal submissions outside the receiving program's scientific scope may be transferred to a different program or returned without review. Due Dates Directorate Division and Program Submission Window or Target Date ENG Division of Chemical, Bioengineering, Environmental, and Transport Systems September 01, 2024 - September 16, 2024 September 01- September 15, Annually Thereafter ENG Division of Civil, Mechanical and Manufacturing Innovation September 01, 2024 - September 16, 2024 September 01- September 15, Annually Thereafter MPS Division of Chemistry - Chemical Catalysis (CAT), Chemical Mechanism, Function, and Properties (CMFP), Chemical Synthesis (SYN) September 01, 2024 - September 30, 2024 September 01 - September 30, Annually Thereafter MPS Division of Materials Research October 15, 2024 October 15, Annually Thereafter MPS Division of Astronomical Sciences - Advanced Technologies and Instrumentation October 01, 2024 - November 15, 2024 October 01 - November 15, Annually Thereafter MPS Division of Chemistry - Chemical Measurement and Imaging (CMI), Environmental Chemical Sciences (ECS), and Macromolecular, Supramolecular and Nanochemistry (MSN) October 01, 2024 - October 31, 2024 October 1 - October 31, Annually Thereafter MPS Division of Mathematical Sciences October 15, 2024 - October 31, 2024 October 15 - October 31, Annually Thereafter MPS Division of Astronomical Sciences - Astronomy and Astrophysics Research Grants October 01, 2024 - November 15, 2024 October 01 - November 15, Annually Thereafter MPS Division of Physics: Investigator-Initiated Research Projects &ndash; Plasma Physics program November 20, 2024, Third Monday in November, Annually Thereafter MPS Division of Chemistry - Chemistry of Life Processes (CLP), Chemical Structure and Dynamics (CSD), Chemical Theory, Models and Computational Methods (CTMC) Full proposals accepted anytime

Crosscutting Activities in Materials Research (XC) coordinates and supports crosscutting activities within the Division of Materials Research (DMR) and more broadly across NSF. The emphasis within XC is diversity and inclusion, international cooperation, and education (including experiential learning at REU/RET Sites). Additionally, activities that broadly engage the community, such as summer schools, institutes, workshops, and conferences that do not fit within just one or two programs in the Division of Materials Research, may be supported by XC.If preparing a workshop proposal, follow the Special Guidelines for Conference Proposals outlined in the Proposal &amp; Award Policies &amp; Procedures Guide (PAPPG). Occasionally projects crossing several programs in DMR are shifted to XC or co-funded by XC. The goal is to bring greater visibility to these projects through DMR&rsquo;s XC website. Proposals are welcome that do not fit elsewhere at NSF that are also highly relevant for the materials research and education community. Some XC activities are co-funded with other NSF units. XC does not handle traditional research proposals suitable for submission to topical or other programs in DMR. For this reason, the XC Team welcomes inquiries that include a draft of one-page NSF summary, or a shorter write-up. It is highly recommended that you contact one of the Program Directors for XC prior to submission of a full proposal exceeding $50,000. Crosscutting Activities in Materials Research (XC) replaced the Office of Special Programs in Materials Research (OSP) in 2016. Diversity: Activitiesthat focus on broadening participation of underrepresented groups and/or diversity and inclusion are supported. Supplements(e.g., CLB, AGEP-GRS, MPS-GRSV and ROAs) are handled by the cognizantProgram Director of the original award. See the Related Publications section below for more information. XC supports Facilitation Awards for Scientists and Engineers with Disabilities (see Proposal &amp; Award Policies &amp; Procedures Guide, Chapter II.E.6 for details) https://www.nsf.gov/pubs/policydocs/pappg18_1/pappg_2.jsp#IIE6 International: In2016 a Dear Colleague Letter outlining collaborative projectswith Israel (BSF) was issued; it remains active until archived. Submissionof full proposals with an international component may be made to thedisciplinary programs (but not to XC directly). Supplementsare handled by the cognizant Program Director of the original award. Discontinuedin 2014: The previous International Materials Institutes (IMI)and Materials World Network (MWN) programs are no longer supported . Education: Innovativeand creative ideas in education (e.g., materials science and/or engineering, solid state and materials chemistry, condensed matterphysics, integrated computational materials science/engineering, ormaterials data science/analytics) that do not have a forum elsewhere at NSFare of interest. XC encourages outreach and/or materials education proposals targeting underserved populations such as K-12students in rural communities and those designed to increase public scientific literacy. Research Experiences for Undergraduates (REU)/ Research Experiences for Teachers (RET): reu.dmr@nsf.gov XCcoordinates the REU and RET Sites activities within DMR. See the REU Site Solicitation for deadlines and additional program information. REU/RET supplements to research proposals are handled by the cognizant ProgramDirector of the original award.

Infrastructure systems comprise complex connections between physical components, organizational structures and operational methods that support the needs of people and communities at the local, regional, national, and global scales. Such systems form the backbone of society, providing essential services as well as ensuring public health and welfare, economic prosperity and national security, and are expected to function under all operational conditions. Meanwhile, infrastructure systems are capital intensive and vulnerable to disruptions from extreme events, including natural disasters, social crises, and malicious attacks. Disruptions in one system can have cascading impacts on others in space and over time. Moreover, short- versus long-term trade-offs, unintended consequences, and maladaptation are not often accounted for. How systems function at the &ldquo;extreme,&rdquo; which can be due to disruptors from the introduction of innovation, the convergence of technologies, sudden changes to their utilization and access, dramatic changes in operating environments, and changes to demand during crises are of particular interest. To ensure the efficiency, sustainability, resilience, and fair use of infrastructure systems, it is important to continuously improve and optimize their design, operations, system monitoring and performance assessment in dynamic, uncertain and sometime unknown environments. While functioning at extremes is of interest, the program also supports infrastructure systems research under the full range of operating conditions, across a variety of hazards, and in urban, suburban, and rural communities. The program particularly encourages interdisciplinary and multidisciplinary exploration that will open new research frontiers and significantly expand and transform relevant research communities. The program welcomes research that addresses novel system integration, user-inspired system and service design, data analytics, and socio-technical studies focused on engineering and system innovation during normal and extreme conditions. The program also values innovative research efforts focused on collecting, standardizing, and sharing large-scale databases of real-world infrastructure systems and people-infrastructure interactions during normal and extreme operating conditions, which can be instrumental in providing benchmarks for model verification and validation and for advancing future research innovation in ISP. The ISP program supports research on lifeline systems and communities that contributes to the National Science Foundation&rsquo;s role in the National Earthquake Hazards Reduction Program (NEHRP) and the National Windstorm Impact Reduction Program (NWIRP). Principal Investigators are encouraged to leverage NSF&rsquo;s investments in the Natural Hazards Engineering Research Infrastructure (NHERI) experimental, computational modeling and simulation, and data resources (https://www.designsafe-ci.org/) in their research to accelerate advances needed for reducing the impacts of natural hazards on infrastructures and people. While physics-based subject-matter knowledge may be crucial in many research efforts, the program does not support research whose primary methodological contribution focuses on individual infrastructure components without a systems research perspective whose primary methodological focus is on geotechnical and structural engineering, material sciences, architectural engineering, wireless communication and sensor technology, human factors, and/or hydrologic or environmental engineering. Proposers are actively encouraged to email a one-page project summary to the ISP Program Officers before submitting a full proposal for guidance on whether the proposed research topic falls within the scope of the ISP program; this guidance should especially be requested for multi-disciplinary research proposals, and proposals for which research and/or development on the subject infrastructure(s) are also supported by other federal and/or state agencies.

This announcement seeks revolutionary research ideas, and technology demonstrators&nbsp;that offer potential for advancement and improvement of NSWC Crane’s primary&nbsp;mission areas. NSWC Crane is a field activity of the Naval Sea Systems Command. NSWC Crane&nbsp;supports a wide range of government agencies in the interest of national security.&nbsp;NSWC Crane may publish BAAs and other solicitations in response to specific needs.&nbsp;This BAA is issued to seek innovative solutions and ideas for topics not covered via&nbsp;other means. It is strongly encouraged that potential proposers review existing NSWC Crane&nbsp;solicitations to avoid duplication of effort and to contact the identified points of contact&nbsp;for each BAA topic to discuss specific details of the needs. The mission of NSWC Crane is to provide research, development, test and evaluation,&nbsp;acquisition engineering, in-service engineering and technical support in its assigned&nbsp;technical capabilities for the United States Navy, Department of Defense components&nbsp;and agencies, and other federal agencies and components engaged in national&nbsp;security. NSWC Crane also works to apply component and system-level product and&nbsp;industrial engineering to surface sensors, strategic systems, special warfare devices&nbsp;and electronic warfare systems, as well as to execute other responsibilities as assigned&nbsp;by the Commander, Naval Surface Warfare Center. The focus of NSWC Crane is “Harnessing the Power of Technology for the Warfighter.” Crane specializes in total lifecycle support in three broad focus areas: Expeditionary&nbsp;Warfare, Strategic Missions, and Electronic Warfare, which support ten assigned&nbsp;technical capabilities (TCs) listed below. 1. Electronic Warfare (EW) 2. Infrared and Pyrotechnic Countermeasures 3. Strategic Systems Hardware 4. Expeditionary Warfare and Systems 5. Advanced Electronics 6. Sensors and Surveillance Systems 7. Hypersonic Weapon Systems 8. Power and Energy Systems 9. Electro-optic and Infrared Technologies 10.Force level EW Mission Analysis, Advanced Concepts and Technologies Within each of the TCs, there are multiple thrust areas, which present considerable&nbsp;opportunities for innovative research and solutions to support national security&nbsp;imperatives. There is intentional overlapping space within the listed TC such that a&nbsp;potential technology or research idea may support multiple TCs. Any proposal should&nbsp;list the principal TC as well as any adjunct TCs that should be considered. Proposals&nbsp;that support multiple TCs are strongly desired but not necessary.

TheProcess Systems, Reaction Engineering, and Molecular Thermodynamicsprogram is part of the Chemical Process Systems cluster, which also includes: 1) theCatalysisprogram; 2) theElectrochemical Systemsprogram; and 3) theInterfacial Engineeringprogram. The goal of theProcess Systems, Reaction Engineering, and Molecular Thermodynamicsprogram is to advance fundamental engineering research on the rates and mechanisms of chemical reactions, systems engineering, and molecular thermodynamics as they relate to the design and optimization of chemical reactors and the production of specialized materials that have important impacts on society. The program supports the development of advanced optimization and control algorithms for chemical processes, molecular and multi-scale modeling of complex chemical systems, fundamental studies on molecular thermodynamics, and the integration of these methods and concepts into the design of novel chemical products and manufacturing processes. This program supports sustainable chemical manufacturing research on the development of energy-efficientchemical processes and environmentally-friendly chemical products through concurrent chemical product/process design methods.Sustainability is also enhanced by research that promotes the electrification of the chemical process industries over current thermally-activated processes. Proposals should focus on: Chemical reaction engineering: This area encompasses the interaction of transport phenomena and kinetics in reactive systems and the use of this knowledge in the design of chemical reactors.Research areas include(1) development of novel reactor designs, such as catalytic and membrane reactors, micro-reactors, chemical vapor and atomic layer deposition systems, (2) studies of reactions in supercritical fluids, (3) novel reaction activation techniques such as atmospheric pressure plasmas (which may be submitted under the ECLIPSE meta-program) and microwave radiation, (4) design of multifunctional and intensified systems, such as chemical-factory/lab-on-a-chip concepts, (5) nanoparticle nucleation, growth, and surface functionalization, and (6) biomass conversion to fuels and chemicals.The program also supports new approaches that enable the design of modular chemical manufacturing systems such as distributed hydrogen and ammonia production processes. Process design, optimization, and control: This area encompasses process systems science, including the development of process modeling, design, control and optimization theory and algorithms; process development proposals are not appropriate for this program.High-priority research topics include process intensification, modular process systems, smart manufacturing, large-scale carbon dioxide capture and conversion, computational tools (including those based on quantum computing methods) enabling advanced chemical manufacturing, real-time optimization and control of large-scale chemical systems with quantitative sustainability metrics, machine learning, and optimization of enterprise-wide processes involving planning, scheduling, and real-time control to create resilient supply chains. Reactive polymer processing: Program scope in this area is limited to research that integrates synthesis and processing to engineer specific nanoscale structures and compositions to tune the macroscopic scale properties of polymers, such as their ability to biodegrade or to be recycled. The focus is on reactive processes that address these environmental concerns while producing tailor-made macromolecular materials. Molecular thermodynamics: This area focuses on fundamental research that combines principles of classical thermodynamics, statistical mechanics, and atomistic-scale simulations to improve chemical processing and to facilitate synthesis of novel functional materials such as catalysts, polymers, solvents, and colloids. Topics include fundamental studies on self- and directed-assembly of nanoscale-level patterned polymer films, machine-learning methods to predict structure-property relationships, large-ensemble molecular dynamics simulations, simulation of peptide self-assembly and protein interactions, and behavior of multiphase and reactive systems under nanoscale confinement. The ultimate goal of research supported by this program is to enable the development of more efficient chemical processes, improve environmental sustainability and water quality, and design functional materials with tailored properties. Innovative proposals outside of these specific interest areas may be considered.However, prior to submission, it is recommended that the Principal Investigator contact the program director to avoid the possibility of the proposal being returned without review. Hypothesis-driven research plans are encouraged. INFORMATION COMMON TO MOST CBET PROGRAMS Proposals should address the novelty and/or potentially transformative nature of the proposed work compared to previous work in the field. Also, it is important to address why the proposed work is important in terms of engineering science, as well as to also project the potential impact on society and/or industry of success in the research. The novelty or potentially transformative nature of the research should be included, as a minimum, in the Project Summary of each proposal. The duration of unsolicited proposal awards in CBET is generally up to three years. Single-investigator award budgets typically include support for one graduate student (or equivalent) and up to one month of principal investigator time per year(awards for multiple investigator projects are typically larger). Proposal budgets that are much larger than typical should be discussed with the Program Director prior to submission. Proposers can view budget amounts and other information from recent awards made by this program via the &ldquo;What Has Been Funded (Recent Awards Made Through This Program, with Abstracts)&rdquo; link towards the bottom of this page. Faculty Early Career Development(CAREER)program proposals are strongly encouraged. Award duration is five years.The submission deadline for Engineering CAREER proposals is in July every year. Learn more in the CAREER program description . Proposals for Conferences, Workshops, and Supplements: PIs are strongly encouraged to discuss their requests with the Program Director before submission of the proposal. Grants forRapid Response Research(RAPID)andEArly-concept Grants for Exploratory Research(EAGER)are also considered when appropriate. Please note that proposals of these types must be discussed with the program director before submission. Grant Opportunities for Academic Liaison with Industry (GOALI)proposals that integrate fundamental research with translational results and are consistent with the application areas of interest to each program are also encouraged. Please note that RAPID, EAGER, and GOALI proposals can be submitted anytime during the year. Details about RAPID, EAGER, and GOALI are available in theProposal &amp; Award Policies &amp; Procedures Guide(PAPPG), Part 1, Chapter II, Section E: Types of Proposals. COMPLIANCE: Proposals which are not compliant with the Proposal and Award Policies and Procedures Guide (PAPPG) will be returned without review.

Synopsis TheCellular and Biochemical Engineering(CBE)program is part of theEngineering Biology and Healthcluster, which also includes: 1) theBiophotonicsprogram; 2) theBiosensingprogram; 3) theDisability and Rehabilitation Engineeringprogram; and 4) theEngineering of Biomedical Systemsprogram. TheCellular and Biochemical Engineeringprogram supports fundamental engineering research that advances understanding of cellular andbiomolecular processes. CBE-funded research may lead to the development of enabling technology for advanced biomanufacturing of therapeutic cells, biochemicals, and biopharmaceuticals, and for otherbiotechnology industrie. The program encourages highly innovative and potentially transformative engineering research leading to novel bioprocessing and biomanufacturing approaches. Fundamental to many CBE research projects is the understanding of how biomolecules, subcellular systems, cells, and cell populations interact, and how those interactions lead to changes in structure, function, and behavior. A quantitative treatment of problems related to biological processes is considered vital to successful research projects in the CBE program. Major areas of interest for the program include: Metabolic engineering and synthetic biology for biomanufacturing, The design of synthetic metabolic components and synthetic cells, Microbiome structure, function, maintenance, and design, Protein and enzyme engineering, and Design of integrated chemoenzymatic systems. The CBE program also encourages proposals that effectively integrate knowledge and practices from different disciplines while incorporating ongoing research into educational activities. All proposals should include a description on the potential impact of proposed research on an associated biomanufacturing process. Proposals whose core innovation involves tissue engineering, organ culture, development of models of healthy or diseased physiology, or design and application of technologies focused on the diagnosis or treatment of disease should be submitted to theEngineering ofBiomedicalSystemsprogram(CBET 5345). Innovative proposals outside of these specific interest areas may be considered. However, prior to submission, it is recommended that the Principal Investigator contact the program director to avoid the possibility of the proposal being returned without review. INFORMATION COMMON TO MOST CBET PROGRAMS Proposals should address the novelty and/or potentially transformative nature of the proposed work compared to previous work in the field. Also, it is important to address why the proposed work is important in terms of engineering science, as well as to also project the potential impact of success in the research on society and/or industry. The novelty or potentially transformative nature of the research should be included, as a minimum, in the Project Summary of each proposal. The duration of unsolicited proposal awards in CBET is generally up to three years. Single-investigator award budgets typically include support for one graduate student (or equivalent) and up to one month of principal investigator time per year(awards for multiple investigator projects are typically larger). Proposal budgets that are much larger than typical should be discussed with the Program Director prior to submission. Proposers can view budget amounts and other information from recent awards made by this program via the &ldquo;What Has Been Funded (Recent Awards Made Through This Program, with Abstracts)&rdquo; link towards the bottom of this page. Faculty Early Career Development(CAREER) program proposals are strongly encouraged. Award duration is five years. The submission deadline for Engineering CAREER proposals is in July every year. Learn more in the CAREER program description . Proposals for Conferences, Workshops, and Supplements : Principal Investigators are strongly encouraged to discuss their requests with the Program Director before submission of the proposal. Grants forRapid Response Research(RAPID) and EArly-concept Grants for Exploratory Research(EAGER) are also considered when appropriate. Please note that proposals of these types must be discussed with the program director before submission. Grant Opportunities for Academic Liaison with Industry (GOALI) proposals that integrate fundamental research with translational results and are consistent with the application areas of interest to each program are also encouraged. Please note that RAPID, EAGER, and GOALI proposals can be submitted anytime during the year. Details about RAPID, EAGER, and GOALI are available in the Proposal &amp; Award Policies &amp; Procedures Guide(PAPPG), Part 1, Chapter II, Section E: Types of Proposals. Compliance : Proposals that are not compliant with the Proposal &amp; Award Policies &amp; Procedures Guide (PAPPG) will be returned without review.

The Disability and Rehabilitation Engineering program is part of the Engineering Biology and Health cluster, which also includes: 1) the Biophotonics program; 2) the Biosensing program; 3) the Cellular and Biochemical Engineering program; and 4) the Engineering of Biomedical Systems program. The Disability and Rehabilitation Engineering program supports fundamental engineering research that will improve the quality of life of persons with disabilities through the development of new theories, methodologies, technologies, or devices. Disabilities could be developmental, cognitive, hearing, mobility, visual, selfcare, independent living, or other. Proposed projects must advance knowledge regarding a specific human disability or pathological motion or understanding of injury mechanisms. Research may be supported that is directed toward the characterization, restoration, rehabilitation, and/or substitution of human functional ability or cognition, or to the interaction between persons with disabilities and their environment. Areas of particular interest are neuroengineering, rehabilitation robotics, brain-inspired assistive or rehabilitative systems, theoretical or computational methods, and novel models of functional recovery including the development and application of artificial physiological systems. Emphasis is placed on significant advancement of fundamental engineering knowledge that facilitates transformative outcomes. The DARE Program encourages high-risk/high-reward proposals that surpass incremental technological improvements. The DARE Program also encourages participatory design and the inclusion of trainees with disabilities as part of the proposed research or broader impacts. Innovative proposals outside of the above specific interest areas may be considered. However, prior to submission, it is recommended that the PI contact the Program Director to avoid the possibility of the proposal being returned without review. NSF does not support clinical trials; however, feasibility studies involving human volunteers may be supported if appropriate to the project objectives. The development and application of artificial physiological systems that do not model functional recovery and instead improve fundamental understanding of physiological and pathophysiological processes would be appropriate for EBMS. Furthermore, the DARE program does not support proposals having as their central theme commercialization of a product. Small businesses seeking early stage R&amp;D funding for product development are encouraged to contact the NSF SBIR/STTR program in the America's Seed Fund within the Directorate for Technology, Innovation and Partnerships (TIP). INFORMATION COMMON TO MOST CBET PROGRAMS Proposals should address the novelty and/or potentially transformative nature of the proposed work compared to previous work in the field. Also, it is important to address why the proposed work is important in terms of engineering science, as well as to also project the potential impact of success in the research on society and/or industry. The novelty or potentially transformative nature of the research should be included, as a minimum, in the Project Summary of each proposal. The duration of unsolicited proposal awards in CBET is generally up to three years. Single-investigator award budgets typically include support for one graduate student (or equivalent) and up to one month of principal investigator time per year (awards for multiple investigator projects are typically larger). Proposal budgets that are much larger than typical should be discussed with the Program Director prior to submission. Proposers can view budget amounts and other information from recent awards made by this program via the "What Has Been Funded (Recent Awards Made Through This Program, with Abstracts)" link towards the bottom of this page. Faculty Early Career Development (CAREER) program proposals are strongly encouraged. Award duration is five years. The submission deadline for Engineering CAREER proposals is in July every year. Learn more in the CAREER program description . Proposals for Conferences, Workshops, and Supplements: PIs are strongly encouraged to discuss their requests with the program director before submission of the proposal. Grants for Facilitation Awards For Scientists And Engineers With Disabilities (FASED), EArly-concept Grants for Exploratory Research (EAGER), and Rapid Response Research (RAPID) are also considered when appropriate. Please note that proposals of these types must be discussed with the program director before submission. Grant Opportunities for Academic Liaison with Industry (GOALI) proposals that integrate fundamental research with translational results and are consistent with the application areas of interest to each program are also encouraged. Please note that FASED, EAGER, RAPID, and GOALI proposals can be submitted anytime during the year. Details about FASED, EAGER, RAPID, and GOALI are available in the Proposal &amp; Award Policies &amp; Procedures Guide (PAPPG), Part 1, Chapter II, Section E: Types of Proposals. Compliance: Proposals that are not compliant with the Proposal &amp; Award Policies &amp; Procedures Guide (PAPPG) will be returned without review.

TheEngineering of Biomedical Systemsprogram is part of the Engineering Biology and Health cluster, which also includes: 1) theBiophotonicsprogram; 2) theBiosensingprogram; 3) theCellular and Biochemical Engineeringprogram; and 4) theDisability and Rehabilitation Engineeringprogram. The goal of theEngineering of Biomedical Systems(EBMS) program is to provide opportunities for fundamental and transformative research projects that integrate engineering and life sciences to solve biomedical problems and serve humanity in the long term. Projects are expected to use an engineering framework (for example, design or modeling) that supports increased understanding of physiological or pathophysiological processes. Projects must include objectives that advance both engineering and biomedical sciences. Projects may include: methods, models, and enabling tools applied to understand or control living systems; fundamental improvements in deriving information from cells, tissues, organs, and organ systems; or new approaches to the design of systems that include both living and non-living components for eventual medical use in the long term. TheEBMS programsupports fundamental and transformative research in the following areas of biomedical engineering: Developmentof validated models (living or computational) of healthy and pathological tissues and organ systems that can support improved fundamental understanding of these systems or that could be applied in the future for development and testing of medical interventions; Designand validation of systems that integrate living and non-living componentsfor improved understanding of physiology that could be applied in the future for diagnosis, monitoring, and treatment ofdisease or injury; Design and subsequent application of technologies andtools toinvestigate fundamental physiological and pathophysiological processes; Advancedbiomanufacturing of three-dimensional tissues and organs; and Application of engineering tools and principles, including mathematical modeling, to quantitatively study the immune system in health and disease and to develop techniques for controlling and modulating a host&rsquo;s immune response to challenges such as infectious diseases, cancer, implants, autoimmune disorders, wounds, etc. The long-term impact of the projects can be related to effective disease diagnosis and/or treatment, or improved health care delivery. However, immediate goals should focus on improved fundamental understanding of cell and tissue function in normal or pathological conditions and advancing biomedical engineering. Innovative proposals outside of these specific areas of biomedical engineering may be considered.However, prior to submission, it is strongly recommended that the PIs contact the program director to avoid the possibility of the proposal being returned without review. Related programs also fund biomedical engineering research, and PIs are encouraged to examine these to find the appropriate program for submission. The EBMS program does not support proposals having as their central theme drug design and delivery, the development of biomedical devices that do not include a living biological component, or thedevelopment of animal models of disease.For consideration by the EBMS program, proposals that advance the design of tools or technologies should also apply those technologies to advance knowledge in biomedical science. NSF does not support clinical trials; however, feasibility studies involving human volunteers may be supported if appropriate to the project objectives. Projects with a central focus on design or optimization of a device, material, algorithm, or process alone without exploring new fundamental biomedical science are not appropriate for the EBMS program. Furthermore, although research on biomaterials, cellular biomechanics, manufacturing systems, or algorithm/device design may constitute a part of the proposed studies, such research can be more appropriately targeted to other NSF programs: Projects that aim to improve protein engineering or cellular biomanufacturing - either manufacturing cells or cell-derived products - should consider the Cellular and Biochemical Engineering (CBE) program. Projects that focus on the development and application of microphysiological systems that model functional recovery related to a specific human disability or injury mechanism should consider the Disability and Rehabilitation Engineering (DARE) program. Biomaterials-focused projects should consider the Biomaterials (BMAT) program in the Division of Materials Research (DMR). Cellular and tissue biomechanics projects should consider the Biomechanics and Mechanobiology (BMMB) program in the Division of Civil, Mechanical, and Manufacturing Innovation (CMMI). Manufacturing systems proposals should consider the Advanced Manufacturing(AM) program in the Division of Civil, Mechanical, and Manufacturing Innovation (CMMI). Innovative research on signal processing techniques or dynamic biosensing systems should consider the Communications, Circuits, and Sensing-Systems (CCSS) program in the Division of Electrical, Communications and Cyber Systems (ECCS). Innovative research on novel devices based on the principles of electronics, optics and photonics, optoelectronics, magnetics, opto- and electromechanics, electromagnetics, and related physical phenomena, also including material-device interaction, should consider the Electronics, Photonics and Magnetic Devices (EPMD) Program in the Division of Electrical, Communications and Cyber Systems (ECCS). INFORMATION COMMON TO MOST CBET PROGRAMS Proposals should address the novelty and/or potentially transformative nature of the proposed work compared to previous work in the field. Also, it is important to address why the proposed work is important in terms of engineering science, as well as to also project the potential impact of success in the research on society and/or industry. The novelty or potentially transformative nature of the research should be included, as a minimum, in the Project Summary of each proposal. The duration of unsolicited proposal awards in CBET is generally up to three years. Single-investigator award budgets typically include support for one graduate student (or equivalent) and up to one month of PI time per year(awards for multiple investigator projects are typically larger). Proposal budgets that are much larger than typical should be discussed with the program director prior to submission. Proposers can view budget amounts and other information from recent awards made by this program via the &ldquo;What Has Been Funded (Recent Awards Made Through This Program, with Abstracts)&rdquo; link towards the bottom of this page. Faculty Early Career Development(CAREER)program proposals are strongly encouraged. Award duration is five years. The submission deadline for Engineering CAREER proposals is in July every year. Learn more in the CAREER program description . Proposals for Conferences, Workshops, and Supplements: PIs are strongly encouraged to discuss their requests with the program director before submission of the proposal. Grants forRapid Response Research(RAPID)andEArly-concept Grants for Exploratory Research(EAGER)are also considered when appropriate. Please note that proposals of these types must be discussed with the program director before submission.Grant Opportunities for Academic Liaison with Industry (GOALI)proposals that integrate fundamental research with translational results and are consistent with the application areas of interest to each program are also encouraged. Please note that RAPID, EAGER, and GOALI proposals can be submitted anytime during the year. Details about RAPID, EAGER, and GOALI are available in the Proposal &amp; Award Policies &amp; Procedures Guide(PAPPG), Part 1, Chapter II, Section E: Types of Proposals. Compliance: Proposals that are not compliant with the Proposal &amp; Award Policies &amp; Procedures Guide (PAPPG) will be returned without review.

The Catalysis program is part of the Chemical Process Systems cluster, which also includes: 1) the Electrochemical Systems program; 2) the Interfacial Engineering program; and 3) the Process Systems, Reaction Engineering, and Molecular Thermodynamics program. The goals of the Catalysis program are to increase fundamental understanding in catalytic engineering science and to advance the development of catalysts and catalytic reactions that are beneficial to society. Research should focus on critical challenges and opportunities in both new and proven catalysis technologies. Areas of emphasis may include novel catalyst compositions, structures, operating environment, data science tools, theory, and modeling &ndash; preferably in various combinations as dictated by the specific reaction and related knowledge and technology gaps. Target applications include fuels, specialty and bulk chemicals, environmental catalysis, biomass conversion to fuels and chemicals, greenhouse gas mitigation, recycling of waste materials, generation of solar hydrogen, as well as efficient routes to energy utilization. Heterogeneous catalysis represents the main thrust of the program. Proposals related to both gas-solid and liquid-solid heterogeneous catalysis are welcome, as are proposals that incorporate concepts from homogeneous catalysis. Recent research trends have highlighted the need for evaluation of catalyst performance and properties under working conditions, especially as supported by advanced in situ and in operando characterization methods. Catalyst synthesizability and stability present additional research opportunities given the harsh operating environments of many catalytic processes. Topic areas of particular interest include: Energy-related catalysis, utilizing renewable or sustainable energy in lieu of thermal, fossil fuel-based technologies, especially applications in electrocatalysis, photocatalysis, and catalytic conversion of biomass-derived chemicals, and also including fuel cell catalysis. Catalysis aimed at closing the carbon cycle (especially conversion of carbon dioxide, methane, and natural gas to fuels and chemical intermediates). Heterogeneous catalytic alternatives to traditionally non-catalytic or homogeneous reaction processes, as well as new catalyst designs for established catalytic processes. Environmental catalysis focused on mitigating both air and water pollutants, and supporting energy-efficient upcycling of waste materials to higher-value products. Catalytic remediation of feedstocks, process streams, products, or effluents. Commercially scalable methods of catalyst synthesis, including durable, poison-resistant, and easily regenerable catalyst formulations and designs. New catalytic materials and architectures (especially those substituting earth-abundant materials for precious and noble metal catalysts). Basic understanding of catalytic materials, reaction pathways, kinetics, and surface reaction mechanisms. Advanced tools for catalyst characterization and theoretical/computational catalysis. Proposals that deal with new catalytic materials, especially when viewed in light of the inherent complexity of heterogeneous catalytic reactions, will be enhanced by including plans to assess: 1) reproducibility and repeatability of data, 2) stability under realistic operating conditions including start-up and shut-down cycles, 3) performance relative to standard or well-known reference materials, and 4) quantitative, well-accepted measures of catalyst activity, selectivity, and catalytic efficiency, such as turnover frequencies, quantum and/or photon yields of photocatalysts, Faradaic efficiency of electrocatalytic reactions, and detailed product analyses and mass balances for the targeted application. NOTE: Proposals that focus on 1) molecular or homogeneous catalysis, 2) the surface science of catalysis, 3) photo redox catalysis, 4) catalytic organic synthesis reactions, and/or 5) fine chemical synthesis and pharmaceutical applications of catalysis may be more appropriately submitted to the Chemical Catalysis program.(CHE 6884) in the Division of Chemistry in the Directorate for Mathematical and Physical Sciences. Proposals focused on biocatalytic processes, including proposals focusing on enzyme engineering, cellular and biomolecular processes, should be submitted to the Cellular and Biochemical Engineering program (CBET 1491). If the proposal focuses on reaction engineering aspects of catalytic processes, submit to the Process Systems, Reaction Engineering, and Molecular Thermodynamics program (CBET 1403). Projects that are interdisciplinary in nature may be jointly funded with other CBET and NSF programs. Program directors will review the submissions and may transfer your proposal to give it the best review situation. Innovative proposals outside of these specific interest areas may be considered. However, prior to submission, it is recommended that the Principal Investigator contact the program director to avoid the possibility of the proposal being returned without review. INFORMATION COMMON TO MOST CBET PROGRAMS Proposals should address the novelty and/or potentially transformative nature of the proposed work compared to previous work in the field.Also, it is important to address why the proposed work is important in terms of engineering science, as well as to also project the potential impact on society and/or industry of success in the research.The novelty or potentially transformative nature of the research should be included, as a minimum, in the Project Summary of each proposal. The duration of unsolicited proposal awards in CBET is generally up to three years. Single-investigator award budgets typically include support for one graduate student (or equivalent) and up to one month of principal investigator time per year(awards for multiple investigator projects are typically larger). Proposal budgets that are much larger than typical should be discussed with the program director prior to submission. Proposers can view budget amounts and other information from recent awards made by this program via the ?What Has Been Funded (Recent Awards Made Through This Program, with Abstracts)? link towards the bottom of this page. Faculty Early Career Development(CAREER)program proposals are strongly encouraged. Award duration is five years.The submission deadline for Engineering CAREER proposals is in July every year. Learn more in the CAREER program description . Proposals for Conferences, Workshops, and Supplements: PIs are strongly encouraged to discuss their requests with the rogram director before submission of the proposal. Grants forRapid Response Research(RAPID)andEArly-concept Grants for Exploratory Research(EAGER)are also considered when appropriate. Please note that proposals of these types must be discussed with the program director before submission. Grant Opportunities for Academic Liaison with Industry (GOALI)proposals that integrate fundamental research with translational results and are consistent with the application areas of interest to each program are also encouraged. Please note that RAPID, EAGER, and GOALI proposals can be submitted anytime during the year. Details about RAPID, EAGER, and GOALI are available in theProposal &amp; Award Policies &amp; Procedures Guide(PAPPG), Part 1, Chapter II, Section E: Types of Proposals. COMPLIANCE: Proposals which are not compliant with the Proposal &amp; Award Policies &amp; Procedures Guide (PAPPG) will be returned without review.

The National Facilities program supports the operation of national user facilities: National Facilities areresearch facilities with specialized instrumentation available to the scientific research community in general and the materials research community in particular.These facilities provide unique research capabilities that can be located at only a few highly specialized laboratories in the Nation. They provide open user service for scientists and engineers from a broad range of disciplines including biology, chemistry, geosciences, materials research. and physics. Theyinclude facilities and resources for research using high magnetic fields, ultraviolet and x-ray synchrotron radiation, neutron scattering, and nanofabrication. Theyserve as science and technology-related resources and experiences for students. Theyconduct student and teacher education, general public awareness activities, curriculum development, and educational research.

The Foundational Research in Robotics (FRR) program, jointly led by the CISE and ENG Directorates, supports research on robotic systems that exhibit significant levels of both computational capability and physical complexity. For the purposes of this program, a robot is defined as intelligence embodied in an engineered construct, with the ability to process information, sense, plan, and move within or substantially alter its working environment. Here intelligence includes a broad class of methods that enable a robot to solve problems or to make contextually appropriate decisions and act upon them. The program welcomes research that considers inextricably interwoven questions of intelligence, computation, and embodiment. Projects may also focus on a distinct aspect of intelligence, computation, or embodiment, as long as the proposed research is clearly justified in the context of a class of robots. The focus of the FRR program is on foundational advances in robotics. Robotics is a deeply interdisciplinary field, and proposals are encouraged across the full range of fundamental engineering and computer science research challenges arising in robotics. To be responsive to the FRR program, each proposal should clearly articulate the following three points: The focus of the research project should be a robot or a class of robots, as defined above. [Is there a robot?] The goal of the project should be to endow a robot or a class of robots with new and useful capabilities or to significantly enhance existing capabilities. [Will a robot gain a new or significantly improved capability?] The intellectual contribution of the proposed work should address fundamental gaps in robotics. [Is robotics essential to the intellectual merit of the proposal?] Meaningful experimental validation on a physical platform is encouraged. Projects that do not represent a direct fundamental contribution to the science of robotics or are better aligned with other existing programs at NSF should not be submitted to the FRR program. Potential investigators are strongly encouraged to discuss their projects with an FRR Program Officer before submission. Non-compliant proposals may be returned without review.